Pumps with mechanical seals

Flow: 20 l/h - 170,000 l/h
Pressure: 15, 120 bar
Fluid temperature: 0 °C - 300 °C

... chemical pumps from the CHEM series can be operated horizontally, vertically and also as submersible pumps lowered in medium. Advantages at a glance: Seals Different seal ...

Flow: 3,000 m³/h
Pressure: 25 bar
Head: 125 m

ISO or JIS 40 bar flange drilling mm-dimensioned O.D. of mechanical seal sleeve mm-dimensioned bearing locknut mm-dimensioned coupling extension Design Features Hydraulic Coverage Line designed ...

Flow: 1 m³/h - 337 m³/h
Pressure: 0 bar - 16 bar
Head: 1 m - 99 m

... operating reliability ensured by KSB mechanical seal with multi-spring arrangement and reliable venting during pump operation Safety barriers: Special contour ensures reliable removal ...

Flow: 0.1 m³/h - 6,700 m³/h
Pressure: 16 bar
Head: 0.1 m - 3.5 m

... monitored by temperature sensors to prevent it from overheating Easy to install Double safety by two bi-directional mechanical seals with oil reservoir filled with environmentally friendly oil Leakage ...

Flow: 72 m³/h - 1,277 m³/h
Head: 17 m - 150 m

... •Double mechanical seal design •Hydraulic motor circuit designed to allow automatic start and stopping without damage •Safe pump-end to minimize risk of electric shock or explosion •Simple ...

Flow: 9 us gal/min
Head: 14'00"
Fluid temperature: 104 °C

Centrifugal Pumps are designed to transfer both corrosive and non-corrosive fluids at maximum hydraulic efficiencies. Centrifugal Pumps are not self-priming and must be used in applications where flooded ...

Flow: 2.8 m³/h - 124.5 m³/h
Pressure: 150 psi - 200 psi

Polymers, chemical processing, bulk transfer, asphalt, chocolate, adhesives.

Flow: 4.8 m³/h
Head: 9 m
Power: 0.18 kW

... loaded with particules, the plastic design guarantees an excellent chemical compatibility. Easy integration The mechanical seal allows a small footprint. Excellent wear resistance Ultra-durable ...

Flow: 500 l/min
Head: 40 m
Power: 0.18 kW - 5.5 kW

... to 3 mm grain size and 10 Vol. % possible) » easy to maintain (wear parts and the mechanical seal can be changed swiftly) » universally applicable, quiet and compact » various chemical ...

Flow: 8.4 m³/h
Head: 90 m
Power: 1.5 kW

... borehole pumps from the EASYWELL family. Its stainless steel structure gives the E5MX resistant to corrosion. Technopolymer impellers and diffusers ensure high resistance to sand. The electric motor is protected by ...

Flow: 7 l/min - 564 l/min
Pressure: 1 bar - 40 bar
Weight: 22 kg

... pow­er­ful - this is our new screw pump in­no­va­tion FLEXCORE. Not only can it be in­stalled in var­i­ous ex­ist­ing pip­ing sys­tem, it also im­presses with a broad ap­pli­ca­tion range. For the start of the new ...

Flow: 1 m³/h - 200 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m

Plastic Lined Horizontal - Single Stage - Centrifugal pump with Mechanical Seal Lining: PP (Polypropylene) Long-coupled and Close-coupled executions Versatility: Suitable for handling ...

Pressure: 16 bar

... High reliability through optimum design of the pump and mechanical seal RG4 for solids •Standardization possible: mechanical seal of conventional ...

Flow: 0 m³/h - 360 m³/h
Head: 0 m - 105 m

... coupled electric motor driven FEATURES • Close coupled pump set. Choice of 190 motor/pump combinations • Space saving • Most cost effective solution • Incorporates mechanical ...

Flow: 0 m³/h - 6 m³/h
Head: 0 m - 7.5 m
Power: 0.37 kW

... ATEX Seal o-ring materials – EPDM – VITON® The weight refers only to the packaging without the pump inside Accessories FLANGE KIT (DIN standard – ANSI on request): – KITFLANGMB080P ...

Flow: 1,200 m³/h
Pressure: 16 bar
Head: 80 m

... easy-to-service mechanical seal Tailor-made mechanical seal Each MUNSCH shaft seal is matched to the specific application. Being the linchpin in ...

Flow: 4.9 m³/h - 235.7 m³/h
Pressure: 4 bar - 24 bar
Power: 2.2 kW - 45 kW

... carried out on-site without the need to remove the pump from its installation. This significantly reduces downtime and optimizes the productivity of industrial operations. The PCM EcoMoineau™ MX pump ...

Flow: 60 l/h - 6,000 l/h

... Internal Gear Pump Fluid Tech Systems offer “ROTOFLUID” brand internal gear pump Model “FIG” (Fuel injection Internal Gear Pump, LDO Gear Pump, Burner Firing Gear Pump, ...

Flow: 700 m³/h
Head: 130 m
Power: 200 kW

... construction according to 94/9/EC ANSI flanges Shaft sealing Single reverse mechanical seal SiC-SiC or SiC-Carbon (spring out of fluid) Double mechanical seal Options ...

Flow: 0 m³/h - 150 m³/h
Head: 70 m

MIT hygienic centrifuge pumps are used in food, pharmaceutical and cosmetics industries. Clamp type connection is used. 316 L stainless steel is used for body material. Special design of its fan and cover it reduces ...

Flow: 0 m³/h - 500 m³/h
Pressure: 10, 16 bar
Head: 0 m - 95 m

... with a single mechanical seal. The material options for the pump are dependent on the pumped medium. Currently, the pump is produced in one basic option as specified ...

Flow: 1,200 m³/h
Pressure: 16, 24 bar
Head: 160 m

Horizontal End Suction Pumps, design in accordance with ISO 2858. ​Materials : Cast Iron, Ductile Iron, Bronze, SS 304, SS 316 Flange : PN16/ PN 25 Applications : Petrochemical & Chemical Industry Pulp ...

Flow: 43 m³/h
Input diameter: 65 mm
Output diameter: 65 mm

... industrial pump (⌀ 65mm). Made in 316L Stainless Steel and ABS plastic, it is for example perfectly adapted for a use in wineries. Lowmotion 2.5 is washable and it is possible to disinfect it. Light and easy handling With ...

Flow: 0 us gal/min - 130 us gal/min
Head: 0'00" ft - 39'00"

... stainless steel construction; vortex design. Mechanical Seal: Drive lube silicon carbide sealing faces; all metal components of AISI type 300 stainless steel running in protected oil chamber. Elastomers: ...

Flow: 100 m³/h - 20,000 m³/h
Pressure: 145 bar
Head: 10 m - 1,200 m

The ZMS is a two stage, main pipeline, horizontal pump for the most stringent demands in process and transfer services. Its design includes a first stage double suction impeller for NPSH optimization and a between bearing ...