Serial I/O

PROFINET device, EtherNet/IP device or Modbus TCP slave Integrated Ethernet switch Supports 10 Mbps / 100 Mbps 2x M8, 4-pin, Ethernet fieldbus connection Glass fiber reinforced housing ...

Compact PLC in IP67 CODESYS V3 - with WebVisu License CODESYS PLC Runtime CODESYS WebVisu License CODESYS OPC-UA Server IoT gateway for Turck Cloud PROFINET Controller/Device EtherNet/IP Scanner/Device Modbus TCP Master/Slave Modbus ...

Media converter for Profibus-DP, Modbus RTU and byte-oriented serial data telegrams Automatic detection of the transmission rate Transmission length up to 2.5 km Wire-break monitoring Intrinsically ...

Banner’s DXMR90 Series Controllers consolidates data from multiple connections to provide local data processing as well as accessibility for host systems as a platform for the Industrial Internet of Things (IIoT). The DXMR90 controllers ...

Acquisition, isolator, transmitter with alarms -Installation on the machine or within a panel -It can be used individually or interconnected, with internal bus for power supply and RS 485 – Modbus serial communication ...

-Installation on the machine or within a panel -It can be used individually or interconnected, with internal bus for power supply and RS 485 – Modbus serial communication I/O module for data acquisition systems (DAS), PC-based ...

Two independent channels acquisition -Installation on the machine or within a panel -It can be used individually or interconnected, with internal bus for power supply and RS 485 – Modbus serial communication -I/O module ...

The CP-RIO6-A is a 4HP Rear I/O interface for a CP6002, CP6003, CP6004, CP6005, CP6006 & CP6016 Compact PCI card complying to Kontron\'s proprietary RTM pinout. This RTM unit will provide USB, Ethernet, serial,VGA, USB Flash, and SATA ...

4HP Rear I/O interface for a 6U CompactPCI CP6002, CP6003, CP6004, CP6005, CP6006 processor board Specifications Single slot (4HP) Header connectors for SATA, USB2.0, 2x Fans, 1xRS232, 1x RS422 2.5 inch SATA HDD/SSD ...

Rear Transition Module for PICMG2.16 Switches CP6923, CP6924, CP6925, CP6940. Two versions are available: A 4HP version providing 12x RJ45 GbE channels, and a 8HP version, providing 24x RJ45 GbE channels. Both offer a serial management ...

IO module for evaluating digital sensors and controlling actuators Output of system information of ETC5000 SIKONETZ5 interface 8 digital inputs 8 digital outputs Easy mounting (top-hat rail)

PSSu, electronic module, failsafe, counter, 1 input, absolute encoder SSI encoder, differential signal RS422, resolution 32 Bit, 7 transmission rates, 62.6 - 1500 kHz, for increased environmentalrequirements. General data Approval - ...

PSSu, electronic module, failsafe, counter, 2 operating modes, configurable, 1 input, incremental encoder, differential signal RS422, resolution 32 Bit, for increased environmental requirements. General data Approval - CE UKCA cULus ...

- Channels: Six differential, two single-ended - Input type: mV, V, mA - Sampling rate: 10 samples/sec. (total) The ADAM-4017 is a 16-bit, 8-channel analog input module that provides programmable input ranges on all channels. ...

- 12-bit resolution - Software configurable for mA or V output in individual channels - 4 digital inputs for latch output - 3000 VDC D/A to Logic isolation - Programmable output slope: 0.125 - 128.0 mA/sec. 0.0625 - ...

- 16 digital input channels - Digital input for dry contact or wet contact - Input Voltage level: 10~50V - Over voltage protection: 70 Vdc - 2,500 Vdc optical isolation The ADAM-4051 is a 16-ch. Digital Input Module, ...

ZE-2AI is an I/O module with 2 analog inputs for slave communication over Modbus TCP-IP (Ethernet) and Modbus RTU. The module has server functionality for the 100 Mbit/s Ethernet communication port with Modbus TCP-IP protocol and can ...

Z-4DI-2AI-2DO is a I/O module with 4 digital inputs, 2 analog inputs, 2 relay outputs, slave for Modbus RTU, on two RS485 serial ports. The module allows the possibility to set the parameters via USB (Easy setup software) an registers ...

Z-DAQ-PID has a universal analog input (mA, V, PT100, TC, Ohm) and an active output 4..20 mA or 0..20 mA for continuos or PWM (pulse-width modulation) loop control. This functionality can be disabled and the unit can be used as analog ...

Pluggable I/O Module for FP2 and FP4 Series Features Power from HMI Nominal Input Voltage 24VDC Nominal Output Voltage (PNP) 24VDC) Nominal Output Current 250mA @ 24VDC for PNP, 2A @ 230VAC & 24VDC for Relay ...

Pluggable I/O Module for FP2 and FP4 Series Features Power from HMI Nominal Input Voltage 24VDC Nominal Output Voltage (PNP) 24VDC) Nominal Output Current 250mA @ 24VDC for PNP Max. O/P frequency 1kHz ...

Low cost compact Digital I/O modules with DIN rail mounting 2 wire RS 485 port provided on the pluggable terminal block User-definable Address, Baud rate and Parity through DIP Switch High-Speed Modbus RTU (Slave) communication ...

SmartMod I/O is an RTU/Modbus based I/O solution for OCS -Connects via 2-wire RS-485 Modbus/RTU -A total of 31 SmartMod I/O modules may be daisy chained on a single RS-485 link -DIN rail mountable -Optical Isolation ...

SmartMod+ expandable I/O supporting Modbus RTU communication protocols. -Connects via RS-485 Modbus/RTU to any X-Series OCS -Dip-switches allow for easier configuration -DIN rail mountable -Optical Isolation ...

4-input impulse centralising equipment. Inputs are optoisolated to read impulses and it has a 32-bit memory to store the values metered. - It has an RS-485 communications port that can be used with an RS-232 or Ethernet converter ...

ODOT B series integrated I/O module consists of communication board (COMM board) module and extended IO module. The COMM board could select the corresponding bus module according to the communication interface of the controller system. ...

Product Feature: Flexible protocol module and I/O module plug and play, features as below: 1. designed with a max of 64 modules, each I/O module is built with 16 channels and each have LED indicator. 2.supports an overall of 1024 I/O ...

CT-121F：16 channel digital input/24VDC/ Sink type Module features ◆ the module supports 16 channels digital input, supports sink input， and the input voltage is 24VDC and the input high level is valid. ◆ the module can collect digital ...

Multi I/O is a communications card that helps integrate a control and monitoring system using fully-configurable input and output relay signals. Enables connection of 2 devices to a single UPS communications port. Designed for applications ...

DigiRail NXprog gathers the best of both, easy programming of Arduino community and industrial device reliability and robustness for automation applications. Its integrated I/O handles analog and digital signals, allowing DigiRail NXprog ...

DigiRail Connect is a versatile I/O module to be used as an extension of any brand automation system. Its rich mixed inputs and outputs offer industrial standard analog and digital signaling. The available DigiRail Connect options ensure ...

binary outputs module open collector type outputs LEDs for module operation and Modbus transmission signalling The SOC-8 binary outputs module is used to control the low-power output devices via the RS-485 connection. ...

analogue inputs module 8 independent analogue inputs (voltage or current) RS-485 / Modbus RTU LEDs for module operation and Modbus transmission signalling Module SIAi-8 allows to measure analog values from 8 current ...

multi counters module LEDs for module operation and Modbus transmission signalling Multi counters module SLI-8 allows to counting of pulses delivered to 8 isolated binary inputs independently. All counters are 24 bit long and can ...

The MV110 DI Series by akYtec is a comprehensive collection of digital input modules engineered for seamless integration into decentralized automation systems. These modules are ideal for both retrofitting existing systems and deploying ...

The MV110 AI Series by akYtec offers a comprehensive lineup of analog input modules specifically designed for decentralized automation systems. These modules are adept at facilitating reliable communication through the Modbus RTU/ASCII ...

The MU110 DO Series by akYtec features a selection of digital output modules, each engineered to enhance decentralized automation systems. These modules leverage the robust Modbus RTU/ASCII protocol and RS485 interface for reliable communication, ...

measuring half and full bridge, IEPE-sensor, voltage, current, quarter bridge with completion terminal 1 Analog output channel voltage (±10 V) or current (0 to 20 mA), 100 kHz update rate High-accuracy digitization 19-bit SAR ADC ...

The programmable I/O modules of the Saia PCD1 E-Line series with Saia PG5® enable the autonomous and safe operation of the modules even if communication to the master station is interrupted. The local function of a room, for example, ...