Single-phase motors

Power: 0.25 ch - 1 ch

... TEAO (PSC variable speed, resilient base, thru bolt) 1/4 & 1/3 HP, 48YZ frame Totally Enclosed (direct drive, thru bolt, single and two speed) 1/4 to 3/4 HP TEAO (resilient base, thru bolt)

Power: 3, 4, 5.5 kW
Rotational speed: 1,450 rpm

... Ball-bearing with single crown. THERMAL PROTECTION IN THE WINDINGS – Electrical protections that are on the alimentation lines of the engine couldn’t be enough to ensure the over-loaded protection. In ...

Power: 0.12 kW - 3 kW
Rotational speed: 1,500, 3,000 rpm

... However, single-phase motors have lower starting torque and are less efficient compared to three-phase motors. Asynchronous motor ...

Power: 0.045 kW - 1.5 kW
Intensity: 1.1 A - 11.9 A
Torque: 0.31 Nm - 15.3 Nm

ALFAVERT motor, with an inverter board fitted inside the terminal box. This new solution revolutionises the performance of a single-phase motor, in a simple and economic ...

Power: 370 W - 5,500 W

... running induction electric motors YC SERIES SINGLE-PHASE CAPACITOR START INDUCTION AC MOTORS are suitable for powering small type machine tools and water ...

Single phase Atex, IECEx motor. The motors are designed for applications with increased starting torque.

Power: 3.1, 2.6 W
Torque: 0.026 Nm - 0.03 Nm
Rotational speed: 1,200, 1,000 rpm

The AC synchronous electric motor ASM 16 Series is manufactured by ASTRO Motorengesellschaft. The product has compact and durable design. The product comes with a ball bearing and the shaft speed is 100 ...

Power: 0.06 kW - 3.7 kW
Rotational speed: 3,000, 1,500 rpm
Diameter: 110 mm - 220 mm

... Applications: Pumps Motors Vacuum Cleaners Motors Fans Motors Motors For Ventilators, Exhaust Fans, Extractors Washing Machines Motors Motors ...

Power: 0.33 ch - 10 ch
Torque: 1.0105 ft.lb - 30.0999 ft.lb
Rotational speed: 0 rpm - 1,800 rpm

Standard Features - Manual Reset Protectors - High Efficiency Dual Cap Design - High Quality Molded Gaskets - Over 300% Starting Torque - Cast Iron End Bells - Dual Oversized Ball Bearings - Dependable Mechanical Starting Switch - ...

Power: 0.09 kW - 3 kW

Permanent Capacitor Motors are dual phase winding asynchronous motors. Compared to motors with starting capacitor of the same frame size, these motors ...

Power: 0.4 kW - 22 kW

Power: 0.09 kW - 2.2 kW
Rotational speed: 920 rpm - 2,850 rpm

ORANGE1 single phase motors are manufactured upon customer’s request following the standards indicated in the downloadable brochure. The standard configuration (STD) of single ...

Power: 0.18, 0.12, 0.25 kW
Torque: 0.62, 0.8, 0.82, 1.24 Nm
Rotational speed: 1,420 rpm - 3,000 rpm

1 phase asynchronous motors with start and run capacitor of Volt Electric are preferred for general electric motors applications especially in the following ...

Power: 180 W - 3,000 W
Torque: 1.2 Nm - 19.5 Nm
Rotational speed: 1,400 rpm - 1,410 rpm

Squirrel cage rotor - Totally enclosed fan cooled IP55 - Ins.cl.F - 230V 50Hz

Power: 150 W
Diameter: 47 mm - 90 mm

... power from 80W to 50KW, voltage supply 1 phase or 3 phase, IME is able to fulfill any requirement thanks to the ability to customize our products even for special applications. Induction motors ...

Power: 0.5 ch
Rotational speed: 1,375, 1,655 rpm

Single-phase Induction Motor for Packaging Machinery Pole : 4 output : 1/2hp Voltage : 100V Operating Frequency : 50Hz／60Hz Speed : 1375RPM／1655RPM

Power: 6 W - 400 W
Torque: 0.038 Nm - 2.435 Nm
Rotational speed: 1,200 rpm - 1,600 rpm

... supply voltage of North America, Asia and Europe. Single Phase Run For a single phase motor run, please use the condenser complying with the capacity ...

Power: 1, 0.5, 0.25, 0.33, 0.75 ch
Rotational speed: 300 rpm - 4,000 rpm

... torque EC Motor has been specifically design for multi-purpose HVAC and Indoor Air Quality applications. The TorqueSet® configuration comes with an on-board connector interface that allows both live programming capabilities ...

Power: 110, 150, 180, 230 W
Intensity: 0.8, 1.34, 1.8 A
Torque: 0.38, 0.51, 0.61, 0.8 Nm

... demand these motors can be ordered with double shaft configuration, allowing it to be coupled with a pump by means of flexible coupling that will be supplied with the motor. The standard powers are 4, ...

Single-phase motors with low power consumption in compliance with torque requirements Wide voltage range. Compact design. Available in UL (cURus) certified version. Single-phase ...

Power: 0.06 kW - 5.5 kW

Huifeng’s three phase and single phase motors are suitable for fans and blowers, the motors are reliable, durable, high efficient, flexible and safe, ...

Power: 0.25 kW - 2.2 kW
Intensity: 2.05 A - 12.53 A
Rotational speed: 2,830, 2,850, 1,400, 1,420, 2,800 rpm

... Series Single-Phase Capacitor-Start and Capacitor-Run Motors GW single-phase capacitor-start and capacitor-run motors can be applied ...

Power: 22, 72, 89 W
Intensity: 590, 700, 270 mA
Torque: 0.0075, 0.025, 0.031 Nm

Service life: 20,000 hours, S1 duty Insulation mat. class: B, optional F System of protection: IP 40 Special model: Design for short-time duty with high performance, Alloy rotor for higher starting torque Options: Thermal ...

Power: 0.06 kW - 3 kW
Rotational speed: 1,500, 3,000 rpm
Operating temperature: -20 °C - 40 °C

HM motors are delivered in two variants. HM1 for the expected performance during the motor run or HM2 for the expected performance during the motor startup and run. In our company, ...

Power: 0.09 kW - 900 kW

Santerno motors comply with the applicable European High Efficiency standards: High Efficiency IE2 and Premium Efficiency IE3 Maine features – External ventilation – Squirrel-cage rotor – Aluminium and cast iron ...