Seawater valves

DN: 8 mm - 150 mm
Pressure: 125 bar

Ball valve for applications in corrosive media (e.g. chlorides and dilute acids). With a PREN value between 42 and 47, suitable for seawater. 3-piece body, pressure class depending on the nominal size ...

DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C

PTFE lined centric butterfly valve for corrosive fluids and high-purity applications. Designed and manufactured for over 20 years in Switzerland, Bianca is built for long-lasting use in highly demanding media and environments ...

DN: 2 in - 8 in
Pressure: 15,000 psi
Temperature: -46 °C - 177 °C

Cameron’s first nonretrievable subsea choke was installed in 1975, and with more than 800 of these rugged chokes installed to date, they continue to demonstrate that they are a proven, reliable choice. Permanently mounted to a subsea ...

DN: 150 mm - 2,200 mm
Pressure: 10 bar - 25 bar
Temperature: -10 °C - 85 °C

... butterfly valve with epoxy coating. Perfect shut-off in either flow direction. Flanged ends to EN standards, body and valve disc made of nodular cast iron. Main Applications General irrigation ...

DN: 15 mm - 300 mm
Pressure: 16 bar - 400 bar
Temperature: -196 °C - 550 °C

Special features • - Consisting of angle valve and actuator • - Low-noise valve plug • - Pressure balancing to handle large pressure drops • - Optionally including RFID transponder with unique ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 420 bar
Temperature: -20 °C - 400 °C

The TECVAL CP-11 Needle Valve with Bridle for Pattern (MxF) boasts a unique design, having a bridle for pattern manometer and a backseat for free packing change in service. With a pressure capacity of up to 420 bar (6000 ...

DN: 40 mm - 600 mm
Pressure: 10, 16 bar
Temperature: 50 °C

Resilient-seated gate valve with bolted cover connection and face-to-face length of Basic Series 15 for sea-water applications. Proven design with innovative improvements, such as plastic sliding caps ...

DN: 100 mm - 2,000 mm
Pressure: 10 bar - 40 bar
Temperature: 80 °C

Body material Ductile iron Disc material Ductile iron PN (End) PN40 End Flanged Contact sealing EPDM Operating system Manual gear box

DN: 40 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -20 °C - 110 °C

... length ( option ) • - Square lever 30x30 mm for spécial key ( option ) USE : • - Fluids : Cold and hot water. dnnkable water • - Not advisable : Hydrocarbon, steam. gas. acids, oil. Fréon • - For temporary using. ...

DN: 40 mm - 1,800 mm
Temperature: -20 °C - 204 °C

... -7/7,4-6-2/5.11 Information provided is not contractual, data may be changed without notice. All rights reserved by Value Valves Co., Ltd.

... useful for seawater service. AFC Nickel Aluminum Bronze are in the highest demand from the following industries and areas: • Marine • Water & Seawater • Petro-chemical • Desalination • ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -35 °C - 200 °C

The KTN 266ITT is our butterfly valve with a wafer type connection, seat and ptfe disc . The ptfe seat and disc give the valve great resistance to corrosion . The range is from DN 40 to DN 300 , replacing ...

DN: 32 mm - 300 mm
Pressure: 10 bar - 16 bar
Temperature: -10 °C - 110 °C

97/23/EC directive N° 0035 - Risk category I-III / Module H GG25 body - Epoxy coated - ISO pad Max. pressure:16 bar up to DN300, 10 bar above Temperature range with EPDM seat: -10°C/+110°C (temporarely +130°C) Gearbox recommended above DN200

DN: 25 mm - 300 mm
Pressure: 2 bar - 8 bar
Temperature: -50 °C - 120 °C

... Butterfly Valve Air Operated For Marine Industry Structure - rack and pinion rotary actuator Surface Treatment - hard anodizing Low Temperature: -40ºC(-104°F) ~ 80ºC (+176°F). Connection - NAMUR, ISO5211, and ...

DN: 0.45 in - 1 in
Pressure: 16 bar
Temperature: -40 °C - 160 °C

The Siral BSD3000 is a double ball valve with by-pass, service and drain functions, intended for hot/cold water, steam and glycol (50% content). It is capable of withstanding a maximum pressure rating of PN16 at temperatures ...

DN: 40 mm - 600 mm
Pressure: 2.5, 6, 10, 16 bar
Temperature: 70 °C

... with rolled thread and bearing. Wedge with replaceable spindle nut. Drain plug - on request. Marine execution for seawater up tp 45 . All parts are protected against corrosion.

DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C

• wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 ...

The D671F(Full)-16c is a pneumatic all-lined single acting/double acting butterfly valve that has a nominal diameter of DN40-DN600. The disc and cast steel body have been made out of ductile cast iron and stainless steel. ...

DN: 40 mm - 1,200 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

... possible misalignment and reduces overall height. SIDE FLANGE: Connection compatibility design allows RBV010 Series Butterfly Valve to be installed between flanges of DIN PN 10/16, BS and ASME Class 150 simultaneously. Bi-Directional ...

Pressure: 225 psi - 400 psi
Temperature: -40 °F - 180 °F

The Cla-Val Model 100-29S Seawater Service Reduced Port Hytrol Valve is a hydraulically operated, diaphragm actuated, globe or angle pattern valve. It consists of three major components: ...

DN: 40 mm
Pressure: 10, 20 bar
Temperature: 50 °C

... pressure reducing function | manageable installation, easy-to-maintain owing to the clamp system | especially suitable for sea water