Pneumatic pumps

Flow: 0.3, 0.5, 1, 2 l/min
Pressure: 1,000, 670, 250, 160 bar

... supercritical fluids such as CO2 (with mounted pump head cooling device)metering against constant pressureThe delivery flow rate depends on the compressed air supply and the back pressure ...

Pressure: 5 bar - 8.5 bar
Fluid temperature: 0 °C - 49 °C

... filter/regulator/lubricator) to control air to recommended operating range. Normally, the air-operated Airmatic is used with a 3/2-way electrical solenoid valve (optional) to control and vent shop air ...

Flow: 0 l/h - 6,000 l/h
Pressure: 0 Pa - 500,000 Pa
Fluid temperature: 5 °C - 180 °C

... Additionally the occuring pulsation could be minimised. Depending on the pump type the stroke rate differs. Contamination free design All liquid end prats are made of fluoro resin. The pump is so ...

Flow: 0 us gal/min - 54 us gal/min
Pressure: 8.6 bar
Head: 88 m

... performance of AODD pump technology. Known for durability and cleanliness, these 1" FDA-compliant pumps are versatile and are regularly used in applications ranging from transfer of hot cooking oils ...

Flow: 8 l/min - 135 l/min
Head: 10.5, 11.5, 14.2, 20.3 m
Power: 10 W - 265 W

Corrosion resistant, compact magnetic drive pumps Features of MD-F / MD-V series Superior corrosion resistance Manufactured mainly from superior corrosion-resistant CFRETFE, the pumps ...

Flow: 0 l/min - 0.3 l/min
Pressure: 2,000 psi - 10,000 psi

... Series D continuous-flow systems couple two pump modules to a single controller, and use an active or passive valve manifold to provide non-stop, continuous feed of almost any fluid. The controller refills one pump ...

Flow: 11 l/min - 17 l/min
Pressure: 2 bar - 8 bar
Head: 0 m - 80 m

... designed and constructed in Italy ■ PATENTED stall-prevention pneumatic circuit ■ Operates with non-lubricated air ■ SELF-PRIMING ■ Dry operation ■ ATEX certification for ZONE 1 - ZONE 2 ■ Adjustable ...

Flow: 0 l/min - 1.1 l/min
Pressure: 0 bar - 2,500 bar
Length: 405 mm

... other fluids The MPS is a handy portable air driven mini pump that can be easily carried because of its weight (less than 17 kg with a filled tank) and size (405 x 308 x 365 mm). Although this mini ...

Flow: 7 l/min
Pressure: 6 bar
Head: 60 m

... double-diaphragm pump gives process managers a versatile solution to almost any chemical dosing or liquid transfer application. Free of electrical components, Duotek can be fully submerged without any affect on performance, ...

Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar

Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...

Flow: 5, 10.5 l/min
Power: 0.06 kW

- Working Pressure: 1 - 5 Kg/cm - Max. painting pressure: 5 Kg/cm - Max. pump speed: 160 times/min. - Air consumption: 11.5 CFM - Free speed: (1:1) 5 200 RPM - Agitation shaft: 8 mm - Proppeler: 60 mm -Diameter ...

The EUR 1 pneumatic pump is a single-acting pump suitable for all types of applications. The maximum amount of grease supplied during every pumping cycle is 30 cm³ (an amount that is ...

Flow: 0 us gal/min - 20 us gal/min

Alemite Stationary RAM Pumps deliver fast, quiet and efficient operation, and are rugged enough to handle challenging oil applications. RAM pumps are durable, and can operate at rates up to 20 gallons ...

Flow: 10 l/min
Pressure: 16 bar
Fluid temperature: 10 °C - 60 °C

PNEUMATIC PUMP FOR FRESH OIL REMOTE OIL EQUIPMENT TPKE, LEGALLY CALIBRATABLE This pneumatically-driven piston pump is used for the conveying of lubricants and similar fluids when the ...

The Bigas Alsina, S.A. blood pumps, are designed to allow the transport of this waste material in an efficient way, avoiding all those problems that ussualy arise inside the pumps, due in most cases because ...

... also used in the transfer of recycled powder enamel with a recycling system. Please contact us for Strong3000 enamel transfer pump spare parts.

Pressure: 45, 30 bar
Length: 132 mm
Width: 102 mm

Medium pressure volumetric pneumatic pump comprising: pneumatic cylinder, volumetric pump, one-way release check valve, pair of 3/2 solenoid valves, pressure gauge and ...

Flow: 35 l/min
Pressure: 1 bar - 4 bar
Length: 140 mm

Pneumatic, selfpriming rotary vane pump for the transfer of petrol, with body in cast iron with anticorrosive coating and plastic rotor. Earth cable to enable an electrostatic discharge on demand. The ...

Flow: 70 l/min - 100 l/min
Head: 6 m - 12 m
Power: 420 W

Product Details Pump Tube Material: PP Pump Shaft Material: Hastelloy Pump Pipe Length: 1200 or 1000 mm Diameter of Pump Pipe: 41mm Sealing: Non-seal, exact solution! ...

Flow: 18 l/min

... heavy-duty solution for medium to large workshops or mobile applications. Stub pumps are best suited for wall or remote mounting. Technical Specifications 10:1 ratio pump for medium flow / very long ...

Flow: 0 l/min - 50 l/min
Pressure: 0 Pa - 12,000,000 Pa

Pneumatic pump units with a mechanical limit switch.

... . T6000 SERIES PUMPS Features 6 inch air cylinder Available in 9 different pump ratios 2.5 inch pump stroke Maximum operating pressure of 58,000 psi (4000 bar) Maximum ...

Flow: 75 l/min
Pressure: 0 bar - 8.4 bar
Head: 84 m

... indefinitely. It cannot air bind, has no stator to burn out, and no seal to fail. The ODS Pump is adjustable while in operation for maximum flexibility of both the capacity and discharge pressures. The ...