Protection level level switches

Process temperature: -40 °C - 260 °C
Process pressure: -0.1 MPa - 6 MPa

DHE-FT Vibrating Level Switch is a control switch for level measurement developed and produced by DHE. This instrument combines the unique “ELL Signal Analysis Technology” ...

Process temperature: -200 °C - 400 °C
Process pressure: 0 psi - 1,000 psi

... Float-type Level Switches is an excellent and economical solution for controlling height of liquids in tanks and reservoirs. The instrument can be supplied with up to four floats and switches to control ...

1.Overview The side-mounted float level switch uses the principle of liquid buoyancy. When the float moves up and down due to buoyancy, the reed switch in the junction box is affected ...

Process temperature: -30 °C - 350 °C
Process pressure: 80 bar

... magnetic float level sensors are suitable for monitoring the level of practically all liquids, e.g. as a full or empty tank sensor, for controlling valves and pumps and for alarm function. The potential ...

Process temperature: -40 °C - 80 °C

Magnetic float-level switch principle is the float which link to rod equipped with a constant magnetic field, because of the liquid level rise or fall, make the float internal generated ...

Process temperature: -40 °C - 150 °C
Process pressure: 100 bar

... designed for marine and on-land applications for liquid détection, pump control, water ingress alarm Systems, overfilling protection on liquids with or without foam. ASL Works on Valcom® proprietary principle of distributed ...

Process pressure: 60 bar

CS1000 series capacitive liquid level gauge is based on the principle of capacitance measurement of liquid level sensor, probe as a plate of capacitance, as another plate, metal container wall filled ...

Process temperature: 40 °C - 150 °C
Process pressure: 5 bar - 10 bar

... operated Top Mounted Level Switch for controlling one or multi Levels by using reed Switch .The Unit Consists of Vertical Guide Pipe (Stem ) , Reed Switches Are located ...

1、Description LS level switch is consisting of a magnetic float, unit stem with magnetic reed switch, the magnetic float moves with liquid level to ...

The level monitor Mycrocont MCN is used for easy and reliable level monitoring of liquids or solids. In addition to aqueous media, also e.g. oils, honey, chocolate, Emulsions and various fine-grained ...

Process temperature: 0 °C - 50 °C
Process pressure: 1 bar

Process temperature: 85, 60, 70 °C
Process pressure: 2, 1 bar

These float switches have a mercury-free switching system consisting of a microswitch and a ball which actuates this switch. Technical Data Conductor cross-section 3x 0,75 mm², Polyurethan 3x 0,5 ...

Process temperature: -5 °F - 150 °F

... secured micro switch. When the level switch changes position in the liquid, the hermetic micro switch is activated by a moving weight. Electrodes give an alarm or a ...

Process temperature: -20 °C - 70 °C

... design with integrated relay for conductive media 2 or 3 electrode rods made of 1.4571 stainless steel for 1 or 2 filling levels simple installation by G 1˝ housing thread or DN 25 tube clamp operation voltage 24 ...

Process temperature: -40 °C - 250 °C
Process pressure: -0.1 MPa - 4 MPa

... in the industrial frequency band range. The beam energy is low, can be installed on all kinds of metal, non-metallic container or pipe, no harm to human body and environment Operation principle Radar level ...

Process temperature: 55, 75 °C
Process pressure: 200,000 Pa

The KARI float switch is a control device for magnetic valves or an alarm device that alerts the user at specified surface levels. Thanks to its large float casing (Ø 170 mm), the KARI float switch ...

• DPDT output • Magnetically driving by mechanical cam • Silver chromium alloy contact • Aluminum housing • Explosion-proof : Ex d IIC T4

Process temperature: -40 °C - 140 °C

The ultrasonic level switch is designed to detect with speed and precision whether or not a pipe is filled with liquid or liquefied gas. As soon as the pipe’s detection point is filled, the sensor ensures ...

Process temperature: -40 °F - 140 °F
Process pressure: 50 psi

... same N. C. (normally closed) tank dry condition in either side unit is installed. Switch logic N.C. (normally closed) tank dry. Switch opens on increasing level.

Process temperature: -30 °C - 80 °C

The flexible float switch (EX-FLEX) is suitable for installation in tanks with limited space at the top and potentially explosive media inside. This switch can be installed horizontally over the tank. ...

Process temperature: -29 °C - 80 °C
Process pressure: 10 bar

A rapid fluid level switch suitable for use with contaminated fluid. Rod height can be easily cut to length for fast implementation into your system. Features Rapid level float switch User ...

Process temperature: -40 °C - 135 °C
Process pressure: 4,000,000 Pa

The UQK(S)-100 float level controller is connected to the storage tank or container through threads or flanges. When the liquid level changes, the float move with it, so that the magnetic steel at the ...

... Rotalog Paddle Switch is second to none. Thousands are in operation giving this unit a reputation for being reliable, durable and effective. Three main models are available, in a range of voltage and paddle options ...

Process temperature: -40 °C - 85 °C

The level sensor LS20 is developed for liquid level measurement/switching using a float magnet. The level switch LS0 can be used for any tank process connection type ...

Process temperature: -20 °C - 100 °C
Process pressure: 10 bar

Features level-limit switch for aqueous and oily substances turn-on and shut-off thresholds selectable via software (not necessary to have 2 devices) standard: aqueous substances weld-in sleeve system ...