Pumps for the food industry

Flow: 0.01 l/h - 18 l/h
Pressure: 10 bar - 250 bar

... diaphragm metering pump ORLITA Evolution mikro EMFa is ideally suited to ultra-precise micrometering in a very wide range of processes. Typical applications include metering additives in processes in the oil, gas and ...

Flow: 7.5 l/h - 78.5 l/h
Pressure: 2 bar - 25 bar
Power: 78 W

... gamma/ XL. The pump’s operating menu includes ordering information for the wear parts required. Designed as a smart product, it can also be connected to our web-based IIoT platform. The user can use this to monitor ...

Flow: 6 l/h - 65 l/h
Pressure: 7 bar
Power: 50 W

... peristaltic metering pump to the ProMinent product range. ProMinent is making use of its decades-long experience in the metering pump sector to bring together the best of two worlds. Valve-free metering ...

Flow: 240 l/min
Head: 13 m
Output diameter: 43 mm

... individual parts. The pump has minimal dead spots. The drive shaft, the inner and the outer tube are made of stainless steel (316 Ti resp. 1.4581). The pump is also available as FOOD ...

Flow: 240 l/min
Head: 30 m

The universal Drum pump with mechanical seal F/FP 430 can be used for various media and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can ...

Flow: 50 l/min
Head: 8 m
Output diameter: 0 mm - 43 mm

Pre-assembled pump kit for food and pharma. The pump-kit is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily ...

Flow: 0 l/min - 50 l/min
Head: 0 m - 19 m
Power: 500 W

Pump set - Food | Food & Pharma area The electric pump set is suitable for low to high viscosity media in the food & pharmaceutical ...

Flow: 0 l/min - 50 l/min
Head: 0 m - 12.3 m
Power: 320 W

Battery Pump Set - Food | Food & Pharma Sector The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application ...

Flow: 0 l/min - 244 l/min
Head: 0 m - 15 m
Fluid temperature: 100 °C

Food product pump - B200 Niro* | 0151-403 The horizontal pumping unit is suitable for emptying aqueous and fatty foodstuffs from IBC containers or tanks and is the perfect alternative ...

Flow: 7 m³/h - 725 m³/h
Pressure: 15, 14, 20, 18 bar
Head: 3 m - 130 m

... Model The APV W+ Pharm model has been specifically developed to meet the stringent requirements of the pharmaceutical and biotech industries with features that provide ultra-hygienic operation. Equipped ...

Flow: 32 us gal/min - 2,300 us gal/min
Pressure: 14, 20, 25, 18 bar
Head: 17'00" ft - 450'00"

W+ centrifugal pumps from SPX FLOW are designed to achieve total cost optimization with high efficiency and product dependability. They are installed in countless process facilities around the world ...

Flow: 522 m³/h
Pressure: 25 bar
Head: 0'00" ft - 155'00"

... its entire operating range. The inducer further enables the Wi+ pump to handle viscous or gaseous products beyond the range of other centrifugal pumps. The Wi+ is unique among inducer pumps, ...

Pressure: 0 bar - 240 bar

... climates Applications Heavy industries (paper, steel and other process industries) Mining and mineral processing Machinery workshops Food and beverage Cement ...

Pressure: 0 bar - 500 bar
Output diameter: 0.8 in

... Designed to fit large drums or containers, PowerMaster III pump units are ideal for lubrication systems using substantial quantities of lubricant. The modular combination of various air motors with pump ...

Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar

1”1/2 non-metallic diaphragm pump The ARO nonmetallic 1”1/2 PD15P-XXS-XXX air operated diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. ...

Flow: 0 l/min - 697 l/min
Pressure: 1 bar - 8 bar

2” non-metallic diaphragm pump The ARO nonmetallic 2” PD20P-XXS-XXX compact pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It ...

Flow: 45.4 l/min

The ARO Ported Sanitary Transfer pump is a specialty application pump manufactured by Ingersoll Rand. It consists of an electro-polished 316 stainless steel fluid part and a bolted construction. It is ...

Flow: 8 l/s - 4,500 l/s
Power: 500 kW

... its yield too far from the maximum value. PA Archimedean Water Screw Pumps are used in waste water treatment, in drainage and irrigation applications, in the food packaging industry, ...

Flow: 0 l/min - 7 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 60 m

Fluid connections: 1/4” BSP Air connection: 4 mm Max Suction Lift Dry: 3 m Max Suction Lift Wet: 9,8 m Max Solid passing: 2 mm Noise level: 62 dB Max Viscosity: 5.000 cps Displacement per Stroke: 18 CC~

Flow: 0 l/min - 65 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining ...

Flow: 0 l/min - 250 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining ...

Flow: 0 m³/min - 4 m³/min
Head: 0 m - 16 m
Power: 0.25 kW - 0.75 kW

... corrosion-resistant pump designed for handling screened wastewater or clean water. The major wetted parts are made of 304/316 stainless steel and resin. The top discharge, flow-thru design always cools the motor with ...

Pressure: 0 bar - 0.772 bar

... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...

Flow: 1 l/min - 7.4 l/min
Pressure: 0 bar - 0.772 bar
Input diameter: 0.25 in - 0.5 in

Variable speed peristaltic pump designed to handle liquids of low to high viscosity. Ideal for laboratory, processing, and OEM applications. Design Features Economical, compact design Unique ...

Flow: 0 m³/h - 0.078 m³/h
Pressure: 0 bar - 0.869 bar
Input diameter: 0.25 in - 0.5 in

Variable speed peristaltic pump designed to handle liquids of low to high viscosity. Ideal for laboratory, processing, and OEM applications. Design Features Economical Compact design for ...

Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar

... conveying pump from A to B, to be used in barrel emptying systems, in the food and cosmetics sector and for hot filling and cold filling. Accessories: - hopper with 10 l or 50 l - manifolds with ...

Flow: 4 m³/h - 150 m³/h
Pressure: 24, 18 bar

NEMO® progressing cavity pumps in the FSIP® (Full Service in Place) design allow you to save up to 66 percent on servicing time. Available in three variants, these pumps are versatile and can be utilized ...

Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar

The NEMO® BY block pump, with its industrial design, is versatile and can be applied in environmental technology, the food and chemical industries, as ...

Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar

... ® SY progressing cavity pumps are employed in challenging applications for continuous, pressure-stable, gentle, and low-pulsation conveyance, as well as speed-proportional dosing, in almost every industry ...

Flow: 6.5 m³/h - 70 m³/h
Pressure: 10 bar
Fluid temperature: 100 °C

... Eccentric Disc Pumps have been designed for use in a wide range of pumping applications in the food, cosmetic and pharmaceutical industries, all of which require extremely ...

Flow: 1 m³/h - 36 m³/h
Pressure: 16, 6, 10, 9 bar
Length: 445 mm - 906 mm

Mouvex® SLS Series Eccentric Disc Pumps have been designed for use in a wide range of pumping applications in the food, cosmetic and pharmaceutical industries, all of ...

Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m

... solids from reaching bearing and seals Product lubricated slide bearing Standard mechanical seal CombiTherm ensures uniform process temperatures while keeping damaging heat away from seal faces and bearings. CombiTherm ...

Flow: 0 m³/h - 30 m³/h
Pressure: 0 bar - 4 bar
Fluid temperature: 55 °C

Industrial flexible impeller pump for standard and hygienic applications Polished stainless steel for hygienic applications Industrial stainless steel for ...

Flow: 0 m³/h - 130 m³/h
Pressure: 16, 10 bar

... Drive pumps are therefore not only environmentally friendly they also contribute to improved safety in chemical and process plant environments. Complying amongst others with the ATEX ...

Flow: 1.8 m³/h - 150 m³/h
Pressure: 150 psi - 500 psi
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility. ...

Flow: 1.1 m³/h - 102 m³/h
Pressure: 10.3, 15.5, 13.8 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS Tru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps. Tru-Fit pump model advantages include: ...

Flow: 1.3 m³/h - 102 m³/h
Pressure: 13.8, 10.3 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS The durable Waukesha Clean-out-of-Place (COP) Positive Displacement "Can-Do Pump". Versatile in application, its reliability has made it the industry ...

Flow: 20 l/min
Pressure: -0.187 bar - 0.18 bar
Power: 21 W

The VC 0201B assembled by Nitto, is an AC Dual Pump that features an attainable vacuum of -187 mbar. This device is powered by a 230 V or 120 V of rated voltage with a 20 l/min of rated airflow. In addition, ...

Flow: 25 l/min
Pressure: -0.213, 0.1, 0.2 bar
Power: 27 W

The VC0301B is a diaphragm pump with attainable vacuum pressure -213 mbar and 25 l/min rated airflow. The rated voltage of the pump is 230 V and 120 V to produce maximum 0.2 bar pressure ...

Flow: 0.35 l/min - 0.5 l/min
Pressure: 30 mbar - 350 mbar

The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...

Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C

The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps ...

Flow: 0 m³/h - 250 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

... gear pump designed to handle corrosive liquids ROTAN® CD - Chemical Duty. Internal gear pumps in stainless steel, designed to handle corrosive liquids. CD pumps ...

Flow: 0.12 m³/h - 24.58 m³/h
Power: 0.18 kW - 11 kW

Chocolate pump designed for pumping media with high viscosity DESMI delivers technically advanced pumping solutions for the Chocolate Industry. ROTAN® can offer a complete series of internally toothed ...

Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m

... liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock farms and industrial plants

Flow: 0 l/min
Pressure: 0 bar
Head: 1 m - 15.3 m

... opposing silicon carbide mechanical seals in oil sump, and V-ring in direct contact with the liquid. Ecological dry motor. Pump body in single casting with motor casing.

Flow: 0 l/min
Pressure: 0 bar
Head: 1 m - 27 m

... opposing silicon carbide mechanical seals in oil sump, and V-ring in direct contact with the liquid. Ecological dry motor. Pump body in single casting with motor casing.

Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m

Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...

Flow: 0.5 m³/h - 8 m³/h
Pressure: 0 bar - 100 bar
Head: 0 m - 45 m

... ranging between 0.5 to 8 m³/h, and cannot be realised with a reactor pump. For this reason, Egger has developed a pilot pump S that meets all requirements for commercial process pumps. ...

Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW

... glaze, mould filling, filter press feeding BUILDING : fibrous mortar, plaster, light concrete, cement flooring CHEMICAL INDUSTRY : various acids, PVDF latex, alcohol, soap, non aromatic ...

Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW

... Several tube materials suitable for the huge majority of fluids, chemicals and applications Albin Pump KM Series cased-drive tubing pumps provide process confidence and offer cost savings ...

Flow: 7.9 l/h - 126 l/h
Pressure: 6.9, 7.6, 2.1, 3.4, 4.5 bar
Power: 0.18 kW

... Several tube materials suitable for the huge majority of fluids, chemicals and applications Albin Pump KM Series cased-drive tubing pumps provide process confidence and offer cost ...

Flow: 0 us gal/min - 45,000 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F

2000 pumps set the standard in positive displacement pumping applications. The proprietary 2000 gear-type universal joint design effectively handles radial and thrust loads for maximum performance and long life. These ...

Flow: 0 us gal/min - 200 us gal/min
Pressure: 0 psi - 225 psi
Fluid temperature: 14 °F - 350 °F

... ,100 psi; capacities from .02 to 450 gpm Typical Applications • moyno l frame pumps • High-pressure water • Pastes & gels • Food, wastes & by-products • Chemical feed & sampling • ...

Flow: 0 us gal/min - 1,850 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F

The Epsilon Pump is a line of technically engineered progressing cavity pumps designed to give least whole life costs and reduced spares requirements. The Epsilon Pump incorporates ...

Flow: 0 l/min - 100 l/min
Head: 0 m - 42 m
Power: 0.05 kW - 0.37 kW

Immersion Pumps in Plastics series KTF are suitable for various water supply problems. These pumps are also suitable for a wide range of chemical liquids. No shaft seal is required, ...

Flow: 0 l/min - 390 l/min
Head: 0 m - 42 m
Power: 0.63 kW - 2.94 kW

Immersion Pumps in Plastics series KTF and KTB are suitable for various water supply problems. These pumps are also suitable for a wide range of chemical liquids. No shaft seal is ...