Regulating valves

DN: 8 in - 16 in
Pressure: 0 psi - 450 psi
Temperature: 121, 111 °C

... Type (S)ORIT evaporator regulating valves have a brass body and extended copper connections. They are available with a range of adjustable settings and pressure tap. The primary function of these valves, ...

DN: 20 mm - 150 mm
Pressure: 52 bar
Temperature: -60 °C - 120 °C

The ICM motor operated valves from Danfoss ICV Flexline™ series are quick and simple to handle, install and service due to their low weight and compact design. The valve is designed to regulate the expansion ...

DN: 1.813 in - 11 in
Pressure: 2,000 psi - 20,000 psi

The FLS-DA2 gate valve is designed for positive control of high-pressure frac valves and for many subsea and drilling applications. This design is a combination of our field-proven FLS gate valve ...

DN: 0.5 in - 4 in
Pressure: 17 bar
Temperature: -51 °C - 135 °C

... stringent requirements of the bioprocessing industry Weirless Radial diaphragm tank valves offer solutions to the most challenging applications. It is easy to weld our valves truly flush to the bottom ...

DN: 20, 10, 15, 25, 32 mm
Temperature: -40 °C - 120 °C

... a normally closed valve which means that it will move to a fully closed position in the event of a power loss. This feature reduces complexity by eliminating the need for an upstream solenoid valve or ...

DN: 15 mm - 200 mm
Pressure: 25, 16, 40 bar
Temperature: -10 °C - 450 °C

Service-friendly control valve to DIN/EN with flanged ends, either with linear or equal-percentage control characteristic at Kvs values of 0.1 to 630 m³/h and closing pressures of up to 40 bar; all internal parts are ...

DN: 0.5 in - 2.125 in
Pressure: 680, 700 psi
Temperature: -40 °F - 240 °F

Parker-Sporlan’s CDS valves are stepper motor actuated electric valves intended for use in direct expansion refrigeration and air conditioning applications. CDS valves are suited for ...

DN: 0.75, 0.625 in
Pressure: 34.5, 31 bar
Temperature: -28, -18, -8 °C

... pressure. The Parer LAC pressure control valves have a brass body with copper connections. These valves are nonadjustable. They perform the function of limiting flow of refrigerant from the condenser ...

DN: 3.35, 4 in
Pressure: 0 bar - 517.1 bar
Temperature: 0 °F - 250 °F

Rotary Systems’ timing valve is designed for applications that require automatic clamping and unclamping. This timing valve eliminates the need for a control valve or solenoid valve. ...

DN: 50 mm
Pressure: 690 bar
Temperature: -34 °C - 149 °C

CC metering valve is rated to 10,000 psig / 690 bar and contains a non-rotating stem to reduce seat and stem wear. The valve features over 20 turns from shutoff to full open, providing excellent flow ...

DN: 0.75 in - 1 in
Pressure: 103, 10.3 bar
Temperature: -40 °C - 82 °C

... high-pressure shut-off valves serve to provide overpressure protection by containment. Type 634 shut-off valve with internal registration is installed between a pressure reducing regulator and a downstream ...

DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -15 °C - 200 °C

Special features • - Consisting of single-seated globe valve and actuator • - Flanges or male thread connection and welding or threaded ends or female thread connection Accessories • - Type 2 NI Strainer Options ...

DN: 40 mm
Pressure: 0 bar - 0.6 bar
Temperature: 5 °C - 90 °C

2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents. Valves of this type are medium separated having a single ...

Pressure: 4 bar - 6 bar

Jet Edge’s patented Dual Pressure Valve is a remotely mounted valve that allows waterjet operators to control water pressure independently of the intensifier pump. This enables operators to run a number ...

DN: 50 mm - 200 mm
Pressure: 16, 10, 25 bar

... Face-to-face length: acc. to EN 558, basic series 1 With flange ends on both sides acc. to EN 1092-2 Control valve in globe valve design With rising stem With position indicator ...

DN: 40 mm - 100 mm
Pressure: 0.5 bar - 10 bar

The BERMAD Pressure Reducing Valve is a hydraulically operated, diaphragm actuated control valve that reduces higher upstream pressure to lower constant downstream pressure regardless of fluctuating demand, ...

DN: 50 mm - 225 mm
Pressure: 0.8 bar - 4 bar
Temperature: -10 °C - 80 °C

Applications The two-/three-way hose-type diverter valve ZWS/DWS is a distribution or collection unit for pneumatic conveying systems up to 4 bar (g) of powders and pellets in various industrial sectors. Design characteristics ...

DN: 0.5 in - 4 in
Pressure: 150 psi
Temperature: 73 °F - 180 °F

... Chemtrol® valves for the most reliable, versatile and economical valve option in commercial and industrial applications. Chemtrol® ball valves are backed by a 1-year limited warranty. ...

Pressure: 4,500, 2,500, 3,000 psi
Flow rate: 40 us gal/min

The CROSS SSD4 series selector valves are 6 way, 2-position units with cast-in metering notches for smooth operation. They provide an economical way of diverting flow to two separate hydraulic circuits. Features: SSD4: ...

Temperature: -45 °C - 260 °C

KLINGER BALLOSTAR® KHI BALL VALVES Decades of reliability guaranteed KLINGER Ballostar® KHI ball valves will keep up with stricter requirements and are assured to already meet future standards with ...

DN: 0.75 in
Pressure: 10 bar
Temperature: 10 °C - 60 °C

• Exclusive use in drain circuits. • Connections to rigid pipe or PE flexible pipe. • Female threaded end connectors.

Pressure: 30 psi - 150 psi

Walchem’s Multi-Function Valves (MFV) provide anti-syphon, back pressure, bleed, drain and pressure relief for your 11, 16 and 21 size E class metering pumps. These valves will prevent syphoning when ...

DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C

Combines three valves in one: Isolation Valve, Check Valve and Companion Flange Free floating flange allows easy alignment and installation of pumps Prevents gravity circulation Isolates ...