Diameter : 18, 25 mm
... in one drill body. It is not possible to integrate the modules into solid carbide drills. Due to the compact size of the chamfering module, it can be installed directly behind the ...
Diameter : 0.2 mm - 1.49 mm
Length: 25 mm
... range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8’ and 4.00 mm. We can also deliver with the ...
Whizcut of Sweden AB
Diameter : 0.5 mm - 10 mm
Length: 38 mm - 118 mm
Self-centering twist drills with reinforced shank, 6.5xD1 cutting length. High-performance tools developed for the drilling of short chip materials.. TiAlN coating improves tool life in ferrous materials.
DIXI Polytool
Diameter : 10 mm
Length: 21.4 mm
Aludrill Ø 9.0 mm with flat finish for M10 cold forming tap PART SPECIFICATION THREAD SIZE - M10 FINISHING - Plane surface SHAFT DIAMETER - 14.0 mm MATERIAL/MACHINE PARAMETERS MIN. MATERIAL THICKNESS - 1.0 mm MAX. MATERIAL ...
FLOWDRILL
Diameter : 3 mm - 16 mm
Length: 46 mm - 115 mm
• facet point grind • main cutting edge form straight • optimised cutting edge geometry structural and case hardened steels • free-cutting steels, heat-treatable steels • alloyed steels up to 1200 N/mm² • cast materials • bronze, brass ...
GÜHRING
Diameter : 4 mm - 12 mm
Length: 12 mm - 96 mm
... with polished flutes New 3 Flutes Solid Carbide Drill for Increased Productivity As part of TaeguTec’s new SFEED-TEC series of technologically advanced cutting tools, the SOLID-3-DRILL ...
TAEGU TEC España
Diameter : 0 mm - 6.4 mm
Length: 0 mm - 144 mm
... action Shorter than the top competitor's bit for better access to tight spaces between studs and joists Perfect for drilling 2 IN and 4 IN joists Augers have self-feeding screw point that ...
GREENLEE
This AMECA hand-operated installation tool drilling bit is the ideal unit to use with applications that require a commercially-available standard drill bit. All AMECA ...
Diameter : 12 mm - 40 mm
Length: 320 mm - 570 mm
For fitting in SDS-max chucks For rapid drilling in concrete, masonry and natural stone Advantages Four-cutting-edge drill bit for good centring in the drill hole Good ...
Diameter : 0.5 mm - 20 mm
Length: 50 mm - 150 mm
DRILLING AND THREADING FOR THERMOPLASTICS, CURABLE PLASTICS AND ELASTOMERS The requirements for synthetic compo- nents rise continuously. The quality of drills is especially concerned. In the series ...
Hufschmied Zerspanungssysteme GmbH
Diameter : 3 mm - 10 mm
Length: 16 mm - 38 mm
Drill bits for wood HSS-G with 1/4" Hexagon Drive
VÖLKEL GmbH
Diameter : 10 mm
Milling cutter bodies Multi-purpose cutter with indexable inserts With POKOLM's insert cutter system, tools and rotating inserts are perfectly matched to form a comprehensive range of products capable of dealing with almost any condition. Thanks ...
... PCD step drill from MAPAL ensures optimum chip transport so that extreme reductions in machining time for drilling and boring processes in aluminium parts are possible. Where previously three tools were ...
MAPAL
Diameter : 3, 4, 5, 6 mm
Length: 60, 75, 85, 90 mm
HSS DRILL BIT + MANDREL FOR WOOD Centring point, 2 lay-out markers. 90° mandrel with 5 cuts.
Diameter : 0.01 mm - 0.05 mm
Length: 40 mm
... times longer than its diameter, and is finished with a Mugen micro coating. It also has a special thin film coating for Micro Drill operations on steel materials including stainless steel items. The cutting edge also ...
NS TOOL
... a wide range of carbide drills for processing diverse materials. With drill diameters in increments of 0.1 mm (up to diameters of 20 mm) and with drill bit ...
Leistritz Produktionstechnik Werkzeug GmbH
Diameter : 10 mm - 30 mm
THUNDER T80, the new drill for HARDOX T80 is a drill in solid carbide with double cooling channels and a drill bit specially developed for drilling ...
Diameter : 1 mm - 10.9 mm
Length: 40 mm - 95 mm
... 90 and 140-degree point angle, the tool's performance is maximized. • Implements stable drilling with a flute groove design considering chip evacuation and drill rigidity.
Diameter : 12 mm - 19.99 mm
The QUICKDRILL is a drill with a new locking mechanism designed to withstand unstable machining environments. It performs well in unstable applications such as interrupted cuts and asymmetrical holes. Additionally, ...
Diameter : 25 mm - 40 mm
Length: 55 mm
A wide range of core drills is available for drilling phase. They are available both sintered with segments for granite and engineered stone and electroplated for marble. All core drills ...
Diameter : 0.08 in - 0.5 in
Length: 2, 3 in
Solid Carbide Armor Drills Armor Drills for Drilling Out Broken Taps Machine and Drill High Speed Steel, Granite, Armor Plate and Other Very Hard ...
The Series of Drill Bit, manufactured by SAU TOOL S.p.A., is designed based in field of solid carbide. This device ensures a vast range of drills in solid ...
SAU TOOL S.p.A.
Diameter : 0.1 mm - 8.5 mm
... Super long combined forming products according to requirements of drawings, samples, and size tolerance. (Super-hard drill bits for high hardness application) For other size specification and special ...
LZQ TOOL CO., LTD.
Diameter : 0.2 mm - 3 mm
Length: 38, 50 mm
... high-precision micro-drills and whirlers complete our offering by providing solutions for all levels of your product manufacturing, with a wide range of coatings for all types of materials. Our range of NC centerers, ...
Eskenazi
Please specify:
Help us improve:
remaining