Power supplies

Input voltage: 100 V - 240 V
Output voltage: 230 V
Current: 1 A

... ) .........20ms Min.  - Over Voltage Protection...............Auto Recovery  - Overload Protection.....................Power Limited  - Short Circuit Protection............... Auto Recovery

Input voltage: 100 V - 250 V
Output voltage: 12.2, 24 V
Current: 2,500, 1,250 mA

Product properties - DIN rail mountable - Stabilised 12 or 24 V DC output - Overvoltage and short circuit protection Applications - Power supply for transmitters and ...

... voltage *Cooling by free air convection *Can be installed on DINrail TS-35/7.5 or 1 *5Isolation class II *LED indicator for power on *100% full load burn-in test *3 years warranty

... achievable Up to 750 mW standby output power for 1 W input at 230 VAC High Design Flexibility for Low System Cost Multi-mode PWM control maximizes efficiency at all loads 132 kHz operation reduces transformer and power ...

Output voltage: 5 V - 30 V
Current: 1 A - 5 A

These power supplies possesses the major advantages given by the use of linear and commutation technology. Output characteristics equal to those found in linear devices are obtained.

PSS480/24/20,480W Single Phase Din Rail Mountable Switching Power Supplies -Full Range Input selection from 90 to 264 VAC Auto select -Typical efficiency of 90% -Compact design with a width of only ...

Input voltage: 180 V - 264 V
Output voltage: 0 V - 400 V
Current: 10 A - 240 A

Features Output Rating: AC 0 – 400 Vrms, DC 0 - ± 570 V Output Frequency up to 999.9 Hz DC Output (100% of Rated Power) Measurement Items: Vrms, Vavg, Vpeak, Irms, ...

Input voltage: 240 V
Output voltage: 0 V - 1,000 V
Current: 0 A - 6 A

... Capacitor Charging power supply, with a built in configurable ACDC power supply is designed to provide the system power needs for Medical laser applications. ...

Input voltage: 180 V - 528 V
Output voltage: 600, 1,500, 2,000 V
Current: 150, 100, 50 A

... Mi-BEAM) Series is the newest addition to the AMETEK Programmable Power portfolio of high-power testing solutions. The new Mi-BEAM Series features full DC source and sink capabilities ...

Input voltage: 230, 115 V
Current: 4.4 A
Power: 1,000 W

Low Distortion 1kW Power Source with UK/Schuko/USA socket. • Provides an EN61000–3–2 compliant source • 1000W power capability at 230V • Up to 4·4A rms load current and up to 10A peak ...

Input voltage: 40 V - 160 V
Output voltage: 40 V - 160 V
Power: 10, 30, 50 W

The AMFW72-NZ series of EMC filters are designed for railway and industrial applications. They offer an input voltage range of 40-160VDC with an efficiency of 98%. The AMFW72-NZ series can aid in compliance to EN50155 for railway and ...

Ultracap is the new emergency power supply device for electronic valves, the natural completion of the EVDEvo, range both single and Twin versions, ensuring complete closing of the valves even when there ...

Input voltage: 85 V - 370 V
Output voltage: 5, 12, 24 V
Current: 0.21, 0.42, 1 A

The BAC05 series delivers an output power of 5 watts from -40°C to 55°C, operating up to 85°C with derating, from AC or DC input voltages. The BAC05 series small footprint is EMC class B compliant without ...

Input voltage: 230 V
Output voltage: 0 V - 30 V
Current: 0 A - 5 A

... highly reliable and accurate power supply is suitable for various applications such as production, labs, colleges and features an intelligent temperature controlled fan with low noise ...

Input voltage: 120, 230 V
Output voltage: 12 V
Current: 7, 14 A

... optimal power ... With SITOP smart, even loads with high power demand can be connected without difficulty, thanks to its overload capability of 150 percent “Extra Power.” The 24 V power ...

Input voltage: 400 V
Output voltage: 24 V - 1,000 V
Current: 200 A - 1,000 A

D1000 High Precision Bidirectional DC Power Supply is a high precision DC power supply adopting two-stage conversion architecture, featuring high dynamic response, and ...

Input voltage: 240, 120 V
Output voltage: 43 V - 57.5 V
Power: 1,100 W - 4,000 W

... an integral DC distribution panel with easy to fit push-in circuit breakers and low voltage disconnect contractor. All these contribute to system solutions to suit your requirements. System - System ...

Input voltage: 100 V - 270 V
Output voltage: 10 kV
Power: 60 W - 270 W

... pleased to announce a new range of rugged & ultra efficient single output LED Drivers. The range includes both AC - DC, and DC - DC models from 60 Watts up to 270 Watts, with output voltages from 18 to ...

Input voltage: 90 V - 290 V
Output voltage: -48 V
Current: 18.75 A

The Micro Power System provides advanced controller features in a compact, cost-efficient footprint. A Compact configuration provides up to 900W of 48V output power in 19-inch or 23-inch wide frames, ...

Input voltage: 90 V - 264 V
Output voltage: 8.4 V - 16.8 V
Current: 3 A

► Universal AC Input / Full Range ► Li-ion battery Charger Between 4V-18V with Single Port ► Charging Method: CC and CV ► Various Operating Status Indicator ► Double Insulation. High Insulation Voltage Ensure Safety Usage ► ...

Digital intelligent high frequency hard oxidation power supply

Input voltage: 100 V - 240 V
Output voltage: 24 V
Current: 1.25, 0.35 A

Power supply LCOS-PS controlled, 30 Watt Primary switchmode power supply, PFC, Single-phase

Input voltage: 100 V - 240 V
Output voltage: 5 V - 24 V
Current: 0.17 A - 0.8 A

General Data Input rated voltage 100 ‑ 240 Vac Output rated voltage 4.5 ‑ 30 Vdc Output rated current 0.17 ‑ 0.8 A Ambient temperature ‑25° C to +50° C Advantages stabilised output voltage Low idling losses Wide‑range input voltages Short‑and ...

Input voltage: 540 V - 650 V
Output voltage: 350 V
Current: 3.8, 7.6, 19 A

The compact inverter D, two in one Compact for small outputs. The double inverter KWD is a KW variant for two servo drives with a maximum output of 5 kVA. It combines two independent compact inverters in a compact housing with cold-plate ...