Regulating valves

The range of applications for dosing valves are mainly in the extrusion area. With this specific valve different additives and auxiliary materials can be purposefully inoculated into the plastic at a ...

DN: 0.45 in - 1 in
Pressure: 16 bar
Temperature: -40 °C - 160 °C

The Siral BSD3000 is a double ball valve with by-pass, service and drain functions, intended for hot/cold water, steam and glycol (50% content). It is capable of withstanding a maximum pressure rating of PN16 at temperatures ...

DN: 25 mm - 200 mm
Pressure: 10, 16 bar

... OUTFLOW TANKS. • THE RISING OPENING SYSTEM BREAKS THE SEDIMENT OR CRYSTALLIZED LAYER ON THE BOTTOM OF THE TANK BOTTOM DRAIN VALVE • Rising opening. • This model can be made, with manual action by handwheel, or by ...

DN: 300 mm - 1,000 mm
Temperature: 620 °C

One-piece body, centric disc Operating temperatures up to 620°C, depending on material selection Wafer type body for flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47 Face-to-face length according to manufacturer’s standard Mounting ...

DN: 0.125, 0.375, 0.5 in
Pressure: -1 bar - 20 bar
Temperature: -20 °C - 84 °C

... differential pressure, the High Resolution Valve provides superior performance over legacy needle valves. The high resolution electronic flow control valve The High Resolution Electronic ...

DN: 15 mm - 300 mm
Pressure: 1.6, 2.5, 4 MPa
Temperature: -29 °C - 180 °C

The ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for the regulation and control of the fluid. The hard-sealed V-shaped ball valve has a strong connection ...

... VDU Diverter valve has a new style that is dead space free, since there are no more crevices, nooks and other rubbish to think of. Therefore, the diverter valve is a seamless extension of plant piping. ...

DN: 0.5 in - 16 in

lubricated plug valves “standard type” are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection ...

DN: 40 mm - 600 mm

• gate valve • flange connections according PN10/16 • face to face dimension according EN 558/1-14/15 • easy to regulate the flow • full bore & smooth surface with minimal pressure loss • BV49A according to Aquafin specifications • ...

DN: 20 mm - 100 mm
Pressure: 25, 40 bar
Temperature: -20 °C - 80 °C

Fully welded steel ball valve, reduced bore, for natural gas transmission and distribution, BW ends, with handle.

JIS Standard Stainless Steel Y Strainer Flanged Connection , 10K~20K Rating Product Details: Place of Origin: - Wenzhou China Brand Name: - JIEYU Certification: - API ISO Ts CE Payment & Shipping Terms: Minimum Order ...

DN: 0.125, 0.25 in
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 80 °C

Throttle valve, both directions throttling (B) quick connector Hose 5/3, G 1/8, For throttling flow rates and regulating the piston speed of cylinders. Small dimensions, ideal for tight spaces. To ...

... Ball Valve Quick Details: Model NO.: Q41F Type: Floating Ball Valve Function: Blow-Down Valve Temperature: Normal Temperature Application: Industrial Usage, Water Industrial ...

DN: 50 mm - 350 mm

Disc Type Tank Bottom Angle Valve(referred to as Tank valve, Angle Bottom valve, Bottom drain valve, Flush mount valve etc) is designed to provide drainage ...

DN: 15 mm - 150 mm
Pressure: 16 bar

Ex-proof electric ball valve design with ISO 5211 platform to make the actuator directly installed. Mainly used to cut off or adjust the direction of the medium in pipeline, valve structure is easy operation ...

DN: 8 mm - 150 mm
Pressure: 10 bar - 40 bar
Temperature: 196 °C - 300 °C

... port way Ball Type Floating ball,fixed ball,V-shaped ball valve,The 3-way ball valve Stem Blowout-proof stem Seat Sealing Integral body seat ,seat welded and overlaid Valve ...

Pressure: 232 psi
Temperature: 140, 190 °F

... DCL electric actuated 3-way PVC ball valves are used as a diverter valve to control water and other media compatible with the materials of construction. Advantages of electric actuated ball valves ...

The 5A regulation valve is ideally suited for regulating the flow of gases and liquids. Due to its special design it is able to regulate and shut off media. The regulation valve is highly ...

The J644F-16P/R (SS) has a longer service life and is more cost-efficient compared to other ball valves. It is the best option to use when a water operation that is controlled by a free water hammer, fast response and ...

DN: 50 mm - 300 mm
Pressure: 10 bar
Temperature: -40 °C - 90 °C

... be installed as an end line valve, bottom discharge valve or tank dump valve The wafer valve can be transformed into a one-way Lug body valve thanks ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 40 bar
Temperature: -40 °C - 150 °C

Description 2/2-Way seat valve with control cone and electropneumatical positioner Impulse without differential pressure Body Stainless Steel, Red brass

DN: 50 mm - 250 mm
Pressure: 0.5 bar - 16 bar
Temperature: -10 °C - 80 °C

... being affected by the valve flow.   When there is no flow in the system, the valve automatically closes itself. When the valve in the system drops below its pressure value, the valve ...

DN: 0.25, 0.125 in
Pressure: 1,000,000 Pa
Temperature: 0 °C - 120 °C

Pressure regulating valves are classified into reducing valves and back-pressure valves. Reducing valves are adjustment valves that ...

Pressure: 55 bar
Temperature: -50 °C - 150 °C

Series 3030 and 3060 valves are safety accessories according to the definition contained in Directive 97/23/CE and are subject to the requirements of the Directive. These valves are conventional unbalanced ...

DN: 40 mm - 100 mm
Pressure: 4 bar - 10 bar
Temperature: 130, 150 °C

... special on the market this variant of the double seat bottom seat valve, in addition, the function of a changeover valve is realized. The advantage over the usual pass dual seat bottom seat valves ...