Single-stage pressure regulators

Pressure: 0.5 bar - 12.5 bar
Orifice diameter: 20 mm - 50 mm

R-RS -125 Medium pressure gas regulators R… type products are pressure regulators for gaseous media, suitable for all types of gas consuming appliances. R-125 models are high pressure ...

Pressure: 31 bar
Orifice diameter: 9 mm - 66 mm

The FloCon (S)PORT/ (S)PORTII commercial evaporator pressure regulators provide tight control in a variety of applications. The commercial pressure regulator (S)PORT/ ...

Temperature: 0 °C - 50 °C

... Model 415 & 425 Electronic Pressure Regulators combine the proven Porter EPC Electronic Proportional Control Valve with an integrally-mounted pressure sensor and the ...

Pressure: 0 bar - 20 bar
Flow: 70, 2,700, 150, 1,000 m³/h
Orifice diameter: 0.25 in - 2 in

EPP4 electro pneumatic pressure regulator range with integrated electronic system provides highest accuracy thanks to a high precision closed loop signal. The regulator is also designed ...

Pressure: 413 bar - 1,034 bar
Orifice diameter: 0.25, 0.5, 0.38 in
Temperature: -26 °C - 73 °C

... use in R & D labs, pressure filling, calibration testing, burst testers, component testing and high pressure hydraulic or pneumatic applications. Specifications Pressure Rating -Maximum ...

Pressure: 0.07 bar - 34.5 bar
Flow: 1.7 m³/h
Orifice diameter: 1, 0.25 in

1305 Series regulators are direct-operated, pressure reducing regulators that resist hydrate formation and regulator freeze-up typically used on high-pressure ...

Pressure: 0 bar - 17 bar
Flow: 80 ft³/min
Orifice diameter: 0.25 mm

... valve which is balanced by utilising a rolling diaphragm, insures a constant output pressure even during wide supply pressure variations. Stability of regulated pressure is maintained ...

Pressure: 0.01 bar - 9.5 bar
Flow: 0 l/min - 0.02 l/min
Temperature: 5 °C - 50 °C

... high performance auto pressure regulator UR-Z700 Series has electronic regulators with high-precision pressure sensors and high resolution, fast response piezo actuator ...

Pressure: 63 bar
Flow: 0 m³/h - 1.15 m³/h
Orifice diameter: 0.75 in

USAGE Pressure control MEDIUM Gases Air and non-flammable gases VERSION DIN FUNCTION Pressure build-up regulator Pressure reducing valve APPLICATION ...

Pressure: 300 psi
Flow: 0 ft³/min - 15 ft³/min
Orifice diameter: 0.13 in - 0.25 in

14R non-modular mini regulators provide a convenient and low cost method to reduce a supplied air pressure to desired outlet pressure. 14R provides quick and accurate pressure ...

Pressure: 100 psi
Temperature: -5 °C - 60 °C

Air Regulator Series AR-A have been updated to the new urban white base color for a clean modern look. The pressure drop across the regulator has been reduced to create a more efficient ...

Pressure: 0 bar - 16 bar
Orifice diameter: 4 mm - 10 mm
Temperature: -10 °C - 70 °C

Parker Legris pressure regulators stabilise at the maximum determined value of the pressure delivered to the pneumatic equipment at any given fluctuations of the pressure ...

Pressure: 15 MPa
Orifice diameter: 25 mm - 300 mm
Temperature: -20 °C - 60 °C

... require precise pressure and sensitive reaction. Characteristics ◆Full forged steel, split structure, safe and reliable, easy maintenance ◆Axial fully balanced design, suitable for high differential pressure ...

Pressure: 0.01 bar - 4 bar
Orifice diameter: 15 mm - 150 mm

... high degree of protection. * Outlet pressure range can be changed by fixing various colored coded standard springs. * Change in inlet pressure or change in volume, outlet pressure ...

... series pressure regulators offer the same technology found in the pneumatic version, with manual adjustment. Easy to operate and simple to install. Adjust pressure by rotating the handle. ...

Pressure: 10,000, 16 mbar
Flow: 13 l/min - 140 l/min
Orifice diameter: 68, 83, 117 mm

... well as oil Accuracy: at min. supply pressure and flow = < 5% FS pressure deviation at max. supply pressure and flow = < 15% FS pressure deviation at max. supply ...

Pressure: 75.84 bar
Orifice diameter: 6 mm - 15 mm

Single seated and self-actuating compact diaphragm-type regulators covering a wide range of designs and operating pressures A series regulators are suitable for a ...

Pressure: 50 psi
Orifice diameter: 0.13 in - 0.5 in

ROSS regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient ...

Pressure: 0.2 bar - 10 bar
Flow: 1,000 l/min - 14,000 l/min
Temperature: -10 °C - 50 °C

... gases Materials: Body: Grivory (PA66) and POM, seals: NBR,inner parts: zinc coated steel, stainless steel and brass Pressure regulator with diaphragm and relieving feature.Locking: rotary lock and ...

Pressure: 0.5 bar - 220 bar
Orifice diameter: 0.75 in - 1 in

... of Pneumatic Loaded Pressure Reducing Regulators developed by Tartarini. They use high pressure gas in compression with cylinders in applications of regulating stations. ...

Pressure: 50 bar - 1,000 bar
Flow: 6 l/min - 150 l/min
Orifice diameter: 80 mm

Pressure Testing Valve DPV Probably the best multifunctional pressure test valve worldwide with an extremely wide adjustment range. The URACA pressure test valve combines safety valve, ...

Pressure: 0.2 bar - 16 bar

Reducers series "UZRR" are produced in two different models: type UZRRH, fit for in-line or panel mounting and type UZRRM, fit for panel mounting or modular assembly (with filter and lubricator). Both the two models are available with ...

Pressure: 0 psi - 150 psi
Temperature: -18 °C - 50 °C

... installation costs in comparison with inline regulators. 2. Allows to have compact, all-included units. 3. Large orifice provides high flow. 4. Various functions available. 5. Simple, reliable and solid design.