Pumps

Flow: 20 l/min - 60 l/min
Head: 10 m - 20 m
Power: 0.37, 0.55 kW

AC Fuel Ex-Proof Transfer Pump for Gasoline Refueling (YB-60FB) Product introduction: This explosion-proof fuel transfer pump is suitable for use with Gasoline,Diesel,Kerosene and Methanol. It is ...

Flow: 0.1 us gal/min - 1,440 us gal/min
Pressure: 0 psi - 500 psi

... experienced with positive displacement pumps. The Axiflow Solution far exceeds current industry standards and expectations. Axiflow/Jung maintains 3A and EHEDG certifications for all pumps in our offering.Axiflow ...

Flow: 2 m³/s - 20 m³/s
Pressure: 10, 25, 16 bar
Head: 14 m - 50 m

... VFD constant Pressure Pumps are designed to start and stop over and over again without causing damage to pump's motor. It allows the motor to gradually ramp up to meet the actual flow and pressure demand ...

Flow: 3.2 l/min

The compact 2-channel pump BiVOC2V2 allows you to perform simultaneous dual air-samplings in the low volume flow range starting at 0.1 l/min. Perfectly suited for air-samplings on TENAX sample-media ...

Flow: 36, 19 m³/h
Pressure: 0 bar
Head: 14, 12 m

... the environment. • The MTX Industrie pump uses a DC brushless motor for high efficiency and reliability, it is connected to a solar generator via a controller. The controller monitors the system, controls the pump ...

Flow: 20, 30 m³/h

DESCRIPTION Powered by LUTIAN OHV, extraordinary performance and smooth operation; The pump is die-casted by ADC12 aluminum alloy; High quality ceramics, mechanical seal of silicon carbide; Convenient operation and ...

Flow: 0 l/min - 246 l/min
Pressure: 20 bar
Head: 50 m

Standard Bushings-Carbon Graphite Optional Bushings-Alpha Silicon Carbide (Tungsten carbide coated shaft reguired) Optional Tungsten carbide coated shaft Standard NEMA 56C motors Magnet Material-Samarium Cobalt Applications Industry-Chemical ...

PressureJet pumps are triplex (three plungers), positive displacement, industrial high pressure triplex plunger pumps. We offer both the triplex piston and triplex plunger pumps. With ...

Flow: 36 m³/h
Head: 25 m
Input diameter: 80 mm

Engine Speed (rpm) 3000 Self-priming time (s / 4m) 120 Max. Suction Head (m) 8 Engine - LA178FP Engine Cont. output (hp) 5.5 Engine Displacement (cc) 296 Fuel Tank Capacity (L) C=3.5 CL=12.5

Flow: 0 l/min - 8.2 l/min
Pressure: 83 bar - 1,552 bar

... nominal pressure ratio of the pumps. when compressed air is first applied to the drive. It will start cycling at its maximum speed thus producing maximum fluid flow. At this stage, the pump is acting ...

A wide range of piston and diaphragm pumps are available for use with fluids from water consistencies up to pastes. Materials include: - Adhesives - Epoxies - Lubricants - Mastics - Silicones - ...

Flow: 0 us gal/min - 5.3 us gal/min

Keep your hopper full and your production non-stop with our new iPump transfer pump. Combined with our gentle pumping technology and its small footprint, the iPump quickly transfers products without sacrificing ...

The positive displacement pumps mod. PO-CA are designed for the low speed conveying into pipelines of foodstuff products like vegetal fats, chocolate and by-products, creams, etc. at the liquid state. The pump ...

Flow: 500 l/min - 1,440 l/min
Pressure: 133.3, 120 bar
Power: 1.1, 2.2 kW

VACUUM-MEKOs are diaphragm vacuum pumps with numerous advantages and high flexibility of use. Thanks to the diaphragm technology, VACUUM MEKOs work without oil and are particularly clean ...

Flow: 0 m³/h - 122 m³/h
Pressure: 12 bar
Fluid temperature: -10 °C - 140 °C

... without the need for pipework disassembly. SLA pump is a bare shaft rotary lobe pump. It is made of a stainless steel. Pump casing and cover, and two-lobe rotors with sanitary attachment. SLA ...

... shorten the time spent on it, so as the and wells' economic benefits increased, the shear pump by Kosun is performing good. The characteristics of the shear pump by Kosun: 1. Greatly enhances the hydration ...

Flow: 0.0008 l/min
Pressure: 1 bar

This micro dosing pump DosiClip® dispenses the specified volume (in the region of 14 µl to 36 µl) of liquids or chemicals with high precision. The pump has its own housing and can be ...

Flow: max 1080.0 l/h
Pressure: min 30.0 bar

... the JMB-S unit is the first of its kind to be fitted with a 12V control system. Thanks to a radial pump with 3 ceramic plungers, a brass/nickel-plated pump head and a 12V boiler with separate motor the ...

Flow: 0.5 l/min
Pressure: 80,000 Pa - 120,000 Pa

Brand Name: AE Sampling flow: 0.5L/min Indicator light: status, charge Ingress protection: IP55 Operating temperature: '-10℃～55℃ Operating humidity: 10～95%RH non-condensing Operating pressure: 80-120kPa Battery: rechargeable lithium ...

Pressure: 5 psi - 80 psi

The DV-7000 Heli-Flow® pump is a third-generation encoded auger pump. The pump has a floating head for use with footed needles to make fast, repeatable dots of solder paste and silver ...

Flow: 1,600 l/min
Head: 45 m

WP 25 is a professional water pump with hydraulic motor designed for pumping clear and muddy water with suspended solids with dimensions up to mm 20. The hydraulic functioning assures: HIGH POWER, SAFETY, RESISTANCE ...

PVA’s PCTP Pneumatic Cartridge Pump operates by flowing material directly from disposable plastic cartridges via a pneumatic linear drive. PCTP has no moving components or seals, eliminating the risk of wear. It’s also ...

Flow: 0 m³/h - 200 m³/h
Pressure: 16 bar
Head: 0 m - 100 m

Material Plastic Design Standardized Chemical Pump (ISO 2858, ISO 5199) Size DN 32 - DN 80 Delivery rate Qmax. = 200 m3/h Delivery head Hmax. = 100 m Temperature -50 °C to +190 °C Nominal pressure ...

Flow: 1.4 m³/h - 194.4 m³/h
Pressure: 0 Pa - 2,500,000 Pa
Head: 20 m - 230 m

... of pump are located on the same horizontal line and are of the same diameters, so that it can be mounted, just like a valve, in pipeline. Combined with the advantage of high pressure of multistage pump, ...