Proportional valves

DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C

... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_valve_body: ...

Pressure: 5,000 psi
Flow rate: 50 us gal/min

The Cross series FD hydraulic proportional flow divider is a biased pressure compensated flow regulator, specifically designed for use as a hydrostatic transmission anti-spinout valve. Various orifice ...

... system, these valves provide hydraulic power for normal and emergency power-off braking for electrohydraulic brake systems, anti-lock brake systems and traction control systems. Electrohydraulic Brake Valve ...

DN: 0.5 in - 12 in
Pressure: 175 psi
Temperature: 121 °C

The Bell & Gossett Circuit Setter Plus is a calibrated balance valve designed for pre-set proportional system balance. Since its introduction to the HVAC industry in 1968, the Bell & Gossett Circuit Setter ...

DN: 1.5, 0.75, 0.5, 1 in
Temperature: 10 °C - 70 °C
Flow rate: 10 l/min - 250 l/min

40Ω Series Proportional Electro-Hydraulic Flow Control (and Check) Valves – The preselected flow varies in proportion to the current input, the selected flow is not affected by pressure or flow. For other ...

DN: 40 mm - 100 mm
Pressure: 0.5 bar - 10 bar

... Model IR-120-PD-Z Proportional Pressure Reducing Valve is a double chambered, hydraulically operated, diaphragm actuated, Pilot-Less control valve that reduces higher upstream pressure ...

DN: 0.5 in - 1.25 in
Pressure: 2.1 MPa
Temperature: 2 °C - 94 °C

... input control signal, and provide proportional control, and 0~10Vdc (1mA) feedback signal. * The valve actuator and valve body is used tight lock connection. The actuator can be installed ...

DN: 160, 120 mm
Pressure: 15 bar
Temperature: -20 °C - 120 °C

... cavitation noise generated by the main engine; 4. The intake valve integrates a relief valve, a makeup valve, and an inverse proportional valve, with ...

DN: 15 mm - 250 mm
Pressure: 10 bar - 16 bar
Temperature: -30 °C - 150 °C

Valves for applications with strict sealing requirements, especially suitable for strong corrosive media. Features Valve body made of F46 or PFA lined cast steel available Rotation between the ...

Flow rate: 2 l/h - 15 l/h

... Capacity from 12 gCl2/h to 15 kg Cl2/h 4 –20 mA proportional control input V-notch precision rate valve Modbus Communication High quality stepper motor 5-POINT valve calibration Led ...

DN: 0.5 in - 6 in
Pressure: 150, 250 psi
Temperature: 70 °F

Hayward's CV Series Profile2™ True Union Ball Valves can be availed in PVC and CPVC with either FPM or EPDM o-rings. The proportional control offers two linear flow curves for quick opening and for slow ...

DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h

Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation ...

DN: 0.125, 0.375, 0.5 in
Pressure: -1 bar - 20 bar
Temperature: -20 °C - 84 °C

... differential pressure, the High Resolution Valve provides superior performance over legacy needle valves. The high resolution electronic flow control valve The High Resolution Electronic ...

DN: 0.75 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 145 °C

proportional motorised valve 3/4" inch made of stainless steel to control the flow in the system up to 6000 l/h with an setpoint of 0 - 10 volt FKM/FPM seal: - FKM/FPM setpoint: - 0 - 10 volt voltage: ...

... opening is proportional to the flap travel. Due to the relatively short opening or closing stroke of the valve stem of this type of valve, and the very reliable cutting function, and ...

DN: 2.4 mm
Pressure: 8 bar
Temperature: -10 °C - 90 °C

... 0.4 / 4.4 mA), the piloting current is completely switched off, causing the valve to be de-energised (tightly closed function). We recommend combining these proportional valves with ...

DN: 50 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -40 °C - 250 °C

... lined gate valves; It has been developed for on / off or proportional flow control under process conditions that limit the operating conditions of normal valves such as abrasive, corrosive ...

DN: 0.25, 0.125 in
Pressure: 1,000,000 Pa
Temperature: 0 °C - 120 °C

... offers simple-type, precision-type and various other needle valves, and also manufactures flow controllers having a combination of a needle valve and diaphragm as well as proportional ...

This cost-effective proportional valve is used to control the flow rate of water in a beverage machine.

DN: 25 mm - 65 mm

... Concentrate Ball Valves come in standard sizes ranging from 1.0 to 2.5 in (DN25-DN65) to match the concentrate inlet thread (or flange) size on Winan proportioners and Inline Balanced Pressure Proportioner(ILBP) assemblies. ...

DN: 0.25, 0.5 in
Pressure: 150 bar
Temperature: -75 °C - 190 °C

The M Valve is a miniature air operated proportional control valve for use on liquids or gases. Available for 1/4and 1/2line sizes, a wide range of inner valve trims ...

... hydraulic systems will feature a new Proportional Directional Valve System. This system will replace the original CMX valve system on the T450, T455, T685, TXD, and T130 series of drilling ...

DN: 0.25 in - 0.375 in
Pressure: 210 bar
Temperature: -30 °C - 120 °C

Proportional Valves Smooth, accurate control is a must for most pressure and flow applications, so Eaton developed an entire range of Screw-in Cartridge Proportional Valves ...

ARAG® Manual Proportional Spray Control Valves Adjusts flow proportionally to control spray pressure. Key Features 473 Series outlet size: 1 1/4" HB

Pressure: 0 bar - 10 bar
Temperature: 0 °C - 50 °C
Flow rate: 290 l/min - 4,800 l/min

Pneumatic proportional control valves - Series EPR Proportional valves, series EPR, are used in the field of pneumatics (compressed air) and allow the adjustment of ...