Production presses

Force: 1,000, 3,000, 2,000 kN
Rate (strokes/min): 150 p/min - 400 p/min
Stroke: 1,200, 1,300, 1,500 mm

... - this means that the trimming press in the cell is becoming increasingly important. While in the past the die casting process was the determining factor for the possible cycle time, it is currently ...

Two floors press with 4 or more cylinders, short stroke and movement (single or double). This press has been specifically studied for the production of low profile and high quality composite ...

Force: 98.1 kN - 6,178.2 kN

HIDRALMAC is successfully producing c-frame presses since more than 22 years. Some of our customers have more than 200 HIDRALMAC presses of that type in use. C-presses can be manufactured depending on customers’ requests. Tailor-made ...

Force: 5 tf
Opening: 6 in - 14 in

... force-multiplying principle with a precision framework to deliver extraordinary thrust forces, power factor and accuracy for both production and laboratory uses. Each unit comes with a Multi-Power cylinder that uses multiple ...

Force: 80 tf
Opening: 500 mm
Stroke: 250 mm

Power (tons) - 80 Stroke (mm) - 250 Lower plate (mm) - 700x500 Throat depth (mm) - 300 Vertical opening useable (mm) - 500 Engine power (HP) - 5,5 Approximation speed (mm/s) - 25 Working speed (mm/s) - 6 Max. pressure (Bar) - 315

Force: 10,000 kN

ODEN-Flexible, a hydraulic press available in many different configurations allowing for a wide ODEN-F is a flexible hydraulic four-column press that is available in many different configurations. This ...

Force: 0 kN - 30,000 kN
Stroke: 2,000 mm
Table length: 3,000 mm

... repeated production processes and a long life of our equipment. HIGH PRODUCTIVITY OMERA technology applied to hydraulic presses aims to maximise the system output and allows unconventional machining, with a conséquent ...

Working speed: 2,500 mm/s

... board pressin Customer benefits Long de-aeration zone and high-pressure compacting area in order to achieve thin mat at press infeed No plugging of degassing (precompressor) belt Low maintenance due to exhaust and ...

If you need a single press with up to 13 axes or a complete calibration centre which is fully automated for part production and adapter changeover, LAUFFER can offer your the most optimal solution for your needs.

Force: 2,000, 1,100, 1,600 tf

• High-rigidity steel-welded frame • High-sensitive hydraulic overload protection • Automatic oil cycle lubrication system • Optional components: output shaft, air cushion, slider knockout, automatic feeder and other devices

Force: 50, 80, 100, 150 tf
Opening: 250 mm
Stroke: 250 mm

... hydraulic presses now feature a wide range of uses including the possibility of incorporating these machines in automatic production lines. This series works with hydraulic pressure lower than 320 BAR to ensure the ...

Force: 7.5 kN
Opening: 40 mm

... accurate setting of press heads. The L-VK 750-40 Systems can be equipped with a wide range of optional components. This includes Precigonram adjustment functions (DP), return travel locks (HS) for guaranteeing high-quality ...

Force: 1,800 daN
Opening: 200 mm

... accommodate two different tools in order to carry out several operations on a product or several different products. 1 – 4 COLUMN PRESS •Stiff tack welded chassis, with RAL 7035 textured paint •Pressure: max 1 800 ...

Force: 12,500 kN
Opening: 500 mm - 1,000 mm

... presses of the RPH series are fully-fledged alternatives to conventional presses and forging hammers and are suitable for the production of ring blanks, free-form forgings and drop forgings. We supply the presses of the ...

Force: 0 kN - 30,000 kN

In a mechanical eccentric press the ram is driven by gears that generate a sinusoidal curve, whose approaching curve to the BDC and return stroke are symmetrical. The stroke of ram in a mechanical eccentric press ...

Force: 29,420 kN
Working speed: 10 mm/s

... D.48" (3830 mm. WIDTH PLATE) AND THICKNESS UP TO 60 mm. THIS ALLOWS YOU TO FOLD THE PRINCIPLE OF WORKING HALF THE TIME - PRESS "COLUMNS 4" - POWER 3000 ton. (N° 2 CYLINDERS 1500 ton. / CAD) - LIGHT BETWEEN THE COLUMNS ...

Force: 100 kN
Opening: 50 mm - 1,000 mm
Stroke: 1 mm - 20 mm

Force: 2,500 tf

... this Kenya customer purchase primapress press brake and shearing machine and some power press machine , and using very good. So they buy this big hydraulic door embossing machine door skin press ...

Weight: 3,600 kg
Overall width: 1,560 mm
Overall height: 1,980 mm

The all-rounder with a dual shaft design. For slices, blocks, pellets and nuggets. Ideally suited to large production runs and the highest levels of flexibility. Dry ice consists of solid carbon dioxide and is produced ...

Force: 1,250 kN - 5,000 kN
Rate (strokes/min): 20 p/min - 150 p/min
Stroke: 14 mm - 300 mm

... wear which consequently results in a superior quality of process and parts. Moreover, the ram is fully guided for the entire stroke, so for the entire forming / stamping process. The production range ...

... is a perfect complement to a travelling machine. Suitable for production with complex and detailed welding Small, delicate electrodes are available Socket for external eyelet press (optional)

Rate (strokes/min): 120 p/min

... servo press, the scrap collection system and the stacking unit. The MONO 500 comes at an operating cycle equal to 120 strokes per minute and allows the production of aluminium trays with cut imprinting ...

Force: 110 tf - 250 tf
Stroke: 110 mm - 280 mm
Hydraulic pump power: 11 kW - 30 kW

... overload protection device, to guarantee the precision and safety of press slider revolving and stopping. ▶ Reasonable physical design is convenient to realize automatic production, reduce cost and ...

Force: 198.9 tf
Opening: 10 mm - 500 mm
Table width: 650 mm

... with integrated water cooling circuit Water / Air chiller Oil-free cooling DESCRIPTION • Typically used for production where compacity and short cycle time is needed • Monoblock upper steel bolster construction • ...