Rotational speed: 6,000, 4,000, 3,000, 2,000 rpm
All KPL planetary gearbox adopt the alloy forged steel as the raw material, the powerful heat treatment, the latest helical gear design, full needle roller bearings, and global top level gear ...
KOFON Motion Group
Rotational speed: 3,000, 4,000, 1,500, 2,000 rad.min-1
Backlash: 0.17, 0.2, 0.25 °
Gear ratio: 3 unit - 5,112 unit
All SVX planetary gearbox adopt the alloy forged steel as the raw material, the powerful heat treatment, the latest helical gear design, full needle roller bearings, and the high level gear ...
KOFON Motion Group
Rotational speed: 1,200 rpm - 6,000 rpm
Power: 200 kW - 5,000 kW
Backlash: 0.1 ° - 0.28 °
... multiple precision machined surface. The use of top-level spiral bevel gear, with optimization design, the contact tooth surface of uniform load、allowable hith torque out put. Gear is ...
KOFON Motion Group
Rotational speed: 3,500 rpm - 6,000 rpm
The low product-weight of the RPS line guarantees high power densities. Thus, the planetary gears of the RPS line are applicable for high torque requirements as for example in axis movements at dynamic operation. Up ...
Ruhrgetriebe KG
... Thus, the planetary gears of the RPS line are applicable for high torque requirements as for example in axis movements at dynamic operation. Up to three planetary stages allow for a large selection of transmissions. Gear ...
Ruhrgetriebe KG
Rotational speed: 4,000 rpm - 8,000 rpm
Gear ratio: 5 unit - 100 unit
Planetary Gear RPL050 The very robust design of the RPL line allows for high torsional rigidity. The planetary gears are ideally applicable even at high radial or axial load. hanks to the ratio ...
Ruhrgetriebe KG
Rotational speed: 2,100 rpm - 7,000 rpm
Backlash: 0.02, 0.03, 0.05 °
Gear ratio: 5.5 unit - 220 unit
High Torque Optimized Output Torque & Inertia Moment High Precision Long Service Life Low Noise Limited Temperature Rise Support Flange/Curvic Interface Suitable for Rack & Pinion Applications
Apex Dynamics
Rotational speed: 15 rpm - 600 rpm
Gear ratio: 5 unit - 80 unit
... series of worm gearbox enjoys 25% OFF to celebrate our 30th anniversary, is with low backlash high precision 0.5-2 Arc minutes and designed for servo motors covering the whole industry, and suitable ...
Chenyue (Jiangsu) Technology Co., Ltd.
Power: 0.37 kW - 3 kW
Gear ratio: 5 unit - 100 unit
CYRW worm gearbox enjoys 15% OFF to celebrate our 30th anniversary, represents the most advanced solution to market requirements in terms of efficiency and flexibility. ABB, SIEMES and other high-end motors can be configured Key ...
Chenyue (Jiangsu) Technology Co., Ltd.
Gear ratio: 5 unit - 80 unit
... of worm gearbox enjoys 25% OFF to celebrate our 30th anniversary, is with low and adjustable backlash and high precision 0.5-2 Arc minutes and designed for servo motors , cover the whole industry, and ...
Chenyue (Jiangsu) Technology Co., Ltd.
Rotational speed: 3,000 rpm
Power: 450 W
Backlash: 0.05 rad - 0.15 rad
... flange,easy motor mounting The highest dynamics in multiple axis systems For any mounting position High precise helical gear Low backlash & noise Frame Size - 60mm, 75mm, 100mm, 140mm, 180mm Output Torque - 42Nm-1568Nm Ratio ...
Newstart Planetary Gear Boxes Co.,Ltd.
Rotational speed: 3,000 rpm - 6,000 rpm
Backlash: 0.11 °
Gear ratio: 3 unit - 320 unit
AF series built with precision helical gears. The gears shape optimized by 3D Simulation technology. Single piece structured ring gear to minimize the assembling error ...
Newstart Planetary Gear Boxes Co.,Ltd.
NSQ AGV/AMR Wheel Driving Gearbox Over all: With an extensive history of collaboration with multiple AGV (Automated Guided Vehicle) manufacturers, we pride ourselves on delivering high-quality custom gearboxes ...
Newstart Planetary Gear Boxes Co.,Ltd.
What AKIM Straightening & Swivel Gears especially characterized. • Construction according to customer specifications • Multi-stage construction • Low or adjustable backlash available • Nominal torque up to 60‘000 ...
Rotational speed: 5,000 rpm
Backlash: 0.17, 0.2 °
Gear ratio: 3 unit - 100 unit
Teh DH060 is a planetary gear reducer by PHT Vertex Precision. The unit is equipped with an optimum torque and rigidity, allowing the use of straight gear rather than ...
PHT Vertex Precision Components Corporation
Rotational speed: 4,000 rpm
Backlash: 0.17, 0.2 °
Gear ratio: 3 unit - 100 unit
... planetary gearbox has been developed specifically for all application, which is an ideal alternative to our precision series. There’re ten ( 10 ) different sizes available, from 1.7” to 8.66” ( 42 mm ...
PHT Vertex Precision Components Corporation
Rotational speed: 4,000 rpm
Backlash: 0.17, 0.2 °
Gear ratio: 3 unit - 100 unit
PHT Vertex Precision’s planetary gear reducers offer high torque and rigidity, employing a straight gear in place of a helical gear for more efficient ...
PHT Vertex Precision Components Corporation
... -V / H-EThe PSC-V / H-E sub-assemblies are particularly low-backlash gearboxes and are mainly used in the field of robotics. More about our sub-assembliesYour advantage:The gearboxes can be mounted directly ...
Melior Motion GmbH
Onvio's Dojen™ cycloidal speed reducer has been providing engineers with the highest precision servo reducer available on the market for more than 25 years. It offers TRUE Zero backlash ...
... efficent drive Removable inspection cover Allows periodic inspection of gearing during routine maintenance Gears Hardened and ground gears Alloy housing Is vacuum impregnated (MIL-STD 276) ...
HYDROMEC
Rotational speed: 2,000 rpm - 10,000 rpm
Backlash: 0.02 ° - 0.12 °
... Single-piece design for ring gear & housing Single-piece design for sun gear & input shaft ensuring high concentricity Full complement solid uncaged needle roller bearings for planet gears All ...
GEARKO
Power: 0 kW - 22 kW
... extreme torsional resistance and noise absorption. Forces are distributed through hardened helical gears produced from high quality steel with precision ground tooth profiles. These structural characteristics ...
Rehfuss Drive Solutions GmbH
Rotational speed: 100, 1,500, 3,000, 500, 1,000 rpm
... ensure a long working life and resistance to contamination of the gearbox. The properties of KSZ-H series include high precision, power density and smooth run as well as high-quality two-component varnish offering ...
Rotational speed: 400 rpm
Power: 0 kW - 600 kW
... Series is specially designed for applications and sectors that request high torque within restricted area. The design of our IPR gear units not only provide high performance ratings into compact dimensions, but the large ...
I-MAK Réducteurs
Power: 0.2 kW - 220 kW
Gear ratio: 5 unit - 25 unit
... Helical Shaft-Mounted Speed Reducer (HSM) Helical Shaft-Mounted Speed Reducer (HSM) features patented keyless, steel Taper-Grip bushing for easy mounting and as well as traditional keyed hub option Helical ...
SUMITOMO Drive Technologies America
Rotational speed: 1,500 rpm
Power: 30, 37, 55, 90 kW
... Screw Drives offers dual-shaft counter rotating extruder gear units. The gearboxes of this series have been developed by featuring high torque and high speed output rate. The series of gearboxes ...
BENZLERS
Power: 0.2 kW - 220 kW
Gear ratio: 5 unit - 25 unit
Helical Shaft-Mounted Speed Reducer (HSM) is one of the most popular products in our portfolio. Overview Sumitomo Helical Shaft Mount (HSM) Keyless Taper-Grip Bushing 25-Degrees Pressure-Angled Gears Integrated ...
SUMITOMO (SHI) Cyclo Drive Germany GmbH
Power: 0.12 kW - 55 kW
Gear ratio: 3 unit - 4,300 unit
The slim shaft-mounted helical gearboxes are characterized by high permissible radial forces, closely stepped ratios and low backlash. - Slim design saves installation space of the machine - Shaft dimensions in line ...
Lenze SE
... in conditions where the highest quality of control is an absolute prerequisite. Key features: -Unsurpassed level of precision: Max. 0.2° tolerance -Continuous duty: Meets Class D requirements of EN 15714-2
Rotational speed: 0 rad.min-1 - 4,500 rad.min-1
Backlash: 0.16, 0.11, 0.07 °
Gear ratio: 1 unit - 6 unit
... arc teeth according to Klingelnberg. For customers, this means greater toothing quality and precision as well as even faster delivery times. L Angular gearbox with solid shaft with key
VOGEL
Rotational speed: 100 rpm
Gear ratio: 65 unit
Low-backlash gear Ket-Motion 2020 DS with turntable A low-backlash, maintenance-free worm gear unit for demanding applications in positioning or for high-precision measuring tasks. ...
Rotational speed: 2,800 rpm - 8,500 rpm
Gear ratio: 50 unit - 160 unit
The CSG Series Gear Component Sets are available in ten sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 23 to 3419 Nm and a power density of up to 545 Nm/kg. Maximum ...
Harmonic Drive SE
... combinations and mechanical gear ratios. Characterized by high efficiency and high torque in compact size, offer a very compact design and low moments of inertia, thanks to a balanced distribution and optimized of load ...
High Precision Planetary Gearboxes Unlimited flexibility Due to their outstanding properties, planetary gearboxes are used in all kind of industrial applications. Güdel high precision planetary gearboxes ...
Please specify:
Help us improve:
remaining