... and single-ended sensor signals Selectable adaptation to voltage or current signals Flexible pin assignment due to signal path multiplexers Sine/Cosine signal conditioning ...
iC-Haus
... well proven Vallen AE Signal Conditioner (ASCO-P). Connected to a PC using the standard USB 2.0 interface the 4-channel data acquisition module samples APK (Acoustic Peak Amplitude), ASL (timely average ...
The TMI is a fi ber optic signal conditioner especially designed to work with FISO s temperature sensors. It is a general-purpose instrument ideally suited to perform multi-point temperature measurements ...
FISO Technologies
Single channel - signal conditioner for AC - LVDT displacement sensors with minimal dimensions of only 25x25x9 mm for direct mounting on PCB`s. The device simultaneously generates the excitation voltage ...
inelta Sensorsysteme
... use Phonoptics fiber optic sensors, it is necessary to use electronics providing the optical signal and its analysis. This Myotis1300 version also allows signal amplification with a gain on 3 levels, ...
Phonoptics
CDV-900A is a general signal conditioner with constant voltage type bridge excitation. It has high frequency response range from DC to 500 kHz, and excellent nonlinearity within ±0.01%FS. Simple setting ...
Kyowa Electronic Instruments Co.
Premium, Field Configurable Vibration & Temperature Signal Conditioners Temperature Range: -40 to 185°F (-40 to 85°C) Maximum Load Resistance: 600 ohms Humidity Range: 0-95% Relative, Non-Condensing Connectors: ...
Connection Technology Center Inc.
The 4010, manufactured by Dytran is a signal conditioner controlled by a microprocessor. Its 3-channel DC signal conditioner amplifier is used together with a bridge-type ...
EM-M11A is a multiscale conditioner and isolator module for the commonly used signals in automation. The range setting is easily done with DIP-switches and signal frequency limit can ...
Electromen
... and SD-Cardslot this OEM device which is individually expandable. The FOTEMP1-OEM-MNT, Single-channel-OEM miniature signal conditioner can be controlled directly using the FOTEMPAssistent“ software. ...
10-28 VDC Power (2.5W) User Selectable analog output + 10V, +5V or 4-2 0mA Small size NEMA 4X enclosure DE to 100Hz Ideal for battery powered applications including in-vehicle. 10-28V supply and user selectable +/-10V, ...
... incrementally at lower cost. Provides 4-20 mA output proportional to shaft radial vibration. Dynamic signal is available at the signal conditioner or remotely
Metrix Instrument Co.
APPLICATIONS Conditioning of any kind of analog signal coming from a sensor to fit with data acquisition systems or Programmable Logic Controller (PLC) Electrical and physical measurement: strength, torque, pressure, ...
CELIANS
Signal conditioners protect signal transfer between field devices in safe areas and control systems by galvanic isolation of the loop. Particularly in case of long transmission paths, ...
... the signal conditioner line. The SC-System offers powerful modules for analog and digital measuring signals – from the isolating amplifier to the highly functional temperature converter ...
... zone 2 SIL 2 Country of origin - DE Weight - 115 g Technical Data Signal type - Analog output (HART transparent) Device type - Analog signal isolator - Output field ...
... .0-9.9 second) ●Target Reached Confirm (enable / disable) ●Brake Signal Hold Time (start off / next start off) ●External Start Input Control ●External Reverse Input Control ●Signal output (Start,Stop,Reverse)
Connection box for low level signals CMLIB A is used for connecting the low level signal outputs of a CMC for measurement or controlling purposes. It can also be used to connect the inputs of a CMS ...
Compass SC1 & SCD1 - NEW "All-in-One" Signal Conditioner Solartron’s new signal conditioner accepts any standard LVDT or Half bridge analogue probes with 5 Pin DIN connectors. ...
Compass SC1 & SCD1 - NEW "All-in-One" Signal Conditioner Solartron’s new signal conditioner accepts any standard LVDT or Half bridge analogue probes with 5 Pin DIN connectors. ...
Red Lion's IAMA0001 universal signal conditioner and isolator features an ultra-slim, small form factor design, ideal for a variety of industrial applications. With its .244" (6 mm) overall width, this ...
Red Lion Controls
The MTL1000 range of signal conditioning isolators and accessories are designed to help protect field instruments and control systems to provide safe, reliable and high-quality process communications. This cost-effective ...
Dataforth's new SensorLex® 8B line of isolated analog signal conditioners provides 19 family groups with over 130 different models that interface to a wide variety of voltage, current, temperature, position, ...
Dataforth Corporation
... circuits provide signal input and excitation protection against accidental connection of power-line voltages up to 240VAC and against transient events as defined by ANSI/IEEE C37.90.1. Protection circuits are also present ...
Dataforth Corporation
... circuits provide signal input and excitation protection against accidental connection of power-line voltages up to 240VAC and against transient events as defined by ANSI/IEEE C37.90.1. Protection circuits are also present ...
Dataforth Corporation
The model 84828 Slimline Signal Conditioning Card is compact, analog signal conditioner for use with all Jewell Instruments miniature tilt sensors. Each 84828 card operates one single ...
Jewell Instruments
... response to produce a high‐level DC output signal. Output is ±8 VDC single‐ended (±16 VDC differential). Units conveniently come with two switchable gain and filter settings (high/low; on/off) for added signal processing ...
Jewell Instruments
Tulip SC is a 4-20mA signal conditioner for use with all of our Miniature Tilt Sensors. It operates one tilt channel and also measures temperature using a 2500 Ohm resistor. Tulip SC is current loop powered, ...
Jewell Instruments
The PMX-24 converts potentiometric sensor signals into a proportional analogue output size. Special features such as the galvanic isolation, the integrated cable break detection, or the configurable outputs guarantee ...
• Power on indicators. • Low pass / Highpass Filters available. • 9 – 30 V DC power input – ideal for +24 V DC output, compatible with all DJB Accelerometers and those of other manufacturers. • DIN Rail Mounting for applications requiring ...
DJB Instruments UK Ltd
... Measurement Seismic Vibration Measurement Safety monitoring The VB range are low cost, battery powered, single channel IEPE signal conditioning units. Using BNC input and output they provide LED indicators for power, ...
DJB Instruments UK Ltd
... Vibration Measurement Seismic Vibration Measurement Crash Testing Auto/Aero Structural Body Surveys The DCM-03 MEMS DC signal conditioner is for use with DJB’s range of AM, AMB and AMT variable ...
DJB Instruments UK Ltd
ELECTRONIC DISCRIMINATOR FOR ENCODERS • A/B signal discriminator • Opto-isolated Push-Pull (HTL) Inputs • Outputs Push-pull (HTL) • Low consumption 70mA (without load) • Power supply 10..24v • Protection class ...
Please specify:
Help us improve:
remaining