• supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power consumption 0,5W nominal output ...
HIQUEL
The KET-DDX-410, designed for the realisation of control systems used in building automation, is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity 12 A @ 250 VAC, ...
The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and ...
Data-Control PC
The 207-ADIO-KIT is an 8-channel Analog Input (AI), 2-channel Analog Output (AO), 8-channel Digital Input (DI) and 8-channel Digital Output (DO) slave module with the pluggable terminal block. With EtherCAT® control, it will lead to fast ...
Taiwan Pulse Motion
4 Analogue outputs module. Available in CANBUS or MODBUS RS485 versions. Device able to provide voltage, current signals and current loop, using four different and galvanic insulated channels and power lines. -Input Voltage: ...
Highlights • - Industrial Quality Bluetooth Solid State Relay Controller • - Available with 1, 2, 4, or 8 On-Board Relays • - Available with 20-Amp SPDT or 30-Amp SPST Relays • - ProXR Command Set Used by Industry for Many Years • ...
The module has a compact aluminium housing and offers the possibility of top hat rail mounting. The interfaces are quickly and conveniently available on the front panel. Using the 3-wire connection technology, all sensors can be ...
Sontheim Industrie Elektronik GmbH
The MxxxT Series Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive ...
King Pigeon Communication Co.,Limited
Our remote I/O expansion units communicate with Modbus TCP/RTU and IEC 61850 GOOSE, allowing to extend and distribute the acquisition and command capabilities of any master device. We offer flexible I/O board configurations to fulfill ...
【W-M1B103】8 Channels Analog Input (3 Types) Module (High Common Mode Voltage Protection) High Common Mode Voltage Protection 3-in-1 Analog Intput Voltage / Current / Thermocouple Input Impedance Voltage: 2 MΩ, Current: 120 Ω Communication ...
ADVANIO TECHNOLOGY Co., Ltd.
PAMIO 2ENC4A ■ 4 analog inputs ■ 4 analog outputs ■ 2 RMS inputs
Power Automation
Modbus TCP Ethernet Remote IO Module (2DI+2DO+2AI+RJ45+RS485) The M100T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit ...
King Pigeon Hi-Tech Co., Ltd.
The five communication ports in FBs-PLC can simultaneously connect to various intelligent peripherals with various interfaces such as USB, RS232, RS485, Ethernet, CANopen® and ZigBee™. Apart from the FATEK and Modbus protocol or communication ...
Protocol standardization, Easy integration, And maintenance cost savings. Modbus RTU and TCP/UDP protocols supported Built-in web server for web-based remotely I/O access Three control ports with Ethernet, USB and RS485/RS422 ...
LOW THERMAL SCANNER Automation of measurements using the 8500 Low Thermal Scanner allows a completely automated measurement system to be realised • 10 channels referenced to a single output on the rear of the unit • 4 terminal ...
The MR-AO4 module is developed to enhance the functions of connectivity, I/O and analysis of the device to which it�s connected. The MR-AO4 includes 4 opto-isolated multifunction analog outputs and each one can be used for generating ...
Contrel elettronica
The MR-AO8 module is developed to enhance the functions of connectivity, I/O and analysis of the device to which it�s connected. The MR-AO8 includes 8 opto-isolated multifunction analog outputs and each one can be used for generating ...
Contrel elettronica
The MR-DI16 module includes 16 isolated digital inputs. This module can also be connected to Contrel elettronica devices equipped with an RS485 communication interface where a greater number of inputs is required. It is possible to configure ...
Contrel elettronica
I/O modules extend the possibilities of a (main) controller. Often, including separate I/O modules reduces the costs of the overall system. We apply a wide range of standard interfaces in our I/O modules. With our experience, we will ...
6U COMPACT PCI I/O BOARD 16 COM PORTS CPC-16COM 6U standard CPCI bracket, 32bit, 33MHz CPCI bus, support hot-swappable 16*serial port RS-232/RS-422/RS-485 switched, speed up to 115200bps Front I/O 2*DB68 port, support 8*serial port; support ...
- 48 Digital Inputs - Isolated RS485 port and ModbusRTU protocol support. - Sequential 2,000 Event Memory. - 19″ 1U - Ability to work at different voltage levels. (24/48 and 110/220 Vdc) - Safe operation under electromagnetic noise. - ...
Intrinsically safe I/O module intended to control electrovalves. The electrovalves can be controlled in a twomode or smooth way (i.e. proportional control). I/O ports can be also applied as general-purpose binary interfaces. Communication ...
FAMUR
Thickness:20mm Description:Distributed I/O optical transmission - master module - Ethernet communication Application:Data transmission Series:88DMM2 Colour:black
RELIABILITY : The 8 INPUTS REMOTE MODULE (MI8) enables the simultaneous creation of : a D.R.N. radio network and a RS485 wire network EASE AND SPEED of deployment and implementation. Possibility of secured configuration via secured ...
Please specify:
Help us improve:
remaining