Screw actuators

Can-Stack Linear Actuators Can-stack linear actuators contain a threaded rotor with a lead-screw shaft able to drive linear motion in both directions. The pressed steel ...

LoPro linear actuators are an actuated linear motion system based upon proven DualVee guide wheel technology for smooth and quiet motion over long lengths. Actuation options include AT series belt, ANSI ...

Stroke : 141 mm - 350 mm
Force: 3,000 N
Speed: 0 mm/s - 30 mm/s

The little powerhouse. For universal use, thanks to the turned guidance profile and the extremely small motor housing. • Load capacity: max. 3000 N push / max. 3000 N pull • Adjustment speed: max. 30 mm/sec. * • Stroke length: max. ...

Stroke : 750 mm
Torque: 3.5 Nm - 13 Nm
Speed: 0.06 m/s - 2 m/s

Overview PHD Plus® Series ECP Electric IP69K Cylinders are available in either ball screw or lead screw (polymer nut) versions, providing a wide range of high thrust ...

Force: 1,000 N - 3,700 N
Speed: 0.01 m/s - 0.04 m/s

... rotation Different type of internal thread for through going spindles Good self-locking properties Fast and powerful Order spindle separately Variant key The variants are formed by different internal thread ...

Stroke : 0 mm - 4,450 mm

Suited for the conveyance in various situations due to the free union of the modules. [Horizontal load capacity (single axis: 5 to 100kg. Combination: single axis to 4 axes.

Stroke : 30, 10 mm
Repeatability: 0.5 µm

LAH linear actuators are available in two models, LAH-46 for DC motors and LAH-80 for stepper motors. A precision ball screw provides positioning accuracy better than 4 microns and repeatability ...

... avoids catastrophic failure. Performance Benefits Right hand rolled thread 304 stainless steel screw with PTFE coating Self-lubricating Polyacetal, anti-backlash nut Lengths up ...

Force: 12.5 kN - 100 kN

... SDA is a rigid but modular direct drive linear actuator. The actuators can operate with faster linear speeds and higher duty in high load conditions. The SDA can be used as a single drive linear actuator. ...

... synchronous motor/actuator offers an economical choice of controlled linear motion for pulling, pushing, or lifting. The rotor assembly contains a nut which accepts a standard 1/4" diameter, 16 TPI, RH Acme screw ...

Stroke : 100 mm - 300 mm
Force: 500 N - 2,500 N
Speed: 4.4 mm/s - 18.6 mm/s

Linear actuators for direct current with dynamic force up to 2500N. These actuators include a range with supply voltages between 12-24V and can, depending on the type, be supplied with encoder, potentiometer ...

Stroke : 12 mm - 40 mm

Centering boss and locating hole for accurate positioning. Operating range of table is 0°~190° by angle adjusting screw. Compact design using double rack and single pinion. Hollow shaft standard for wiring ...

... required, the Uhing®-linear drive nuts are a state-of-the-art alternative to hydraulic and pneumatic actuators, chain feeding systems and lead screws.

Stroke : 0 in - 0.945 in

... supplied with either a ball screw or acme screw, and either a servo or stepper drive system. Nook Industries can provide a complete system from one source including motor, drive, controller, ...

Force: 187 N
Speed: 0.25 m/s

Consistent. Accurate. The ElectroCraft NEMA 11 stepper-based linear actuator is extremely consistent and made to handle loads up to 187N (42lbs) and speeds up to 254 mm/second (10 inches/second). All components have been ...

LINEAR ACTUATOR Features and Benefits: NEMA 08 (20.1mm) Frame Size Select Your Winding Select and Customize Your Leadscrew Select Your Nut Request further Modifications and Customizations

Stroke : 800 mm
Force: 500 N - 25,000 N
Speed: 0 m/s - 0.12 m/s

Force: 28 N - 3,000 N
Speed: 1.4 mm/s - 48 mm/s
Ambient temperature: -10 °C - 60 °C

DAM line with spindle pitch 3mm Direct current electric actuator with trapezoidal spindle pitch 3mm. Motor is parallel to the axle. Actuator body in zamac. Transmission with spur gear ...

Stroke : 500 mm - 1,000 mm
Force: 2,100 N - 10,000 N
Speed: 120 m/s - 6,000 m/s

■wormgear ■acme screw or ballscrew ■chrome plated Steel push rod ■life time grease lubrication ■duty cycle S3 30 % (5 min) at 30°C ■encoder on demand ■limit switches see HG/AL4-F ■for any spécial duty please contact our office

Stroke : 168 mm - 366 mm
Force: 600 N - 1,600 N
Speed: 5 mm/s - 25 mm/s

Actuator Type 110 D DC Actuator with worm gear drive. Rotating lead screw with spindle nut. Suitable for controlled inhibited operation with max. current 6 Amps. Additional external ...

Force: 50 kN - 160 kN
Speed: 0.04 m/s - 0.24 m/s

... version with ball screw spindle drive, increased load rating: rotating spindle, lifting cylinder Circumferential backlash basic gearbox <12 arcmin Input speed up to 5000 min-1 Linear speed: - trapezoidal ...

... screw) or MSK (ball screw) versions. These actuators cover a range of displacement forces ranging from 4000 to 50,000 N for speeds ranging from 5 to 120 mm / sec.

Stroke : 163 mm - 425 mm
Force: 3,000 N - 6,000 N
Speed: max 28.0 mm/s

The versatile, low-cost drive which improves even more the tried and tested MEGAMAT technology and offers a very large range of equipment options. Load capacity: max. 6000 N push / max. 3000 N pull Adjustment speed: max. 28 mm/sec. ...

Stroke : 50 mm - 1,000 mm
Force: 1 N - 16,000 N
Speed: 5 mm/s - 138 mm/s

HTW760 industrial linear actuator is a very powerful actuator designed for various app such as agricultural machinery, construction machinery, and industrial machinery. Difficult applications Require ...

Force: 500, 1,000 N

... ball screw, actuator tail integrated encoder, real-time feedback screw position, without any return switch, limit switch. The driving CX type is fixed by four screws ...