- Hydraulics - Pneumatics >
- Valve >
- PTFE valve
PTFE valves
DN: 40 mm - 800 mm
Pressure: 10 bar - 16 bar
Temperature: -20 °C - 150 °C
... surface of valve seat and valve plate, providing superior valve sealing performance PTFE lined valve body inner cavity and valve ...
Hollysys
Flow rate: 2 l/h - 15 l/h
... digital output. The non-linearity of the valve can be repaired by software in five points. Built-in security feature: In case of power loss the valve has a battery backup that closes or opens the ...
DN: 40 mm - 500 mm
Pressure: 10 bar - 25 bar
Temperature: -50 °C - 200 °C
... Design options: – drain plug – by-pass – PTFE gland packing and the packing in a separation plane – PTFE packing in the seat – gland packing with leakage suction Medium - water, steam, gas, ...
ARAKO spol. s r.o
DN: 50 mm - 1,500 mm
Temperature: -196 °C - 593 °C
Non-rising Flat Gate Valve Product type On/off Valve Valve Type Non-Rising Stem Flat gate valve Model Z47H(F) Size NPS 2~NPS 60/DN50~DN1500 Design ...
... machined, and a flat valve face on the upstream and downstream sides of the valve, valves have threaded inserts at both sides of the valve body. This allows them to be ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: -29 °C - 180 °C
PFA LINED, FULL BORE, DIN BALL VALVE – KTN 123T The KTN 123T is our PFA lined DIN flanged full port ball valve. The range is from DN15 to DN150. Suitable for handling large quantities of highly corrosive ...
KTN
DN: 8 mm - 100 mm
Pressure: 25 bar - 140 bar
Temperature: -29 °C - 175 °C
VALPRES DOUBLE ACTING 2 WAY STAINLESS STEEL BALL VALVE 2-pcs threaded type ball valve : - Threaded NPT - PN 140 - Body, ball and shaft AISI 316 - PTFE seats - FKM seal - Full ...
DN: 0.5 in - 1 in
Our iPolymer PTFE Pneumatic Valve (TP Valve) features an all PTFE wetted surface design. The design is ideally suited for harsh chemical and corrosive media and environments. ...
International Polymer Solutions Inc.
DN: 3 in - 24 in
... AIS-compliant knife gate valve is now available from DeZURIK. The AIS-compliant knife gate valve is based on DeZURIK’s successful KGC-BD design which is a cast stainless steel, resilient seated and bi-directional ...
DN: 0.25 in - 0.5 in
Pressure: 10.3 bar
Temperature: 165 °C
... available for reliable and trouble-free operation under demanding COP (Clean out of Place) requirements. The standard two-piece PTFE diaphragm design prevents the separation of the diaphragm typical of conventional laminated ...
DN: 150 mm - 400 mm
Pressure: 50, 25 bar
INTER-TECH valve is equipped with métal to métal sealing, for severe applications where a plastomer seat is not viable. TECHNOLOGY Plate standardisée) in accordance with EN-ISO 5211 Adjustable stuffing box Graphite ...
DN: 15 mm - 100 mm
Temperature: -40 °C - 120 °C
... bottom stand with an insert hole, DIAPHRAGM VALVE TYPE 14 helps support the piping. The valve is also provided with a flange stand to increase installation safety. Built-in Travel Stop(15-50mm) DIAPHRAGM ...
DN: 1 in - 6 in
Pressure: 10, 19 psi
Temperature: 100 °C
... are PFA with PTFE seals, ensuring long life in even the most highly corrosive processes. Whilst the size range if limited up to 6″NB only to suit ASME 150, the AKH2A has been widely adopted by our clients who can see ...
DN: 15 mm - 32 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C
compact piston drive medium pressure of up to 10 bar with EPDM and medium pressure of up to 6 bar with PTFE (EPDM) visual position indicator NC, NO, DA NAMUR-compliant air connections resistant to contaminated medium market ...
DN: 10 mm
Pressure: 1 bar
Front control valve, inlet and outlet copper tube 10x1mm, for vacuum Needle headwork with fine regulation TECHNICAL FEATURES Media: Vacuum Minimum pressure: down to 1 mbar Fluid identification: EN 13792 Design: ...
Carlos Arboles S.A.
DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 50 °C - 90 °C
thermostatic balancing valve for hydraulic balancing of riser and distribution pipes for hydraulic balancing of hot water return systems (PWH-C), supports thermal disinfection wetted metal parts made from ...
Kemper Olpe GmbH
DN: 0.25, 0.375, 0.5, 0.75, 1 in
Pressure: 0 bar - 400 bar
Temperature: 0 °C - 240 °C
Indumart Needle Valves are high pressure isolation valves suitable for shutting-off the impulse line and for mounting to pressure instruments. They are mostly used in oil, gas, Chemical, petrochemical, ...
DN: 1, 0.75, 0.5, 0.25, 0.375 in
Temperature: 0 °C - 100 °C
BUENO's PTFE Needle valve is Designed with simplicity and easy of installation. Excellent chemical resistance Ideal for use with instrumentation fitting as a sample valve ...
Ball Valves Ball Valves with unresticted flow Ball valves or nickel-lated brass with a chomium-plated ball. Seals fo Teflon (PTFE and NBR). Metal lever (alu alloy). ...
DN: 25 mm - 150 mm
Pressure: max 10.0 bar
ESL seat valve For sensitive beverages without preservatives and beverages distributed outside of the cold chain Cost-attractive design, suitable for ESL applications Rotational decoupling on linkage between ...
Evoguard GmbH
DN: 0.25 in - 1.25 in
Temperature: -10 °C - 100 °C
Excluded from 97/23/EC directive (article 3 § 3) -POM/PTFE ball seats; NBR other seats - Reduced bore- The shown images can differ from the actual product. Technical data & prices are subjected to be changed without prior notice.
MerxTrade BV
DN: 25 mm - 300 mm
Pressure: 2.5 bar - 8 bar
Temperature: -30 °C - 250 °C
2PC Flange Stainless Steel API Ball Valve with ISO5211 Mounting Pad Product Feature: 1. Floating ball, full bore or reduce bore. 2. ISO5211 mounting pad for easy automation. 3. Blow-out proof stem design. 4. PTFE/RPTFE ...
DN: 10 mm - 65 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
Farbo presents a new pneumatic globe valves series. The body in stainless steel makes new valves suitable for all applications which require aggressive fluids and performances up to 200° C and 16 bar ...
Suitable for use in industrial chemical complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Bolted flange as body-cover for ball Flanges drilled acc.to UNI or DIN Possibility of equipment ...
THERMOMESS S.r.l.
DN: 2 in - 60 in
Pressure: 16 bar - 100 bar
Soft sealing:PTFE,EPDM,NBR Features: The sealing form mostly adopts the sealing structure, and the sealing material is rubber, Teflon and so on. Due to structural limitations, it is not suitable for such industries ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining