- Hydraulics - Pneumatics >
- Valve >
- Single-stage pressure regulator
Single-stage pressure regulators
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Pressure: 0.5 bar - 13 bar
Temperature: -10 °C - 50 °C
•High flow rates, up to 850 Nl/min •ATEX II 2GD certified •G1/8 – G1/4 ports •Aluminium Die-casted body
PNEUMAX
Pressure: 0.5 bar - 20 bar
Flow: 8,000 l/min
Orifice diameter: 5, 20, 50 µm
• Diaphragm pressure regulator with relieving • Available in 4 sizes and connections from 1/8” to 1” • Low histeresis rolling diaphragm and balanced spool • Available in four pressure ...
PNEUMAX
Pressure: 0.5 bar - 20 bar
Temperature: -30 °C - 80 °C
• Piston piloted pressure regualator • Available with pressure gauge or digital pressure switch integrated • Atex certification (II 2GD or II 3GD)
PNEUMAX
Pressure: 2 bar - 10 bar
Orifice diameter: 0.13, 0.25 in
Series CLR micro pressure regulators are available with G1/8 and G1/4 connections. A piston with or without relieving and VS function (by-pass valve) has been incorporated into its design. The body ...
CAMOZZI AUTOMATION
Pressure: 0 bar - 10 bar
Orifice diameter: 0.13 in
The Series TC pressure regulator has been designed to be used for all the applications and equipment where it is needed to insert the single component in customized integrated pneumatic ...
CAMOZZI AUTOMATION
Pressure: 0 bar - 10 bar
Orifice diameter: 0.25, 0.13 in
» Knob with closure » Integral return exhaust (relieving) Series N pressure regulators are available with G1/4 and G1/8 ports. Their design incorporates a self relieving diaphragm so as to allow ...
CAMOZZI AUTOMATION
Pressure: -1 bar - 12 bar
Flow: 150 l/min - 1,630 l/min
Orifice diameter: 0.13 in - 0.5 in
The directly actuated valve with integrated pressure compensation regulates dynamically and precisely even with large nominal widths. An efficient plunger actuator makes VPPI highly dynamic, a subordinate position controller ...
FESTO
Pressure: 0.5 bar - 7 bar
Flow: 350, 170 l/min
Temperature: -5 °C - 50 °C
... requirements • Stabile control response • With or without pressure gauge • Rotary knob with latch • With integrated secondary venting and primary venting with return flow function • MS2: Direct operated ...
FESTO
Pressure: 0.5 bar - 12 bar
Flow: 1,700 l/min
Temperature: -10 °C - 60 °C
... with minimal pressure drop • Good regulation characteristics with minimal pressure hysteresis and primary pressure compensation • With or without secondary venting • Lockable rotary ...
FESTO
Pressure: 50,000 Pa - 850,000 Pa
Orifice diameter: 0.13 in - 0.5 in
Regulator with Built-in Pressure Gauge ・Improved visibility by mounting the pressure gauge on the top of the knob
Pressure: 0 bar - 14 bar
The IR 3000 Series Regulator with 3/4" & 1" sizes, made from only high grade materials. Built to withstand any kind of working condition. With modular design for easy transport and assembly and bright, flush mount gauge ...
ARO, Ingersoll Rand
Pressure: 0 bar - 14 bar
Ingersoll Rand ARO 2000 Series Regulator offers industry-leading flow rates. The completely modular design of the regulator includes a panel nut and has a bright flush mount gauge that has a settable ...
ARO, Ingersoll Rand
Pressure: 0 bar - 10 bar
Ingersoll Rand ARO 1500 Series Regulator is available in 1/4" and 3/8" sizes, with 0-30, 0-60, and 0-140psi spring options. It provides industry-leading flow rates with modular design and a full line accessory set. It ...
ARO, Ingersoll Rand
Pressure: 20 bar - 400 bar
Flow: 0.07 l/min - 15 l/min
Orifice diameter: 4.8 mm - 12 mm
DOPAG material pressure regulators reduce the pressure of the pumped material down to the optimum working value. They are designed specifi cally for the precise dosing of greases, oils ...
Pressure: 0 mbar - 100 mbar
Orifice diameter: 15 mm
DN 15, outlet pressure pd 15-23 mbar as standard (factory setting: 20 mbar), with screw plug at the inlet, for gas, pu max. 100 mbar, EU certified. Features & Benefits: EU certified
Honeywell Thermal Solutions
Pressure: 0 bar - 400 bar
... Applications •Gas and liquid chromatography •Fermenter pressure control (Biotechnology) •Vapour pressure control in MOCVD processes (bubbler systems) •Protective ...
Bronkhorst
Pressure: 1.28 bar - 64 bar
Orifice diameter: 0.25 in
Bronkhorst® EL-PRESS Metal Sealed Pressure Meters and Controllers are characterised by their unique, patented metal-to-metal seal construction with excellent resealing capability. Furthermore they distinguish themselves ...
Bronkhorst
Pressure: 0.7 mbar - 400,000 mbar
Flow: 0.1 l/min - 100 l/min
Orifice diameter: 0.01 mm - 2 mm
... Applications •Process pressure control in food, pharma and (petro-)chemical installations •Fermenter pressure control (Biotechnology) •Fuel Cell technology •Protective ...
Bronkhorst
Pressure: 700 bar
Flow: 6.3 l/min - 24 l/min
Orifice diameter: 4, 3, 43, 44, 48 mm
... mounted on the housing. In the case of type HKF, the fan is powered by a separate motor independently of the pump motor. Single-circuit, dual-circuit or triple-circuit systems can be assembled. A radial piston pump, ...
HAWE Hydraulik SE
Pressure: 700 bar
Flow: 21, 6.11 l/min
Orifice diameter: 32, 34, 38 mm
... hydraulic system, is mounted on the housing. The type HKL is installed lying down, requiring only minimal installation height. Single-circuit, dual-circuit or triple-circuit systems can be assembled. A radial piston ...
HAWE Hydraulik SE
Pressure: 700 bar
Flow: 5.77, 25, 11.3, 45 l/min
Orifice diameter: 2, 4 mm
... type KAW contains a single-phase-motor. The compact hydraulic power pack type KA and KAW is available in horizontal and vertical versions. Modules can be added to the tank so that different usable oil volumes are possible. ...
HAWE Hydraulik SE
Pressure: 10 psi - 300 psi
Flow: 85, 140 l/min
Orifice diameter: 0.13 in
Clippards Regulators are offered in two versions, relieving and non-relieving. The relieving regulator will maintain a constant pressure output even if there is a change in the downstream ...
Pressure: 0.1 bar - 7 bar
Temperature: 0 °C - 110 °C
... Precision Diaphragm Regulators: When Clippard invented miniature regulators in 1962, the MAR Series became very popular as a simple, robust, and cost-effective regulator in a small package ...
Pressure: 7 psi - 125 psi
Flow: 113 l/min
The MMR-1N maximatic regulator by Clippard gives accurate regulation of the air varying from 7 to 125 psig while regulating range ranges from 7 to 100 psig for the MMR-1N whereas 7 to 125 psig for the rest. For adjusting ...
Pressure: 0.3 bar - 10 bar
Flow: 0.13 m³/s
Temperature: -20 °C - 65 °C
Reduced weight and size Flush mounted integrated gauge A flexible modular system Tamper resistant options using built in padlock Medium: - Compressed Air Port Size: - G1/2
Norgren
Pressure: 0.3 bar - 10 bar
Flow: 0.13 m³/s
Temperature: -20 °C - 65 °C
Reduced weight and size Flush mounted integrated gauge A flexible modular system Tamper resistant options using built in padlock
Norgren
Pressure: 0.7 bar - 17 bar
Flow: 0.13 m³/s
Temperature: -20 °C - 65 °C
Reduced weight and size Flush mounted integrated gauge A flexible modular system Medium: - Compressed Air Port Size: - G3/4
Norgren
Pressure: 25, 16, 40 bar
Orifice diameter: 15 mm - 150 mm
Temperature: -60 °C - 450 °C
Excess pressure regulator, straight through with diaphragm actuator eClass-No.:37010990 Application:Industrial installations, processing technology, plant manufacturing, etc. Medium:Steam, neutral ...
Pressure: 0 bar - 12 bar
Flow: 550, 400 l/min
Quantity per package: 0 Minimum order quantity: 0 Unit of measure: items Valves Functional denomination: Sandwich regulator for bases ISO 5599/1 Max temperature (°C): 60 Min temperature (°C): -10
METAL WORK
Pressure: 0 bar - 15 bar
Flow: 570 l/min - 7,600 l/min
Orifice diameter: 0.13 in - 1 in
... in maintaining the pressure setting, both with both variable flow rates and different supply pressures. The regulator indudes a compensation system that keeps the pressure ...
METAL WORK
Pressure: 0 bar - 15 bar
Flow: 1,100 l/min - 20,000 l/min
Orifice diameter: 0.25 in - 2 in
... its own constant operating pressure. It is necessary to use a regulator to regulate the pressure within a set range by means of regulating springs, with the pressure ...
METAL WORK
Pressure: 300 psi
Flow: 1.6 l/min
Orifice diameter: 0.25 in
DeVilbiss pressure regulators, for liquid spray applications, have the highest fluid input compression in the industry Gun Mounted regulators available in circulating ...
Pressure: 0 bar - 138 bar
Flow: max 2520.0 l/h
... feed tanks, diaphragm pumps or any size paint circulating systems. They provide high pressure accuracy with no pressure creep with the minimum setting pressure being ...
Pressure: 1 bar - 21 bar
Flow: 150 m³/h - 2,700 m³/h
Orifice diameter: 0.25 in - 2 in
... pneumatic pressure regulator. The COMFORT range regulators have a second M12 connector that can be used to connect the device to a PC to easily configure the regulation parameters.A pulsed ...
Parker Fluid Control Division - Europe
Pressure: 0 psi - 400 psi
Orifice diameter: 1.27 mm
... This is a single stage regulator, and is ideal for applications with steady inlet pressures up to a maximum of 500 psig. Outlet Pressure Range: Maximum ...
Beswick Engineering Co, Inc.
Pressure: 0 psi - 50 psi
Orifice diameter: 0.89 mm
... PRDB series regulator features an improved valve design compared to the PRD series regulators. This allows for improved seal reliability and precision at very low outlet pressures, pressure ...
Beswick Engineering Co, Inc.
Pressure: 0 psi - 20 psi
... miniaturization and light weight. Max Inlet Pressure Rating: This is a single stage regulator, and is ideal for applications with steady inlet pressures ...
Beswick Engineering Co, Inc.
Pressure: 20 psi - 500 psi
Orifice diameter: 0.25 in
Temperature: -60 °C - 150 °C
For using gas and liquid Seat material: Teflon, PFA, and Spécial Teflon Seat available CV flow coefficients: 0.06 Process connection: WNPT female Two gauge connection ports are: WN PT female Use no oil: available
Golden Mountain Enterprise
Pressure: 1.96 bar - 245.17 bar
Temperature: 80 °C
... spring-loaded piston and adjusting nut as well as o-ring to protecting gauges. The protector closed at a set point pressure when over pressure flow in to gauges. Technical Data Connection Size: ‘/2"NPT ...
Golden Mountain Enterprise
Pressure: 150, 500, 250 psi
Orifice diameter: 0.5 in
Temperature: -60 °C - 150 °C
Seat material: Teflon, PFA, and Spécial Teflon Seat available CV flow coefficients: 1.0 Process connection: Vè”NPT female Two gauge connection ports are: W’NPT female Use no oil: available
Golden Mountain Enterprise
Pressure: 0 bar - 85.3 bar
Flow: 0 l/min - 50 l/min
Temperature: 50 °C
BEZARES S.A.
Pressure: 0 psi - 42 psi
Temperature: 50 °C
BEZARES S.A.
Flow: 0 l/min - 50 l/min
Temperature: 50 °C
BEZARES S.A.
Pressure: 8, 5, 3, 2, 10 bar
... feature, this universal pressue control truly stands out as it guarantees improved flow rate. They used plastic to create the square unit, making it lightweight and cost-efficient. This pressure controller ...
Kendrion Kuhnke Automation GmbH
Pressure: 4, 2, 10, 8 bar
Druckregler’s pressure regulator for 2 x 3.9 mm sub plate mounting features a good regulating performance and flow rate generation. It is set at a 8 bar pressure range setting and can ...
Kendrion Kuhnke Automation GmbH
Pressure: 8, 3, 2, 5, 10 bar
Flow: 5 l/min
The universal pressure control valve has a pressure range which is 10 bar maximum and a pressure range of 05 bar in setting. Its ambient temperature ranges from 0 °C+60 ...
Kendrion Kuhnke Automation GmbH
Pressure: 300 bar
Orifice diameter: 0.25 in
Ergonomically designed line pressure regulator For non-corrosive industrial gases Single-stage type with high control accuracy Central filter in the ...
Spectron Gas Control Systems GmbH
Pressure: 0 bar - 10 bar
Flow: 300 l/min - 5,000 l/min
• Adjustment hand grip with locking device • Max. inlet pressure 12 bars • Adjustment field: from 0 to 10 bars • Flow:1.700 Nl/min 6 bars
Pressure: 0 bar - 8 bar
Flow: 5 m³/h - 20,000 m³/h
Orifice diameter: 17.5 mm - 115 mm
The MEDENUS gas pressure regulator type RS250 ensures a constant outlet pressure - regardless of the primary (inlet) pressure - when the gas usage varies and ensures ...
MEDENUS Gas- Druckregeltechnik GmbH
Pressure: 0 bar - 16 bar
Flow: 5 m³/h - 15,000 m³/h
Orifice diameter: 17.5 mm - 115 mm
The MEDENUS gas pressure regulator type RS254 ensures a constant outlet pressure - regardless of the primary (inlet) pressure - when the gas usage varies and ensures ...
MEDENUS Gas- Druckregeltechnik GmbH
Pressure: 0 bar - 16 bar
Flow: 5 m³/h - 25,000 m³/h
Orifice diameter: 3 mm - 115 mm
... DN50 to DN100 and a maximum inlet pressure of 16,0 bar. All gas pressure regulators are certified by DVGW and CE. The pilot operated regulators series RSP254/255 are applicable to ...
MEDENUS Gas- Druckregeltechnik GmbH
Pressure: 0 bar - 12 bar
Flow: 900 l/min
Temperature: -5 °C - 50 °C
... minimum. The pressure micro-regulator guarantees high performance with excellent stability. Structure designed for panel mounting Robust and compact dimensions to save space inside the pneumatic ...
Airwork Pneumatic Equipment
Pressure: 0 bar - 15 bar
Flow: 600 l/min
Temperature: -10 °C - 50 °C
The XRO series is a series of pneumatic pressure regulators manufactured by Airwork Pneumatic Equipment. Utilizing an air fluid, it features the ability to deliver a maximum pressure ...
Airwork Pneumatic Equipment
Pressure: 0 bar - 15 bar
Flow: 600 l/min
Temperature: -10 °C - 50 °C
QUICK EXHAUST REGULATOR Technical data Fluid: Air Maximum pressure: 15 bar Temperature: -10 / +50° C Regulation range: 0-2bar 0-4bar 0-8bar standard 0-12bar 6bar flow rate with ∆p 1bar: 600Nl/min Manometer ...
Airwork Pneumatic Equipment
Pressure: -15 psi - 4,000 psi
Orifice diameter: 0.25, 0.13 in
Temperature: 0 °C - 121 °C
... mechanical pressure regulator offers exceptional pressure output precision by virtue of its high-resolution control of the supply pressure. The pressure regulator unit provides bubble-tight shut-off on helium at 7 bar. Features • Pressure ...
Pressure: 0.5 bar - 30 bar
Flow: 15 m³/h
Orifice diameter: 50 mm
... dome-loaded pressure regulator set. For high and varying flows requiring maximum pressure stability. Features: Pilot Control Tube (PCT) One of the features enabling highly accurate ...
WITT-Gasetechnik
Pressure: 0.5 bar - 30 bar
Flow: 15 m³/h
Orifice diameter: 2 in
... of WITT dome pressure regulators is the result of a complex technology consisting of perfectly matched components: • - Pilot Control Tube (PCT): One of the features enabling highly accurate control ...
WITT-Gasetechnik
Pressure: 0.5 bar - 10 bar
Flow: 2.4 m³/h
Orifice diameter: 0.75 in
... dome-loaded pressure regulator-set. For high and varying flows requiring maximum pressure stability. A complete solution, applicable as a manifold pressure regulator ...
WITT-Gasetechnik
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- WITT single-stage pressure regulators
- CAMOZZI single-stage pressure regulators
- Norgren single-stage pressure regulators
- MEDENUS single-stage pressure regulators
- AIR Logic single-stage pressure regulators
- METAL WORK single-stage pressure regulators
- NEW-Flow single-stage pressure regulators
- BESWICK single-stage pressure regulators
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining