Shut-off valves

The PP34070 is a ball valve compression device manufactured by FGS Brasil. It is offered in 3 variants, the PPR407020, PPR407025 and the PPR3407032 with the dimensions and weighs 20mm x 20mm, 160g, 25mm x 25mm, 190g and 32mm x 32mm, 250g. ...

DN: 15 mm - 50 mm
Pressure: 20, 50, 100 bar
Temperature: -29 °C - 425 °C

high tightness (leakprooftightness class A according to EN – 12266 – 1) environment friendly tests according to API 598 or EN 12266-1 installation length according to DIN 3202 for classes according to ANSI B16.10 ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C

The KVF-Type is part of the KÜHME High-Performance Class. KVF-Valves are especially designed for immediate and premium tight shut-off of any type of gaseous fuel flow. This electro pneumatic globe valve is setting a new industrial standard ...

The Stanelle Butterfly Valves: simple, rugged components for a wide variety of application conditions. Everywhere where flexible connection is required. A rubber or a cloth collar (or the like) carries over the connection to the flow-operated ...

Description The valve closes drip tight when the flow rate exceeds the normal value (due to pipe rupture). The valve will manually re-set open after fixing the break. Features - Hydraulic burst protection. No electronic controllers ...

Type: Plug valves Material: steel Description: Dimensions: DN10 to DN50 Pressure range : PN315 - PN350 Field of application : Service shut-off valve located in control valve circuits, used at steel mills, steelcasting, floodgates ...

Pressure: 0 bar - 320 bar

The UOPF1 type is a pressure gauge isolator valve engineered by Ponar Wadowice. It is designed for calculating pressure in a single point, by means of one pressure indicator. In addition, it is also used to detach the pressure scale from ...

Pressure: 200 bar
Temperature: -20 °C - 65 °C

Key advantages - High pressure brass cylinder valve for oxygen and oxygen mixtures (>20% O2) service - Permanent gas tight seal - Specific filling adaptor required - Residual pressure valve inline execution - π marking according TPED ...

DN: 10 mm - 150 mm
Pressure: 160 bar - 250 bar
Temperature: 350 °C

– shut-off globe valve with bellows (A10) and regulating globe valve with bellows (A11 rough – regulation) – forged body (lifetime up to 60 years) – non-cobalt overlay – threaded yoke – multi-layer bellows with long lifetime (up to ...

DN: 50 mm - 1,400 mm
Temperature: -196 °C - 593 °C

Product type On/Off Type Product description Top-entry Ball Valve Model SQ*47F/H Size NPS 2～NPS 56

Pressure: 150,000 Pa - 1,000,000 Pa

Range of Application DThis product is installed at the bottom of water cup for auto dischargers, air filters and air filter regulators and can auto discharge the condense water gathered in the water cup. Feature Auto draimer Manual ...

DN: 3 in

The OPW 6500 series angle loading valve, made in cast aluminum, allows fluid to be held in the line out to the end of the loading arm. The aluminum body is constructed with stainless steel trim for a range of fluid handling capabilities. ...

DN: 50 mm - 1,250 mm

Tender specification PVC HOKA PVC damper valve with hand lever with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. as damper valve for adjusting volumetric flow rates Socket ...

DN: 25 cm - 100 cm
Pressure: 16, 40 bar
Temperature: -29 °C - 180 °C

The KTN 121LT is our 3-way, full bore, DIN flanged ball valve. The range comprises from DN 25 to DN 100, varying its floating valve design from DN 65 where the sphere is guided for better performance, suitable for conducting aqueous media, ...

DN: 100 mm - 3,500 mm
Pressure: 10 bar - 50 bar

Valves for maintenance or safety purposes, they are engineered and customized to the special needs of hydroelectric power plants. Used as isolation device, they provide tight shut-off when closed and little pressure loss when open. Relatively ...

DN: 50 mm - 1,400 mm
Pressure: 2 bar - 10 bar
Temperature: 120 °C

double-sided sealing with continuous valve plate and smooth dead zone-free flow ensures unobstructed closing with densities <5% and media containing solids also available with various seal types and surface treating of the wearing ...

Pressure: 10 bar
Temperature: -20 °C - 150 °C

Aseptomag® double-chamber valves AXV are used for the mixproof shut-off of incompatible products at pipe junctions in aseptic processing plants. Welded stainless steel bellows are used to hermetically seal the product area from outside ...

DN: 0.5 in - 3 in
Pressure: 200 psi
Temperature: -50 °F - 400 °F

TECVAL Tank Blanketing Valves are designed to reduce gas losses on low pressure storage tanks. Devices are manufactured in stainless or carbon steel, sizes from ½” to 3” in flanged or threaded end types. Standard operating pressure 200psi ...

DN: 0.5 in
Pressure: 60 bar
Temperature: -20 °C - 180 °C

Valve specially designed to connect the gauge to one end and the other end to the process, with special housing for the seal. It is not necessary to use any type of hemp or PTFE, etc, which can become introduced in the interior, blocking ...

DN: 655 mm
Pressure: 1.2 bar
Temperature: 50 °C - 120 °C

HTC vacuum pendulum valve is to install a large throttle valve between the process vacuum chamber and the turbine molecular pump inlet. The current pendulum valve design are constructed of Nickel plating or hard anodized stainless steel ...

DN: 0.063 in - 0.5 in

Stopcock Valves are precision machined devices that function in much the same way as a ball valve. When the handle points in the direction of flow, the valve is fully open; when the handle points perpendicular to the direction of flow, ...

DN: 0.25 in
Pressure: 1.4 bar - 7 bar
Temperature: -20 °C - 70 °C

Lock Up Valve, YT-405 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting level to avoid system shutdown or damages to pipelines. - Due to its compact size and light weight, lock up valve ...

DN: 80 mm - 3,600 mm
Pressure: 75 psi - 250 psi
Temperature: 143 °C

Design Features:DeZURIK AWWA Butterfly Valves meet the requirements of AWWA C504 and C516 standards. They are used for shutoff on clean water and gases. Offset disc design, corrosion resistant shaft, stainless steel disc edge, and self-compensating ...

DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -60 °C - 200 °C

One piece ball/stem full bore system for superior performance Lining options for abrasive applications PVDF and UHMW-PE Maintenance-free and adjustable gas-tight stuffing box packing Face to face dimensions - DIN EN ...