- Robotics - Automation - Industrial IT >
- Automation >
- RS-485 I/O module
RS-485 I/O modules
The AMRIO series input/output extension modules are used to easily extend I/O signals of control systems. Modules from this series feature both ARION and MODBUS RTU communication protocols – the selection of the required protocol is done ...
AMiT, spol. s r.o.
C Programmable Remote I/O Module Cost-Effective programmable I/O module Support lwIP and BSD socket library and tiny web server Windows configuration utility included 1 x 10/100Mbps Ethernet interface 1 x Isolation RS-485 ...
Power Supply - 24 VDC Permissible Range - 20.4 - 27.6 VDC Power Consumption - 3W Dijital Inputs Nominal Input Voltage - 24 VDC Input Voltage - For Logic 0 - For Logic 1 10 VDC Input Current - 6mA max. Input Impedance - ...
Multi-Function I/O Module ● 4 Channels Analog input ● 2 Channels Analog output ● 4 Channels Digital input ● 4 Channels Digital output ● All Digital input channels can be used as 32 bit counters ● Support over voltage protection ● ...
Protech Systems
The IA-3088 is a Multi way Relay Controller that includes 8 Power Relays with an output rating of 10Amp @ 230VAC, 8 Digital Inputs and a Serial Communication Port. The relays may be operated by the corresponding Digital Inputs, by a predefined ...
Intelligent-Appliance
Brand: GCAN Model: GC-1008~GC-8012 Application: Input and output modules Type - Characteristic - Signal - Channel Digital input - GC-1008 - Digital input (PNP) - 24V DC - 8-channel GC-1018 - Digital input (NPN) - 24V DC - 8-channel GC-1502 ...
The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and ...
Data-Control PC
106-D2xx Series is a 32-Channel Digital I/O Motionnet® slave module. With CAT5 cable, 106-D2xx Series can be connected serially. It also equipped with RJ45 phone jack for easy installation and LED for effortless diagnosis. Features ● ...
Taiwan Pulse Motion
-8 Optically-Isolated, Non-Polarized Digital Inputs with Change-of-State Detection -8 Form C SPDT Electromechanical Relays Can Switch Up to 1 Amp Each -Relays Can be Configured for Level or Pulse Modes -Microcontroller ...
The module has a compact aluminium housing and offers the possibility of top hat rail mounting. The interfaces are quickly and conveniently available on the front panel. Using the 3-wire connection technology, all sensors can be ...
Sontheim Industrie Elektronik GmbH
8 digital inputs / 8 digital outputs DESCRIPTION : These modules are used with HMI, PLC or SCADA via Modbus RTU protocol. IO Studio is its PC software for setting communication. Data Acquisition Studio is its PC software for DAQ purpose. As ...
Etherent Remote IO Module(4DIN+4AIN+2AO+4DO) M100T Ethernet Remote I/O Module provides 4 optical-isolated digital inputs, supports Max. 700KMHz high speed pulse counter, 4 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA ...
W-M1B502 | 16-Ch Digital Input / 8-Ch Relay Output Module 16-Ch Digital Input / 8-Ch Relay Output Dry / Wet Contact Input Resistance 10KΩ Over-Voltage Protection 70 VDC Relay Output Channel 4 Form A,4 Form C Contact Rating 5A ...
ADVANIO TECHNOLOGY Co., Ltd.
PAMIO 2ENC4A ■ 4 analog inputs ■ 4 analog outputs ■ 2 RMS inputs
Power Automation
The M110T Ethernet Remote I/O module provides 4 optical-isolated digital inputs, supports Max. 10Mhz high speed pulse counter, 4 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high ...
The EMX-ESG614 provides 6 RS-232/422/485 ports based on the SMSC SCH3116 industrial temperature UART in the efficient EMX I/O form factor. Ports 1 - 4 support RS-232, RS-422, and RS-485 protocols, while ports 5 and 6 support RS-232 or ...
Two serial ports, 4 digital inputs, 4 relay outputs and Dallas 1-wire support Universal, programmable I/O device server with web server, Modbus/TCP and SNMP support. Serial ports, digital I/O and Dallas 1-wire support. • Relay Output ...
Intrinsically safe I/O module intended to control electrovalves. The electrovalves can be controlled in a twomode or smooth way (i.e. proportional control). I/O ports can be also applied as general-purpose binary interfaces. Communication ...
Thickness:20mm Description:Distributed I/O optical transmission - master module - Ethernet communication Application:Data transmission Series:88DMM2 Colour:black
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining