Resin pumps

Flow: 0 l/min - 75 l/min
Pressure: 0 bar - 8 bar
Fluid temperature: 140 °C

... situations where the B70V comes up against spatial or handling limits and thus rounds off our Eccentric screw pumps with a mobile variant. The pump is suitable for pumping aqueous to highly viscous Newtonian ...

Flow: 0 l/min - 75 l/min
Pressure: 0 bar - 8 bar
Fluid temperature: 140 °C

... our Eccentric screw pumps with a mobile variant. The pump is suitable for pumping aqueous to highly viscous Newtonian and non- Newtonian media as well as media containing solids and shear-sensitive media. ...

Flow: 0 l/min - 12 l/min
Fluid temperature: 100 °C
Input diameter: 54 mm

Drum & container pump-B70V HD-SR | Viscous media Eccentric screw pump tube B70V HD-SR Industrywith circulation/flushing connection for electric motors For pumping highly flammable liquids and for use ...

... materials • Available in ATEX design • Clean, oil-free high-performance drives The right pump for every material With the glueLine, DOPAG offers drum pumps for processing medium to high-viscosity ...

Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C

ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based ...

Pressure: 10, 30 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Flow: 0 m³/h - 48 m³/h
Pressure: 0 bar - 7 bar
Fluid temperature: 120 °C

... multipurpose peripheral flow AODD pump The TopAir series is one of the most complete lines of Air Operated Double Diaphragm pumps on the market. With eight sizes up to 800 l/min in a wide range of ...

Flow: 0 m³/h - 125 m³/h
Pressure: 22, 12, 7 bar

Shaft seal options include single and double mechanical as well as lip seals. Multi-foot for vertical or horizontal mounting. Heating/cooling systems for front cover. Built-on safety relief valves as an option. Connections from 20 mm ...

Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

... Thus, the life cycle costs for ED pumps are generally much lower than for pumps using two seals. Pumping of: • Isocyanate • Solvents • Hazardous organic liquids • Printing ink • Resin • ...

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 005 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 015 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 050 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...

Flow: 0.0012 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 8.9 W

Compact hermetic pump for continuous dosage The micro annular gear pump mzr-2961 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because ...

Flow: 0.00003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W

Compact hermetic pump for diskrete dosage The micro annular gear pump mzr-2965 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because ...

Flow: 0.0048 l/min - 0.072 l/min
Pressure: 0 bar - 5 bar
Power: 8.9 W

Compact hermetic pump for continuous dosage The micro annular gear pump mzr-4661 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because ...

Flow: 2.2 l/min
Pressure: 220 bar
Power: 3, 0.75 kW

... injection pump designed to reach efficient interventions in the most common cold injections applications of heat-sensitive expanding resins or sealants, for restoration and consolidation. It is recommended ...

Flow: 2.2 l/min
Pressure: 220 bar
Power: 3 kW

The Mirò Cold injection pump designed to reach efficient interventions in the most common cold injections applications of heat-sensitive expanding resins or sealants, for restoration and consolidation. The ...

Flow: 4 l/min
Pressure: 220 bar
Power: 1.1, 3 kW

The Dalì Cold injection pump designed to reach efficient interventions in the most common cold injections applications of heat-sensitive expanding resins or sealants, for restoration and consolidation. The ...

Flow: 0.03 l/min - 0.6 l/min
Pressure: 100 bar
Fluid temperature: 135 °C

... rear of the pump Sealing : Lip seals and liquid barrier (16KA) Rotation speed : From 10 to 200 min-1, depending on the product involved Standard rotation : Clockwise rotation (A) Input/Output : 2 holes Ø 6mm on ...

Flow: 0.03 l/min - 0.6 l/min
Pressure: 100 bar
Fluid temperature: 135 °C

... depending on the product involved Standard rotation : Clockwise rotation (A) Input/Output : 2 holes Ø 6mm on the body of the pump. Delivered with connecting block G1/4’’ Drive shaft diameter : Ø 12mm with a 4mm key Drive ...

Flow: 0.03 l/min - 0.6 l/min
Pressure: 100 bar
Fluid temperature: 135 °C

... depending on the product involved Standard rotation : Clockwise rotation (A) Input/Output : 2 holes Ø 6mm on the body of the pump. Delivered with connecting block G1/4’’ Drive shaft diameter : Ø 12mm with a 4mm key Drive ...

Pressure: 8 bar - 240 bar
Weight: 23 kg

... Sewer rehabilitation Materials Polyurethane injection foam resins Polyurethane Combi Injection Foam Resins Polyurethane Combi Resins Polyurethane injection resins Epoxy ...

Pressure: 8 bar - 256 bar
Weight: 33 kg

... Sewer rehabilitation Materials Polyurethane injection foam resins Polyurethane Combi Injection Foam Resins Polyurethane Combi Resins Polyurethane injection resins Epoxy ...

Pressure: 120 bar
Weight: 26 kg

... WIWA INJECT 2K 14015 GX is a pneumatic 2K piston pump with a mixing ratio of 1:1. The material pumps are connected to the air motor so that mixing errors cannot occur due to the positive control. The ...