Flow: 0.1 l/min - 1.8 l/min
Pressure: 15 bar
Application(s) : Paints Specification(s) : Light weight gear pump / Robot arm design / Shaft flushing technology Fast and efficient flushing This very high precision metering gear pump meets all ...
POMTAVA SA
Flow: 0.03 l/min - 0.6 l/min
Pressure: 15 bar
... depending on the product involved Standard rotation :Clockwise rotation (A) Input/Output :2 holes 0 6mm on the rear of the pump. Delivered with connecting block G1/4DD Drive shaft diameter :0 12mm with a 4mm key Drive ...
POMTAVA SA
Flow: 0.03 l/min - 0.6 l/min
Pressure: 15 bar
... depending on the product involved Standard rotation :Clockwise rotation (A) Input/Output :2 holes Ø 6mm on the body of the pump. Delivered with connecting block G1/4 Drive shaft diameter : Ø 12mm with a 4mm key Drive ...
POMTAVA SA
Flow: 0 l/min - 0.02 l/min
... A second PT-SP multi-syringe pump is used as the media refilling pump. It is connected to the master PT-SP pump and automatically triggered by the master pump to refill ...
Flow: 4.2 l/min
Pressure: 264 bar
Optimum spraying results due to low pressure fluctuations Robust unit with few wearing parts and simple assembly and disassembly Minimalist design: all operating elements positioned on the front and thus quickly accessible The WIWA ...
WIWA
Pressure: 8, 96 bar
... contrast to screw pumps, WIWA THICK FILM PUMPS can be rinsed and cleaned with thinner without any problems. Thus, they are also ideally suited for processing epoxy-based materials. Thanks to the use of ...
WIWA
Flow: 25 l/min
Pressure: 8 bar
Weight: 10 kg
... material hose. Positive features include the low air consumption, the pressure limitation and the compact size, with which you will not feel crowded even on small construction sites. Fields Of Application Cavity ...
WIWA
Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m
... controlled by CM control module. - Multistage pump made of AISI 304 stainless steel. An inverter allows 4HS to: - Change pump speed to maintain set-pressure regardless of water demand. Consequently ...
NASTEC
Flow: 0 m³/h - 18 m³/h
Pressure: 3 bar
Head: 2.5 m
SUND is the Nastec range of solar pumps for the circulation and filtering of pool water. It guarantees: Energy saving thanks to photovoltaic energy supply and variable-speed operation. Quick and simplified installation ...
NASTEC
Flow: 0.5 m³/h - 8 m³/h
Head: 10 m - 60 m
Power: 800 W
... the pumped water. The flow rate is directly proportional to pump speed while the pres-sure supplied is kept almost constant. In this way, unlike a centrifugal pump, the helical rotor pump ...
NASTEC
Flow: 31 m³/h
Pressure: 8 bar
Head: 62 m
Wide range of pumps for domestic and industrial applications.
LOWARA
Flow: 0 l/min - 0.5 l/min
Pressure: 0 mbar - 500 mbar
Head: 17 mm
CMP-11G,mini gas pump,diaphragm micro pump are well suited for gas sampling, transferring, evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 0.1 l/min - 10 l/min
Pressure: 0.1 bar - 5 bar
Head: 17 mm - 40 mm
Custom Design and Manufacture Vacuum Gas Liquid and Brushless Miniature Pumps With Compact Size and Light Weight.
ALLDOO Micropump | Micro Diaphragm Pumps
ALLDOO Micropump | Micro Diaphragm Pumps
Power: 1,400 W
Length: 195 mm
Width: 195 mm
Magnetic pump • Total dimensions L x W x H: 195 x 195 x 355 mm • Power: 1400 W • Alloy capacity: 8 Kg • Maximum PCB dimensions: 160 x 500 mm • Maximum temperature: 300 ° C • Heating time: 1h Pot of ...
Flow: 34 l/h - 336 l/h
Pressure: 238 bar
Weight: 15 kg - 38.2 kg
The Williams “W” Series Plunger Pumps offer a packed plunger design The Williams “W’ Series is a piston plunger pump with a mechanical seal. It is capable of precisely injecting chemical into a wide ...
Williams Milton Roy
Flow: 35 l/h
Pressure: 903 bar
The “V” Series pump is a range of compact, self-contained, pneumatic metering pumps suitable for injecting a wide variety of chemicals that range from 0.07 gph to 9 gph (0.27 lph to 34 lph) and pressures ...
Williams Milton Roy
Flow: 111.66965, 2, 5 l/h
Pressure: 3,000, 2,500, 1,600 psi
Weight: 12.2, 55.1, 62.1 kg
WILROY Series Hydraulic Diaphragm Pump The WILROY metering pump is a unique blend of Williams and Milton Roy pump technology The WILROY is a pneumatic-hydraulically actuated diaphragm ...
Williams Milton Roy
Head: 60 mm - 260 mm
Power: 250, 120, 60, 180 W
... ) : 60 • Weight (Kg) : 2 • Packaging (mm) : 25X25X30 • Draught (mm) : 60 The continuos service self-priming electric pumps are suitable for continuos coolant flow and assure absolute operating safety even at high temperatures.
Flow: 0.8 l/min - 5 l/min
Fluid temperature: 0 °C - 45 °C
Length: 112 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Flow: 2 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Flow: 1 l/min - 300,000 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
A, AD Type Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made of a ...
Elettromeccanica Delta S.p.A.
Flow: 0 m³/h - 120 m³/h
Pressure: 0 bar - 35 bar
The FKL series features circumferential piston pumps designed for special pumping applications. These pumps operate at 35 bar maximum pressure with up to 120 m3/h flow rates. Available in ten different ...
FRISTAM
Flow: 1,700 us gal/h - 8,000 us gal/h
Rule your dewatering! Backed by the Rule brand of DC pumps, a brand enjoying over 45 years of operational excellence, the Evacuator series is a new line of high efficiency portable utility pumps. Providing ...
RULE INDUSTRIES
Flow: 7 l/min - 40 l/min
Pressure: 2 bar - 8 bar
Input diameter: 90, 80, 48 mm
The full-flow pumps of the TF series for wells produced by DIMACO S.a.s., make it possible to operate without need to external controls or sensors. The pumps are in fact able to check inside the fluid ...
Flow: 103 m³/h
Pressure: 34 bar
The enhanced design of Ampco’s patented ZP3 series positive displacement pumps is now leading the industry. It sets the standard for PD circumferential piston pump technology with a simplified yet state-of-the-art ...
Flow: 0.1 l/min - 16.2 l/min
Pressure: 40 bar - 2,900 bar
... air filter, air pressure regulator, air lubricator, air pressure gauge, air pressure limit valve, pump on/off control, oil pressure gauge. All pumps supplied complete with a full test certificate. ...
Larzep
For measuring the soot level manually Advantages Rugged and reliable 10 stroke Soot Test Pump Long hose: ideal for difficult to reach measurement openings Non centered soot spot, allows many tests on ...
Flow: 5.5 m³/h
Head: 7 m
Power: 300, 160 W
... integrated non-return valve puddle pump FSP 330 with ENS 1.1 fits into pipes with an inner diameter larger than 200 mm protection grade IP 68 – fully submersible Application portable pump ...
zehnder pumpen
Flow: 7 m³/h
Power: 130, 300 W
Fluid temperature: 40, 90 °C
... mounted compact float switch (fits into pipes with an inner diameter larger than 250 mm) protection grade IP 68 – fully submersible Application pumping of clear water and waste water from pits, drainage manholes, ...
zehnder pumpen
Flow: 7 m³/h
Power: 130, 300 W
Fluid temperature: 40, 90 °C
... drainage manholes, cellars etc. portable pump for emergency drainage drainage of domestic waste water without faeces from showers, washing machines, washbasins etc. Scope of delivery pump ...
zehnder pumpen
Flow: 0.12 l/h - 600 l/h
Pressure: 7 bar
Fluid temperature: 5 °C - 45 °C
The latest pump in the Qdos® range, Qdos H-FLO is designed specifically for higher flow rates . Delivering the same accuracy and reliability as other Qdos metering and dosing pumps. Qdos H-FLO pumps ...
Watson-Marlow Fluid Technology Group
Flow: 9,000 m³/h
Pressure: 40 bar
Head: 190 m
... back to the pump at the same time. Thus, operating as processes pumps, they cover a wide range of applications in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, ...
ANDRITZ
Flow: 11 l/min
Pressure: 124 bar
Weight: 18.1 kg
... high-output piston pump and EvenFlow Valve for consistent spray delivery. EvenFlow Valve Easy Set-up & Operation Smooth, even material flow with air regulators and pressure gauges High-Output Piston Pump Time-Saving ...
GRACO
Flow: 7 l/min - 40 l/min
Pressure: 25 bar
Head: 40, 60 m
The S 5 EV plastering machine is a modular system. The S 5 EV can be modulared with the TM pan mixer. The pan mixer enables you to mix high-quality materials delivered as bagged material. It is suitable for a variety of material such ...
PUTZMEISTER
Flow: 0.05 l/min - 6.5 l/min
Pressure: 6, 4, 15 bar
Fluid temperature: 0 °C - 95 °C
... Series gear pumps were designed from scratch to be everything a gear pump should be: durable, leak-free, reliable, chemically inert and quiet. The Silencer Series precision gear pumps ...
Diener Precision Pumps Ltd
Flow: 5 l/min
Pressure: 0.8 bar
Fluid temperature: 125 °C
... free vacuum or pressure source, in a tough and compact polycarbonate case which conforms to IEC 1010 safety. • Whisper quiet, continous operation and ruggedly reliable. • Optional vacuum ...
CHARLES AUSTEN PUMPS LTD / BLUEDIAMOND PUMPS INC
Flow: 4 us gal/min - 16 us gal/min
Pressure: 5.5, 6 bar
Head: 3.05 m - 4 m
Furon A2 Pumps from Saint-Gobain feature a 100% PFA and PTFE wetted flow path which contain no metal parts or elastomeric seals, assuring compatibility with even the most aggressive chemicals. These high-purity pumps ...
Saint-Gobain Performance Plastics - Process System
Please specify:
Help us improve:
remaining