Solid-shaft gear-motors

Gear ratio: 5 unit - 200 unit

Brushless DC motor with driver for 24 VDC Features Motor protection class up to IP65 Compact driver board High speed stability Energy-saving High torque at low speeds Torque ...

Gear ratio: 5 unit - 200 unit

... permissible torque: 0.41 - 108 Nm Options: Spur gear, hollow shaft flat gear, electromagnetic brake

Gear ratio: 506 unit

... mode: S2 ■ Rotation direction: Left and right rotation ■ Rotation in both direction: The Bosch small geared motors can be used as a drive ■ Available with hall sensor: For positioning or direction ...

For reliable performance in reduced size: The Bosch compact geared motors are the appropriate solution for industrial applications with limited space. These drives exhibit high power density and cover a broad field of ...

For reliable performance in reduced size: The Bosch compact geared motors are the appropriate solution for industrial applications with limited space. These drives exhibit high power density and cover a broad field of ...

Gear ratio: 6 unit
Operating temperature: 155 °C

This size 6 brushless DC slotted mini motor is optimized for arthroscopic shaver applications. Motor torque and speed makes this an ideal solution for powered surgical hand tools that ...

Gear ratio: 6 unit
Operating temperature: 155 °C

This size 6 brushless DC slotted mini motor is optimized for arthroscopic shaver applications. Motor torque and speed make this an ideal solution for powered surgical hand tools that ...

Gear ratio: 4 unit

... brushless DC slotted motor can withstand more than 1,000 medical dishwasher and autoclave cycles. The unique output shaft seal option prevents liquids from entering the motor, ...

... with integrated gearheads and optical encoders – both with an extremely flat design matched to the motors. When combined with integrated gearheads and encoders, they provide a very compact ...

... integrated electronic actuation unit, a speed controller is already available for these motors. What makes this speed controller so special is that it is fully integrated on the motor ...

Gear ratio: 1.35 unit - 14,340.31 unit

... Helical Gear Units have been produced according to the tried and tested UNICASE principle since the 1980s and are characterised by low maintenance and a long service life Version • Solid shaft ...

Gear ratio: 1.07 unit - 456.77 unit

... the same time provides a smoother surface on which neither liquids or solid materials can accumulate Version • Solid shaft gear units • Foot or flange mounted • ...

Gear ratio: 1.92 unit - 488.07 unit

Standard Helical Gear operation is a design which meets the basic requirements for the performance of gear units and geared motors and among other areas, can be used in intralogistics Version • ...

Gear ratio: 7.4 unit - 441.9 unit

... aluminium. Case-hardened and hardened gear pairs with shafts rotating on roller bearings. Lubrication with long-life oil. Sealing rings made in special rubber for high temperatures. 15 gear ...

Gear ratio: 10 unit - 80 unit

Single-phase and three-phase motors till 20 W. Centre distance 20 mm. MOTOR: Single and three phase with 2 poles, totally enclosed with external ventilation. Safety thermal cutout on single phase ...

Gear ratio: 50 unit - 400 unit

WORM GEARED MOTORS PLUS FINAL PLANETARY REDUCTION STAGE. Single-phase and three-phase motors till 20 W. Centre distance 20 mm. MOTOR: asynchronous single and three-phase with 2 ...

Gear ratio: 256, 64, 16 unit

Length "L" of the gearmotor as a function of reduction and output number of revolutions with the standard motor 724, output 5 W, 12000 Rpm loadness, 12 or 24 Vdc. Starting current 1,6 A (3 A x 12 Vdc). Output ...

Gear ratio: 16, 64, 256 unit

... 2". Max forces which may act on the output shaft: Axial 0 N, Radial 10 N on the extremity of output shaft. The standard motors are in conformity with CE standard. Possibility ...

Gear ratio: 4 unit - 216 unit

... bushings. Output shaft supported by two coupled screened bearings. The motor’s surface and reducer’s surface are both plated to avoid corrosion. The motor has an electrical suppressor ...

This electric automatic door motor, using 12V DC gearbox motor, can provide the best torque for all kinds of intelligent logistics robot electric ...

... noodle machine, electric door, robot, etc. With 19 years of experience in customizing gearbox motors, Power Motor is committed to providing reliable and low-cost gearbox ...

Gear ratio: 3.4 unit - 290 unit

... effciency electric motors (IEC or NEMA), available with ioT-based smart inverter. Made in Rossi: quality for the perfect Fit. FEATURE Fully interchangeable with market standards Made in Europe Full ...

Gear ratio: 2.86 unit - 183.53 unit

... your own geared motor, ideally tailored to your needs - our modular geared motor series makes it possible! In the area of helical gear units, seven different gear unit ...

Gear ratio: 6.54 unit - 171.12 unit

... helical bevel gear unit could be the solution! This special version of the helical gear unit is a combination of a helical gear unit with parallel axes and a bevel gear ...

Gear ratio: 10 unit - 60 unit

The Heidrive worm gear is available with a torque of up to 20 Nm and can be ordered with ratios between 1:7 and 1:100. This gear is filled with synthetic oil, closed and therefore maintenance-free. ...

Gear ratio: 3 unit - 200 unit
Operating temperature: -10 °C - 40 °C

... twice that of ordinary spur gears. The bevel gear of the reducer adopts a hypoid spiral bevel gear, and the tooth surface is grinded, which has the characteristics of low noise, high ...

Gear ratio: 3 unit - 200 unit
Operating temperature: -10 °C - 40 °C

... twice that of ordinary spur gears. The bevel gear of the reducer adopts a hypoid spiral bevel gear, and the tooth surface is grinded, which has the characteristics of low noise, high ...

Gear ratio: 3 unit - 200 unit
Operating temperature: -10 °C - 40 °C

... twice that of ordinary spur gears. The bevel gear of the reducer adopts a hypoid spiral bevel gear, and the tooth surface is grinded, which has the characteristics of low noise, high ...

Gear ratio: 4 unit - 162 unit
Operating temperature: 40 °C

24A4-60P Series Inline Planetary DC Gearmotor STANDARD FEATURES • 24A motor provides high starting torque, adjustable speed, and predictable performance. • Pre-seated motor ...

Gear ratio: 6 unit - 450 unit
Operating temperature: 40 °C

24A-D Series Parallel Shaft DC Gearmotor STANDARD FEATURES • 24A Motor provides high starting torque, adjustable speed, and predictable performance under a range ...

Gear ratio: 6 unit - 180 unit

... Parallel Shaft DC Gearmotor STANDARD FEATURES • 24A Motor provides high starting torque, adjustable speed, and predictable performance under a range of operating ...

Gear ratio: 70 unit - 2,500 unit

Worm Gear SN7 Two-stage gear drive with solid shaft Gear Type: SN7 Motor Type: Three-Phase and Direct Current Mounting: ...

Gear ratio: 33 unit - 394 unit

Worm Gear SN19 Two-stage gear drive with solid shaft Gear Type: SN19 Motor Type: Three-Phase and Direct Current Mounting: ...

Gear ratio: 7, 15, 20, 30, 55 unit

Gear Drive SN18H Single-stage gear drive with hollow shaft Gear Type: SN18H Motor Type: Three-Phase, Direct Current ...

Gear ratio: 10.33 unit

Brushless motor with accessory items (reducer, brake, wheel and bracket) were attached to it, suitable for autonomous mobile robots (AMRs) or AGVs with light to middle payload. Ask us about small lot purchase. Gear ...

Gear ratio: 10.33 unit

Brushless motor with accessory items (reducer, brake, wheel and bracket) were attached to it, suitable for autonomous mobile robots (AMRs) or AGVs with light to middle payload. Ask us about small lot purchase. Gear ...

Gear ratio: 10.33 unit

... sensor equivalent to 15-bit resolution. These motors are suitable for driving AMR/AGVs, etc. used in warehouses and factories that require stable running performance in the stop to low-speed range. These motors ...

Gear ratio: 150 unit
Operating temperature: 40 °C

DYD Gear Motor Series Gearbox Available: Spur Gearbox, Worm/Right Angle Gearbox, Planetary Gearbox Motor type: Brushed DC Motors ...

Operating temperature: -40 °C - 120 °C

... 110JX, 120JX Gearhead Size: Outer diameter 16~ 120mm MOTOR TYPE Brushed DC Motors, AC Motors, Brushless DC Motors, ...

Gear ratio: 30 unit
Operating temperature: 40 °C

DYD DC Right Angle Gear Series DC worm gear motor/DC right angle gearmotor/DC motor with right angle gearbox/DC gearmotor/DC geared ...

Hydraulic gear motors are rotary actuators that convert hydraulic or liquid energy into mechanical force. They work in conjunction with a hydraulic pump that converts mechanical force into fluid or ...

Gear ratio: 4 unit - 3,027 unit
Operating temperature: -10 °C - 60 °C

PGM-16 is a high-quality series of Ø16mm brushed planetary gear motors designed for various applications. This gear motor offers reliable performance and efficient power ...

Gear ratio: 4 unit - 1,996 unit
Operating temperature: -10 °C - 60 °C

PGM-22 is a high-quality series of Ø22mm brushed planetary gear motors designed for various applications. This gear motor offers reliable performance and efficient power ...

Gear ratio: 4 unit - 939 unit
Operating temperature: -10 °C - 60 °C

PGM-28 is a high-quality series of Ø28mm brushed planetary gear motors designed for various applications. This gear motor offers reliable performance and efficient power ...

Gear ratio: 3.5 unit - 240 unit
Operating temperature: 0 °C - 100 °C

... the medium. Housing The gear reducer body and covers are made of highly resistant GG20 grey cast-iron, with ample proportions and deeply ribbed texture to withstand considerable stresses and vibrations. Gears The ...

... Line to line inductance：1.27±20%mH Rated current：3.2A Rated output power：50W No-load speed：4300 rpm Class insulation：B Gear Ratio：1:58.22 Output torque：7.5 N.m Output speed：51.5 rpm

... Line to line inductance：0.33±20%mH Rated current：12A Rated output power：200W No-load speed：4000 rpm Class insulation：B Gear Ratio：1:44.69 Output torque：23 N.m Output speed：67 rpm

GENERAL SPECIFICATION Gearbox Housing：Ruggedised Die-cast Aluminium Worm Gear Material：Bronze, steel or plastic Lubrication：Grease lubricated & sealed for life Bearing Type：High quality ball bearings Insulation ...

Gear ratio: 13 unit - 809 unit

08**...08*P... Dc 8mm Smaill Gear Motor Diameter：8mm Lengh ：28-35mm Voltage：4.2V、6V Gearbox：Metal planet gear 、Plastic injection.Factory:China shenzhen Applications medical ...

Gear ratio: 5 unit - 3,968 unit

22**...22*P... 22mm 24V Dc Planetary Gear Motor Diameter：22mm Length ： 55.5-80 mm Voltage：6V、6.8V、24V Gearbox：Metal planet gear、Metal injection、Plastic injection Matched ...

Gear ratio: 4 unit - 3,027 unit

16**...16*P... 16mm 12VDc Planetary Gear Motor Diameter：16mm Length ： 40-65 mm Voltage：3V、12V Gearbox：Metal planet gear、Metal injection Matched Motor Type：BLDC ...