- Hydraulics - Pneumatics >
- Valve >
- Pneumatically-operated valve
Pneumatically-operated valves
DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C
... ®, CTFE Valve Stem 17-4 Stainless Steel Remaining Parts -316 Stainless Steel, Brass Flow CapacityVA Series -Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA ...
DN: 19, 30 mm
Pressure: 30 mbar - 5,500 mbar
Temperature: -20, -30, 66 °C
The Type VS100 slam shut is constructed in such a way that it shuts off the gas flow to the downstream system when the outlet pressure goes above or declines below the predefined levels. Type VS100 slam shut has a ductile iron and ...
FISHER REGULATORS
DN: 0.125 in - 0.5 in
Pressure: 35 psi - 130 psi
Temperature: 0 °F - 160 °F
Soft-start valves allow pneumatic components to be pressurized slowly for safety and control. MGV series soft-start valves are available with port sizes from 1/8" NPT to 1/2" NPT and ...
Bimba
DN: 15 mm - 50 mm
Pressure: 16 bar - 25 bar
Temperature: -10 °C - 200 °C
Special features • - Consisting of single-seated globe valve and actuator Accessories • - Type 2 NI Strainer Options • - Version for steam
DN: 6 mm - 16 mm
Ventilation elements Air valve, pneumatically activated Air Valve
Pressure: 4 bar - 6 bar
Jet Edge’s patented Dual Pressure Valve is a remotely mounted valve that allows waterjet operators to control water pressure independently of the intensifier pump. This enables operators to run a number ...
Temperature: 5 °C - 150 °C
Series XLA-2 are high vacuum angle valves for use in industrial applications employing high vacuum and process gases. Common industries that may use these angle valves include semiconductor, solar and ...
SMC Corporation of America
DN: 0.5 in - 2 in
Temperature: 14 °F - 356 °F
... while maintaining flow rates with the compact Series SAV-BT Angle Seat Valve. The pneumatic, externally piloted angle seat valve is operated by a single acting actuator with a mechanical ...
DN: 50 mm - 225 mm
Pressure: 0.8 bar - 4 bar
Temperature: -10 °C - 80 °C
Applications The two-/three-way hose-type diverter valve ZWS/DWS is a distribution or collection unit for pneumatic conveying systems up to 4 bar (g) of powders and pellets in various industrial sectors. Design ...
Zeppelin Silos & Systems
DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 120 °C
Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devicesions due to special features ...
Praher Plastics Austria GmbH
DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar
... control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without the need to disassemble the valve, ...
SOMAS
DN: 20 mm - 150 mm
Pressure: 3.5 bar - 6 bar
Temperature: 135 °C - 180 °C
... air, water, gas, steam in textile, power generator, paper & pulp, chemical, petrochemical industries, PSA nitrogen system, air dryers, gas generators & others. Upto 50 mm 300 cy/hr.,(tested on air,on other fluids this ...
Avcon Controls PVT. Ltd.
DN: 0.5, 0.75 in
Pressure: 10 bar
Temperature: 75 °C
... thermoplastics used in valves and piping systems. Applications ranging from the harshest of chemicals to the purest of hot DI water are ideal. No other known thermoplastic offers as much versatility in chemical resistance ...
Asahi/America, Inc.
DN: 50 mm
Pressure: 10 bar
Temperature: -20 °C
Standard sampling valve with a double acting pneumatic actuator. Proximity switch detects the open / closed position of the valve.
FAMAT
DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F
... The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with NIBCO® Series 2000 ...
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C
Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and ...
VAG-Group
DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C
Compact positioner with analogue control. Compressed air for remote control necessary. The stroke is made proportional to the flow through the parabolic contour of the piston. The valve ...
DN: 50 mm - 1,500 mm
Pressure: 400 bar
Temperature: -196 °C - 450 °C
Trunnion mounted split body ball valves, double block and bleed function, for oil and gas standard and severe applications The FCT Split Body trunnion mounted ball valves have been designed for severe ...
Pentair Valves & Controls
DN: 25, 50, 16, 40 mm
Pressure: 4.5 bar - 7 bar
Temperature: 100, 80, 50 °C
The low-priced mini vacuum gate valve is well suited for industrial and R&D applications. It is often used in pipings of industrial systems.
VAT Vakuumventile AG
... of isolation valve. The manufacturer is a great provider of bellows, manually, pneumatic or electro pneumatic valves. These valves are placed in a heated or unheated ...
DN: 50 mm - 200 mm
Pressure: 10 bar - 40 bar
... Coating: Epoxy, Enamel Automatic air admission and air release of water pipelines in plants, buildings and valve chambers. For potable water. Automatic air admission ...
ERHARD
DN: 15 mm - 50 mm
Pressure: 10 bar - 25 bar
Temperature: -271 °C - -30 °C
... Easy replacement of the compatible valve inserts - Prepared for installation into vacuum-jacketed lines - Cryogenic valve and filter series (globe or control valve, filter) in standard ...
STÖHR ARMATUREN GmbH & Co KG
DN: 0.5 in - 2.5 in
Temperature: 105 °C
... The Roda Deaco RDS1 Swing Gate Valve is a compact air intake shutoff valve that provides emergency overspeed shutdown of a diesel engine. The RDS1 Swing Gate Valve can ...
AMOT
DN: 5 mm - 16 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C
... seals: NBR Valves in accordance with 2014/34/EU (ATEX) available. (Chapter 13) A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control ...
AIRTEC Pneumatic
The actuator pilots of the OS Series are especially designed for pressure control in regulators and shutoff valves, they can operate on maximum and minimum pressure, on maximum only, on minimum only.
Tartarini
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining