Pneumatic valves

... Mounted Ball Valve With Pneumatic Actuator The smallest the fluid resistances among all valves even reduced-bore ball valves have relatively small fluid resistance. ...

Pressure: 150,000 Pa - 1,000,000 Pa

... at the bottom of water cup for auto dischargers, air filters and air filter regulators and can auto discharge the condense water gathered in the water cup. Feature Auto draimer Manual Drain Air ...

DN: 4 in

The Liquip LBV450VGL Butterfly Valve has a lightweight and durable design that enables it to provide and control full flow through pipelines fitted with 100-mm (4”) Tank Truck Manufacturers Association (TTMA) flanges. Features ...

DN: 15 mm - 800 mm
Pressure: 16 bar - 420 bar
Temperature: -100 °C - 720 °C

GUIDED SPHERE VALVE METAL SEAT WIDE RANGE The KTN SAT is the best KTN design to solve the widest range of applications. The main goal of this design is its philosophy of achieving the highest security using unmatched ...

DN: 50 mm - 400 mm
Pressure: 5, 6, 7, 8, 10 bar

Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, ...

DN: 50 mm - 600 mm
Pressure: 6, 8, 3, 4, 10 bar
Temperature: 230, 120, 200, 105 °C

... steel shut-off-valves are not necessary available in various seal types areas of application: one part gate valve for industrial use nominal diameters:DN 50 - 600 (2 - 24") material:ductile ...

DN: 15 mm - 150 mm
Pressure: 16, 40 bar

WAFER LUG BALL VALVE - BODY INOX - NP 16/40 - DOUBLE ACTING ACTUATOR Wafer lug type Ball valve : - Flanged (threaded holes) - NP 16/40 - AISI 316 stainless steel - TFM 1600 seats - FKM o-ring - ...

Pressure: 10 bar
Temperature: 150 °C

... request. Internal Assembly The internal assembly includes two valve seat seals by default. Valve seat A can be executed either with a shrunk or screwed valve seat seal, whereas valve ...

DN: 50 mm - 600 mm

Use : Handling used/Gate used for the handling of solids (ganular, pulverulents…), and main application in exit of silo. Body shape : Wafer Type : 1511 Tightness: Metal/metal Face to face : According to manufacturer standard Operation ...

DN: 655 mm
Pressure: 1.2 bar
Temperature: 50 °C - 120 °C

... dust. It's vailable with ISO 250 flanges in sizes 10" and can be operated in pneumatic or APC mode. This vacuum valve is usually designed as a gate valve or a pendulum valve, ...

DN: 100 mm - 400 mm

Aluminum butterfly valve for handling powders available from Ø100 to Ø400 mm. The valve can be supplied for hot materials with manual lever or pneumatic drive.

DN: 1, 0.375, 0.5, 0.25 in

iPolymer Water Valve (WV) is manufactured in three material choices: PVC, Polypropylene, or PVDF. The valve has a spring return and is pneumatically actuated to open ...

DN: 0.5 in - 2 in
Pressure: 250 psi
Temperature: 70 °F

... automated PMD pneumatic actuator unit along with the TB series ball valve. It is a double acting air-to-open and close that comes with a soleniod valve with optional voltages. The FPM ...

DN: 25 mm - 100 mm
Pressure: -1 bar - 10 bar
Temperature: -80 °C - 200 °C

The Aseptic valve functions primarily for food or pharmaceutical processing. It is suitable for direct installation in tanks and reactors preparation. Aseptic valves can be manual or pneumatic, ...

DN: 3 in - 24 in

... AIS-compliant knife gate valve is now available from DeZURIK. The AIS-compliant knife gate valve is based on DeZURIK’s successful KGC-BD design which is a cast stainless steel, resilient seated and bi-directional ...

DN: 50 mm - 300 mm
Pressure: 10 bar

Replaceable top packing gland enables sealing replacement without disassembly of the valve The valve is self-cleaning when opening the valve, an additional scraper is available for extra ...

... pipeline applications. Gate valves are linear motion devices used open and close the flow of the fluid (shutoff valve). Gate valves cannot be used for throttling applications, i.e. to ...

Pneumatic butterfly valve has good two-way sealing function, it is used in pipelines of different media in petroleum, chemical industry, metallurgy, electricity, food, medicine, water supply and drainage, ...

... Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable bulk materials Configurations Non_stic|< coating, liner, coating. Actuation: manual, electric, or pneumatic Made ...

DN: 15 mm - 150 mm
Pressure: 40 bar
Temperature: -40 °C - 300 °C

The valve is fitted directly in the process line or on a by-pass. A constant flow through the valve guarantees a directly representative sample

Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C

... outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral ...

DN: 15 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C

Material sealing element (in contact with medium): EPDM | FPM reliable and economical good control characteristics high kv value visual position indicator

DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C

Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● ...

The Model DGV Deluge Valve is designed for use in controlling water flow to deluge, pre-action or foam-water type fire protection sprinkler systems. This valve is UL Listed in Special Systems Water Control ...

... are situated outside the product stream, their standard execution is service-free (until approx. 200 degrees C). The pneumatic design allows the flap quick opening, so that the product stream is not deviated. Also ...