Pressure-reducing valves

DN: 0.125 in - 0.5 in
Pressure: 21 bar

26A: Small Pressure Regulators, 2-Way Description: Series 26A Small Pressure Regulators are used in small general purpose applications to regulate pressure in piping systems using ...

DN: 5 mm - 22 mm
Pressure: 200 bar - 400 bar
Temperature: -60 °C - 200 °C

... available with NPT thread - on request. Temperature range: -60 ° C to 200 ° C. At elevated temperatures, please consult the pressure reduction table on page 8.

Complete with pressure gauge. Adjustable 0 - 10 bar. Metal design with fixing bracket.

... brake valves (EBV) and accessories, each optimized for specific full-power braking applications, including retarding, hill holding, ABS, traction control and stability control. MICO Electrohydraulic Brake Valves ...

DN: 10 mm - 100 mm
Pressure: 25 bar
Temperature: -10 °C - 80 °C

for water distribution domestic and individual 10 BIS : With 1/4'' plugs on both sides to allow pressure gauge connection Possibility of assembly of compensating spring (except for 4'' size) to obtain settings at ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 80 °C

Body material Brass Bonnet material Brass PN (End) PN16 End Flanged Contact sealing Stainless steel

DN: 0.25 in
Pressure: 1,000 psi - 5,000 psi
Flow rate: 5 us gal/min

Valves are adjustable: 1,000 to 5,000 psi Features Pressure reducing valves are designed to reduce the maximum pressure in a portion of a hydraulic ...

DN: 1 in - 10 in

Both steam pressure reduction and temperature reduction (Desuperheating) are done in a single valve making it an extremely efficient, cost effective and compact solution. Features - ...

DN: 0.5 in - 2 in
Pressure: 0.5 bar - 40 bar
Temperature: -10 °C - 95 °C

... commercial and industrial plants against too high supply pressure. Pressure reducers are used, if within a piping system despite of varying pressures on the inlet side a certain ...

Pressure: 60 bar - 280 bar
Flow rate: 40 l/min

... installation - Properties - Reduces system pressure - Technical information - Minimum purity of the medium: ISO 4406 19/17/14 (NAS 8) A and B versions with check valve - Height - ...

Pressure: 50 bar - 300 bar
Temperature: -20 °C - 70 °C
Flow rate: 65 l/min

... Inverse-proportional pressure-relief valves consist of a spool-type main stage and a leak-free, poppet-type pilot stage with a falling pressure/current characteristic. Thanks to the damping ...

Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C

PRESSURE REDUCE VALVES Size:1/2"-3/4" [Technical Specification] Material Normal brass ; CW617N ;DZR Working Pressure PN25 or 2.5Mpa Seal Rubber Application ...

DN: 2 in - 10 in
Pressure: 250, 500, 150 psi
Temperature: -30 °F - 200 °F

TECVAL model VRLP Pressure Reducing Valve, reduces upstream pressure to a predetermined pressure set downstream in spite of changes in flow or upstream ...

DN: 40 mm - 250 mm
Pressure: 17.2 bar

... pressurization of the valve’s control chamber, by line pressure or other independent water source, prevents surges * A pressure reducing pilot enables a full control ...

DN: 40 mm - 900 mm

PRESSURE REDUCING VALVE- Same construction as Model C000/CF000. Reduces high upstream pressure to lower downstream pressure. CONSULT FACTORY for control ...

Pressure: 30 bar - 240 bar

Kurt PRV-M-02-4 valves are used for controlling system pressure for all subsequent valves based on adjusted pressure. They provide precise control of hydraulic pressure. ...

DN: 65 mm - 200 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C

... performance butterfly valve for closing or flow regulating applications. Greater flow rates and reduced pressure drop across the valve, along with fine control, integral seal and ease ...

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 80 °C

... accurate as that of ZZY self-operated type Large pressure reducing ratio, for example the differential pressure ratio reaches 1600 (0.8MPa before the valve and 50mmH20 ...

Pressure: 0 bar - 16 bar
Flow rate: 40 l/h - 200 l/h

... chlorine pressure reducing valve is used to sink down the unregulated gas pressure to a steady operating gas pressure. The pressure ...

... hydraulic or pneumatic pressure. The valve will be operated by a pressure reducing pilot valve to achieve constant outlet pressure, ...

DN: 1.5 in - 4 in
Pressure: 0.5 bar - 10 bar

... •Control of main valve: by built-in solenoid pilot valve •Applications : For water distribution, where downstream pressure should be reduced, the valve is commanded ...

DN: 25 mm - 300 mm
Pressure: 69 bar
Temperature: 540 °C

The SMS-7100 direct spring operated pressure relief valves has been designed to protect against excess pressure steam boilers and to provide superior performance. These valves ...

DN: 15 mm - 80 mm
Pressure: 0.4 bar - 14.4 bar

Valves for use in pharmaceutical or food industries; operated by piston or by diaphragm, different connections possible, for example with clamp connection DIN32676, male union DIN 11851, aseptic connections DIN11864

DN: 0.5 in - 4 in
Pressure: 16, 25, 40 bar

... EN 10088-1 GASKETS NBR EN 681-1 CERTIFIATES D.M. NR.174 – HEALTH DEPARTMENT (I) TESTING EN 12266-1 (ISO 5208) PRESSURE TESTS

DN: 15, 25, 20, 32 mm
Pressure: 30 bar
Temperature: -10 °C - 70 °C

Pressure reducing and regulating valve with balanced seat, outlet setting from 1,5 to 6 bar, with upstream 500 micron flow filtering system, connections with ring nut and union.