Shut-off valves

Do you need help making a decision?  Take a look at our buying guide
330 companies | 1,502 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
Search
Shut-off valves | Choosing the right valve
There are different types of valves that will be more or less adapted to your needs. If you want to stop the circulation of a fluid, we suggest you choose a shut-off valve like a ball valve, a knife gate valve or a gate valve. If you want to control the flow rate of a fluid, it would be better to choose a control valve like a needle valve, a  globe valve, a piston valve or a butterfly valve, which all provide good throttling. The choice of a valve also...
needle valve
needle valve

DN: 1, 0.75, 0.5, 0.25, 0.375 in
Temperature: 0 °C - 100 °C

BUENO's PTFE Needle valve is Designed with simplicity and easy of installation. Excellent chemical resistance Ideal for use with instrumentation fitting as a sample valve Wide range of operation temperature: 32°~212°F ...

ball valve
ball valve

Ball Valves Ball Valves with unresticted flow Ball valves or nickel-lated brass with a chomium-plated ball. Seals fo Teflon (PTFE and NBR). Metal lever (alu alloy). Straight-through opening same as port size. Compact Ball Valves Ball ...

ball valve
ball valve
FULL-SFER 4291

DN: 20, 15 mm
Pressure: 16 bar
Temperature: -20 °C - 90 °C

Built-in valve, F/F threaded, with stop cock, with protection cover.

gate valve
gate valve
TPVXX

DN: 50 mm - 305 mm
Temperature: 350 °C

The Titan Pressure Valve's unique "rising blade" is designed to close into an end seat. This provides an optimal seal of high pressures and a positive material shut-off. ‍ Ideal application: Higher-temperature and/or higher-pressure ...

See the other products
Vortex Global
butterfly valve
butterfly valve
B

DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar

Inexpensive shut-off fitting in the hygienic product and CIP section Solidly designed valve disk Safe guidance of the disk thanks to bushes in the housing Seal with a small volume and extension gaps for compensating temperature ...

See the other products
Evoguard GmbH
gate valve
gate valve
MXT-1850143 series

DN: 50 mm - 300 mm
Pressure: 20 bar
Temperature: -29 °C - 425 °C

97/23/EC directive N°0036 - Risk category III / module H - A216 WCB cast steel body & bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI ...

See the other products
MerxTrade BV
butterfly valve
butterfly valve

DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C

304 SS Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical / pharmaceutical industry • Chemical waste burning ...

See the other products
pneumaticairactuator.com
sliding gate valve
sliding gate valve
6.81 series

DN: 0.5 in - 4 in

- PVC-U = Unplasticised Polyvinylchloride Gaskets - EPDM Manufacture - Injection moulded

globe valve
globe valve
ECT

DN: 0.375 in - 2.5 in
Pressure: -0.9 bar - 16 bar
Temperature: -20 °C - 80 °C

FARBO, ever following the best performances, renews a new pneumatic globe valves series. Cheaper and compact, they allow to reduce encumbrances and costs. Available with brass body, as standard they are supplied with gasket with wiper ...

See the other products
Farbo
ball valve
ball valve
340 series

DN: 0.25 in - 4 in
Pressure: 40, 25 bar
Temperature: -10 °C - 150 °C

Full bore brass ball valve Diameters from DN008 - ¼" to DN100 - 4" Threaded F/F (ISO 228/1) Design according to MSS-SP-110 Air testing according to EN12266-1 Blow-out proof stem, adjustable packing With handle or butterfly (up to ...

See the other products
VIR
ball valve
ball valve

DN: 0.5 in - 40 in

High Temperature Trunnion Ball Valve Fabricator: Metal-Seated Trunnion Mounted Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. High Temperature Trunnion Ball Valve Cast Steel Trunnion Mounted Ball ...

See the other products
China MED Valve Co., Ltd.
globe valve
globe valve
460 P

DN: 6 mm - 50 mm

floating ball valve
floating ball valve

DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C

Design Standard Based on API 6D and Customer requirements Pressure Rating ASME 150 - ASME 2500 End Connections As per API 6D standard 1) Anti-fire safe design: API 6FA, API607 2) Anti-static device The static-conduction ...

See the other products
wenzhou domos fluid equipment co.,ltd
two-handed valve
two-handed valve
BSD3000

DN: 0.45 in - 1 in
Pressure: 16 bar
Temperature: -40 °C - 160 °C

The Siral BSD3000 is a double ball valve with by-pass, service and drain functions, intended for hot/cold water, steam and glycol (50% content). It is capable of withstanding a maximum pressure rating of PN16 at temperatures from -40 ...

piston valve
piston valve
90 series

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 440 bar
Temperature: -29 °C - 38 °C

Our Pressure Gauge series valves are flow regulation valves that isolate pressure gauges, purges, pressure switches and other instrumentation devices. They allow flow to enter the instrument without damaging it smoothly. If they have ...

See the other products
Redfluid SL
butterfly valve
butterfly valve
BR 10a

DN: 4 mm - 32 mm
Temperature: -50 °C - 200 °C

Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE SIZE NPS 4 to NPS 32 PRESSURE RATING Class ...

See the other products
Pfeiffer Chemie-Armaturenbau GmbH
butterfly valve
butterfly valve
AK/DVGW-SSK

DN: 50 mm - 400 mm
Pressure: 10 bar
Temperature: 60 °C

One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For ...

See the other products
Herberholz GmbH
sliding gate valve
sliding gate valve
FS140

DN: 200 mm - 900 mm
Temperature: 250, 400, 800 °C

Discharge and dosing of free flowing bulk material. Product inquiry Dimensional sheet MATERIAL HOUSING :Structural steel, heat-resistant steel, stainless steelMATERIAL SLIDING PLATE :Structural steel, heat-resistant steel, stainless ...

See the other products
Jaudt Dosiertechnik Maschinenfabrik GmbH
globe valve
globe valve
J41W series

DN: 15 mm - 600 mm
Pressure: 1.6, 2.5, 4, 6.4 MPa
Temperature: 200 °C

Stainless steel globe valve series products are mainly used to cut off (or connect) the pipeline medium. It is suitable for nitric acid, acetic acid and other occasions in chemical industry and other industries. This series of products ...

See the other products
ChinaTanggong Valve Co., Ltd.
conical plug valve
conical plug valve
Lift Plug Valve / SwitchPlug

DN: 1 in - 36 in
Pressure: 16 bar - 250 bar
Temperature: 0 °C - 1,200 °C

The SwitchPlug valve consists of a triple or four-way valve along with an insert underneath and dual or triple outlets in T or Y versions. These valves are mostly preferred for usage in chemical and refining plants to alternate between ...

angle seat valve
angle seat valve
R2SI NC

DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C

Functioning Body material Stainless Steel CF8M (Aisi 316) ACTUATOR Stainless Steel CF8 (Aisi 304) Pipe Size G1/2” – G3/4″ – G1″ – G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE SIZE ACTUATOR G1/8″ Options 3/2 Command Pilot Visual Positioning ...

plug valve
plug valve

DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi

Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection of suitable grease. Thanks to the absence of ...

See the other products
Galli & Cassina S.p.A.
plug valve
plug valve
INNOVA N

DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 140 °C

The INNOVA N-Type valve is a pneumatic shut-off seat valve for hygienic applications. The valve is authorized to carry 3-A symbol. Note: Consult the options of the valves authorized to carry 3-A symbol. Hygienic design according ...

See the other products
INOXPA
globe valve
globe valve
AV01

DN: 25 mm
Pressure: 16 bar
Temperature: 0 °C - 300 °C

Flange-Globe valve DN 25 in straight through with bellow flange acc. DIN EN 1092 material grey cast iron DN-JL1040 with Isolation plug seal: - metal design: - straight through with bellow body material: - grey cast iron DN-JL1040 material ...

See the other products
NieRuf Gmbh
butterfly valve
butterfly valve
BV10 Series

DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C

• wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 series 20, ISO ...

exhibit your products

& reach your clients in one place, all year round

Exhibit with us