SIL 3 SWITCH/PROXIMITY DETECTOR REPEATER, RELAY OUTPUT DESCRIPTION The dual channel Switch/Proximity Detector Repeater, D5030D module, is a unit suitable for applications requiring SIL 3 level (according to IEC 61508:2010 Ed. 2) in ...
GM International srl
SIL 3 DIGITAL OUTPUT DRIVER, NE LOADS, LOOP POWERED DESCRIPTION The dual channel Loop Powered Digital Output Isolators D5040D is suitable for driving solenoid valves, visual or audible alarms to alert a plant operator, or other process ...
GM International srl
SIL 3 SWITCH/PROXIMITY INTERFACE DESCRIPTION The dual channel Switch/Proximity Detector Interface D6034D is a high integrity repeater, designed to interface contacts or proximity detectors (EN60947-5-6, NAMUR) and is suitable for applications ...
GM International srl
Order No.:108106 Type:0942 UEM 612 Description:4 DO - SAFETY: LioN-Link I/O module with 4 digital outputs (2 A), M12 sockets (4x), 5 poles, M12 actuator supply, one channel per socket, suitable for safety critical applications within ...
Belden Electronics GmbH Standort Neckartenzlingen
The integration of intelligent sensors and actuators, combined with shorter development times, is increasing the demand for high-performance I/O systems in automation. The I/O system 3000 combines a consistently flexible system design ...
Lenze SE
We automate where others capitulate – reliably, economically, and up to Zone 0/20 hazardous areas! ■ eXTReme temperature resistance from −40 to +70 °C (−40 … +158°F) ■ eXTReme isolation (up to 5 kV of impulse voltage per DIN EN 60870-2-1) ...
Safe digital and analog I/O modules are available with IP20 or IP67 protection. In addition to their normal I/O tasks, they also monitor the signal line as well as the connected sensors and actuators. Because they are integrated within ...
6 safe digital inputs (+24 V DC/3 mA/0.5 ms) 2 safe digital outputs (+24 V DC/2 A) Doubled clock output signal (short circuit proof) SIL 3/PL e, Cat. 4 So that inputs can be tested and crossed circuits can be detected, 2 non-safe ...
Integrated and optimized data availability along the entire value-added chain is the basis for innovative business models. This also places special demands on your distributed I/O: flexible scalability of the systems, high-performance ...
Siemens Safety Integrated
The ESX.iom is a CAN I/O module for 12V and 24V systems, used for expanding the inputs/outputs of a master control unit via CAN. Communication with the master control unit is through CANopen, CANopen Safety, STW protocol ECeS or J1939. ...
(STW) Sensor-Technik Wiedemann GmbH
The Eckelmann I/O system adapts to your application. From simple digital input, to analog modules, to special and safety modules for high-end applications, the UBM I/O system offers everything needed for an innovative machine concept. The ...
Up to PLd in accordance with EN ISO 13849-1 and SIL2 in accordance with IEC 61508 Screwless terminals for easy installation Status diagnostics via control outputs and LEDs Number of sensors can be increased to 4 per ...
The Ixxat Safe T100/CS offers device manufacturers an easy way to control safe I/O signals using a safe fieldbus protocol. The module meets the SIL3 safety requirement level as defined by IEC 61508 and Performance Level PLe / Category ...
IXXAT Automation
The ANTARES 8AIH Remote I/O Module is suitable for the direct linking of 8 intrinsically safe two-conductor transmitters. NAMUR sensors, optocouplers, wired and unwired mechanical contacts or other actuating elements can be connected ...
BARTEC
Open programmable and configurable FSoE master module for operation on EtherCAT networks Easy integration of safe drives (Safe Drive Profile) Fast-channel task with guaranteed processing time of 4 ms Safety control unit ...
BBH Products GmbH
MIOS system is a special design isolated signal remote I/O system, it linked a local area network designed to connect controllers to remote I/O chassis and replacement of discrete wirings by fieldbus or industrial Ethernet communication. MIOS ...
The F405 provides multiple I/O functions especially for Automatic Train Operation (ATO). All digital inputs can be operated with common GND or common positive voltage in the range of -110 V to +110 V. The pulse counter inputs can be ...
MEN Mikro Elektronik
【W-M1B201】8 Channels Analog Output Module Current Output Capacity 500Ω Voltage Output Capability 10V @10mA 8 LEDs as Analog Output and Fault Indicators Disconnection Detection 4~20mA Output Response Time 10ms Introduction W-M1B201, ...
ADVANIO TECHNOLOGY Co., Ltd.
iDEABOX 3 8AI Module (Thermocouple) iDEABOX I/O Series iDEABOX I/O Series are applicable to high-speed high-precision control of factory automation and machine automation, and can construct network based on EtherCAT network and gLink ...
Googol Technology (HK) Limited
Kuhnke FIO is a system of I/O modules to link the process signals within an EtherCAT network. It consists of the bus coupler and various I/O modules. The signal processing and the generation of system voltages for the I/O module occur ...
4AI Transceiver RAD-AI4-IFS4AI Transceiver RAD-AI4-IFS DIN rail mounted and can be combined with up to 32 io modules for the exact setup needed. The i/o module communicates with IFS modules such as the Indoor Transceiver RAD-900-IFS ...
KSM Safety Solutions Safe motion from a motion expert, Kollmorgen - Your skilled partner for safe motion control solutions. Safety logic, servo drives and motors and even complete safe automation solutions - Kollmorgen delivers matched ...
Restrict energy and pressure of local dangerous signal and intrinsic safety output Transfer Input and output signal of V;mA;mV
SMAAT TECHNIQUES SAS
Suitable for high-security requirements of industrial site monitoring for various signal. Monitor the short circuit between two signals. QSRN- two transistor signal control ● Monitoring of two transistors, photoelectric switch, ...
Please specify:
Help us improve:
remaining