Serial I/O modules

Brand: GCAN Model: GC-1008~GC-8012 Application: Input and output modules Type - Characteristic - Signal - Channel Digital input - GC-1008 - Digital input (PNP) - 24V DC - 8-channel GC-1018 - Digital input (NPN) - 24V DC - 8-channel GC-1502 ...

Operating Temperature Range –20~70°C 8 channel analog input (0~5v or 0~20mA) , 12 bit 8-point isolated digit input 5-48 VDC(with SOE), or 8-point single channel counters up to 1 KHz 8-point relay output, 250VAC 5A per point ...

-8 Optically-Isolated, Non-Polarized Digital Inputs with Change-of-State Detection -8 Form C SPDT Electromechanical Relays Can Switch Up to 1 Amp Each -Relays Can be Configured for Level or Pulse Modes -Microcontroller ...

Key Highlights & Features •8 I/O Module •AC Power supply •Analogue Output Module •Physical Hardware Seal •RS232/RS232 Module •RS485/RS485 Module •Stainless Steel Dust Cover The C500 Series flexibility is provided through its ...

8 digital inputs / 8 digital outputs DESCRIPTION : These modules are used with HMI, PLC or SCADA via Modbus RTU protocol. IO Studio is its PC software for setting communication. Data Acquisition Studio is its PC software for DAQ purpose. As ...

The EMX-ESG614 provides 6 RS-232/422/485 ports based on the SMSC SCH3116 industrial temperature UART in the efficient EMX I/O form factor. Ports 1 - 4 support RS-232, RS-422, and RS-485 protocols, while ports 5 and 6 support RS-232 or ...

Universal, programmable I/O device server Barionet 1100 is the newest fully programmable I/O device server of Barix, based on Linux/Lede/OpenWRT. The device features a wide range of interfaces such as two USB, WiFi, serial ports, analog ...

Basis-module for several fieldbus systems Connectable to RS232, RS485, Profibus DP via exchangeable plug-in card 8 inputs, 8 outputs Transistor or relay outputs

I/O acquisition modules with 4 inputs / outputs: NXT-A4 Remote I/O acquisition modules compatible with ModBus RTU (RS485) and ModBus TCP (Ethernet) protocols. Versatile IO analog module equipped with ModBus and CANBus NXT-A4 ...

• Supports Class A and Class B connections • Supports Built-in Isolator • Ensures a reliable and logic data transmission via Ring and Bus topologies. • Uses RS485 serial communication and data transmission speed is • 230.400bps • ...

The AMRIO series input/output extension modules are used to easily extend I/O signals of control systems. Modules from this series feature both ARION and MODBUS RTU communication protocols – the selection of the required protocol is done ...

Power Supply - 24 VDC Permissible Range - 20.4 - 27.6 VDC Power Consumption - 3W Dijital Inputs Nominal Input Voltage - 24 VDC Input Voltage - For Logic 0 - For Logic 1 10 VDC Input Current - 6mA max. Input Impedance - ...

Multi-Function I/O Module ● 4 Channels Analog input ● 2 Channels Analog output ● 4 Channels Digital input ● 4 Channels Digital output ● All Digital input channels can be used as 32 bit counters ● Support over voltage protection ● ...

The SNAP-PAC-RCK4 mounts one SNAP PAC brain or on-the-rack controller and up to 4 analog, digital, serial, and special-purpose SNAP I/O modules. The SNAP-PAC-RCK4 can be DIN-rail or panel mounted. This rack works with all SNAP I/O ...

The PLC TPLC050 has a modular and flexible structure based on ARM9. The inputs and outputs of the TPLC050 are expandable by adding Mect MPNC030 and MPNC035 series modules for analog signals and MPNC020 for digital signals. The analog ...

• supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power consumption 0,5W nominal output ...

The KET-DDX-410, designed for the realisation of control systems used in building automation, is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity 12 A @ 250 VAC, ...

The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and ...

The 207-ADIO-KIT is an 8-channel Analog Input (AI), 2-channel Analog Output (AO), 8-channel Digital Input (DI) and 8-channel Digital Output (DO) slave module with the pluggable terminal block. With EtherCAT® control, it will lead to fast ...

The module has a compact aluminium housing and offers the possibility of top hat rail mounting. The interfaces are quickly and con­ve­nien­tly avail­able on the front panel. Using the 3-wire con­nec­tion technology, all sensors can be ...

The MxxxT Series Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive ...

Our remote I/O expansion units communicate with Modbus TCP/RTU and IEC 61850 GOOSE, allowing to extend and distribute the acquisition and command capabilities of any master device. We offer flexible I/O board configurations to fulfill ...

W-M1B502 | 16-Ch Digital Input / 8-Ch Relay Output Module 16-Ch Digital Input / 8-Ch Relay Output Dry / Wet Contact Input Resistance 10KΩ Over-Voltage Protection 70 VDC Relay Output Channel 4 Form A,4 Form C Contact Rating 5A ...

PAMIO 2ENC4A ■ 4 analog inputs ■ 4 analog outputs ■ 2 RMS inputs

Modbus TCP Ethernet Remote IO Module (2DI+2DO+2AI+RJ45+RS485) The M100T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit ...