Shut-off valves

Temperature: -40 °C - 120 °C

Features Bi-directional flow Mounting pad for easy installation Extended copper tails Indicator on stem shows valve position – open or closed Fully opened or closed with a quarter turn of the valve stem ...

Pressure: 80 psi

The CAM300 is a single air acting, diaphragm dispense valve with spring closure to manually apply a variety of fluids. A wand style handle allows precise control over the start / stop of fluid flow and easy manipulation to dispense fluids ...

DN: 0.125 in
Pressure: 0 bar - 400 bar

Mini Needle Valve, Tradinco T1700 Special instrumentation-needle valve for vacuum and pneumatic pressures up to 400 bar. Excellent feel and low torque allows high accurate control of vacuum or pressure. Low cost Durable Low torque Soft ...

DN: 65 mm - 200 mm
Pressure: 10 bar - 160 bar
Temperature: 550 °C

Version Straight bonnet Cast steel body and bonnet Shut-off disc, Fig.No. 200 AE Throttle disc, Fig.No. 200 BE Outside screw and yoke Position indicator if required Turning and rising stem Pressure and temperature ratings Pressure ...

The TS5624 Disposable Diaphragm Valve features a “first to market” Disposable Material Path. Difficult fluids such as CA’s and pre-mixed 2-part epoxies, can now be dispensed without the need of frequent cleaning, by simply replacing the ...

DN: 50 mm - 2,000 mm

Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. USE This knife gate valve is appropriate for liquids with a solids ...

DN: 0.25 in - 4 in
Pressure: 10,000 psi
Temperature: -54 °C - 538 °C

The 6MN is a range of lightweight Monoflange isolation valves that are ideally suited to a wide range of instrumentation applications via standard flanged pressure take-off points. The compact design incorporates the Isolation valve ...

DN: 2.5 in - 16 in

Glens Falls, NY- Danfoss Flomatic Corporation has introduced their new AWWA C515 Gate Valves. These new gate valves feature three different connection types such as push-on, flange x flange, and mechanical joint. The ...

DN: 0.125, 0.25, 0.5, 0.75 in
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 225 °F

Humphrey offers you a variety of air piloted valves within the unique construction of the classic Diaphragm-Poppet Series. Choose diaphragm-poppet valves for your difficult, critical applications when reliability and tight sealing are ...

DN: 0.375 in - 2 in
Pressure: 150 psi
Temperature: 70 °F

All model 83 open/close electrically actuated ball valves sizes 3/8″ thru 2″ have direct mounted unidirectional 90º turn actuators (115 Vac & 220 Vac, 12/24 AC & DC are reversing). The actuators are weatherproof (NEMA 4X), have a green ...

Feeding and metering slide gate series is specifically designed for gravity-flow applications. The variable slide gate actuation setting enables fractional material flow and full-open or closed formats. It is constructed with carbon steel-infused ...

DN: 0.25 in - 4 in

Kingston ball valve (Series KV20) available in sizes from 1/4" to 4" with a stainless steel body and quarter turn on/off design. High quality ball valves sold exclusively by Valtorc. Series KSV20 (3PC Stainless Steel Valve Body) Kingston ...

DN: 2.5 mm

Smooth operating spindle made of PTFE, valve bore: 0-2,5 mm, with retaining device to avoid complete unscrewing, screw cap and retaining device made of PP, operating temperature: -20 to +150 °C, made of DURAN® tubing, pack: 1 pc.,Cat. No.: 2 2700 02

DN: 25 mm - 500 mm
Pressure: 1.6 bar - 16 bar
Temperature: -46 °C - 650 °C

R4 series of eccentric rotary valve, features wide range of applicability, good shut-off capability, high efficiency, large capacity and regulating ratio. Typical application: gas, steam, liquid and slurry service. The actuator ...

DN: 25 mm - 100 mm
Temperature: -10 °C - 120 °C

SS304 / SS316L Sanitary Stainless Steel Pneumatic Stop Reversing Valve Sanitary flow diversion Seat valves are used to change the flow direction of pipeline.There are lots of different valve body combinations to meet different applications Product ...

Our Actuator and On/Off Valve Assemblies are used day-in and day-out in the most robust production environments. Fast cycling robots, high pressure up to 94k, high-speed/low-pressure (8,000 psi) insulation cutters, slow cutting of hundreds ...

Pressure: 2,000,000 Pa - 30,000,000 Pa
Temperature: 0 °C - 70 °C

The stop valve is operated by a manual operation lever. disconnected closed hydraulic circuit holds pressure at the secondary side. Multiple work pieces can be loaded and loaded by preventing the work piece fall by during the clamping・unclamping ...

Pressure: 500 bar
Flow rate: 15 l/min

Check valves, hydraulically pilot operated These hydraulic check valves are part of the shut-off valves according to DIN ISO 1219. With a hydraulic inlet in the connection Z the blocked flow A→B can be opened. The flow B→A is permanently ...

DN: 2, 1.5, 1.25, 1 in

BEULCO gate valves enable safe shut-off of parts of the pipeline network or a system. The slides are designed so that spindle overruns and spindle breaks are not possible. The gate valve is equipped with connectors on both sides. The ...

CPS013 CPVC STOP VALVE TYPE II FACTORY PIPE-WORKSHOP FITTING WORKSHOP MOULDS WAREHOUSE MATERIAL PREPARE MATERIAL TESTING PRESSURE TESTING FOR VALVES PACKING LINE WAREHOUSE LOGISTICS SAMPLE DISPLAY SHOWROOM

DN: 20 mm - 200 mm
Pressure: 50, 20 bar
Temperature: -50 °C - 427 °C

Ratings & Connections Flanged: ANSI 150 – 2500, UNI-DIN 10 - 400 Welded: BW or SW Actuators model 87/88 multi-spring diaphragm; cylinder Trim single seat plug top guided; Lo-dB and anti-cavitation trims, single or double ...