Spool hydraulic directional control valves

Operating pressure: 2,000, 1,500 psi
Flow rate: 30 us gal/min

... rugged and dependable low cost valve. It is a series type, and is recommended for all general purpose applications except lifting heavy loads in a vertical position. It will operate a double acting cylinder or a bi-directional ...

PRECISION GROUND PLATED SPOOL that assures long life. DIAMOND HONED SPOOL BORE provides consistent spool fit with low leakage. EVERY FC IS TESTED for shutoff, linearity, and pressure ...

Operating pressure: 400 bar
Flow rate: 0 l/min - 65 l/min

... US gal/min] Work port pressure up to 400 bar [5,800 psi] Optimized spool design for progressive or linear flow Float capability for increased safety Actuator with closed loop control for built-in fault monitoring

... power brake unit or separate hydraulic fluid system Available as valve only, push-rod actuated, lever actuated and pedal actuated Optional designs with built-in ...

Operating pressure: 5,000 psi
Flow rate: 23, 36 us gal/min

... Work port relief valves and anticavitation check valves are available. Spool end caps, lever end or protected from dust by bellows inlet and outlet ports with threading ...

Flow rate: 22, 35, 50 l/min

High-frequency response equivalent to electric/hydraulic servo valve High-output proportional solenoid directly drives spool. Minor feedback with LVDT(Linear variable differential transformer) ...

Operating pressure: 315, 250, 160, 100 bar
Flow rate: 60 l/min - 1,100 l/min

Pilot operated directional valves -DHG, 04, 06, 10 – Valves made from using a solenoid operated pilot valve to operate the main valve, and by operating ...

Operating pressure: 0 bar - 700 bar
Flow rate: 0 l/min - 38 l/min

... stainless steel, hydraulic rotary direction control valve. It is the ideal solution for control of hydraulic actuators used in arduous environments where ...

Operating pressure: 1,000 bar
Flow rate: 1,300 l/min

... Oilgear engineering, the VR line of cartridge relief valves includes a range of distinct application advantages. From two-stage, pilot-operated to nonstandard, single-stage, direct-operated valves, there ...

Operating pressure: 5,000 psi
Flow rate: 5 us gal/min

... the pump is located near the operator with the valve mounted directly on the pump. This configuration eliminates the need for pressure and return lines between the pump and remote mounted control valves. ...

Operating pressure: 20 bar - 300 bar

This is a special non-leak valve for single-action circuits when using a hydraulic jig with a horizontal machining center and implementing a disconnect from the hydraulic pressure source ...

The hydraulic distributor P40 is used for switching on/off and directing the working fluid between head flow gernerators(hydraulic pumps), head flow consumers(hydraulic ...

Operating pressure: 10 MPa - 35 MPa
Flow rate: 80 l/min - 120 l/min

Electrical operated directional control valve uses solenoid to pull the spool and change the direction of the hydraulic oil. Electrical operated directional ...

Flow rate: 40 l/min

... rdquo;). Spring Return. Room temperature: -40 ° to 60 ° C. Viscosity: 12…800mm2/seg. Rated flow 40 l / min. Fluid temperature: -15 ° to 80 ° C. Filtration: 10 to NAS1638. Maximum working pressure: ...

Operating pressure: 210 bar
Flow rate: 120, 240 l/min

Flow Control Valve, Hydraulic Valve, Relief Valve It is a combination of a throttle control valve and an electromagnetic ...

The WE 5 are directional spool valves that are used to regulate the direction of liquid flow. This also alters the movement and position of the user either through a cylinder or hydraulic ...

Operating pressure: 3,500 psi
Flow rate: 20 us gal/min

Series 20 Stack Valve - 20 GPM STANDARD FEATURES 1 -10 Work Sections Extra Fine Spool Metering Power Beyond Capability Reversible Handle Load Checks on Each Work Port Hard ...

Cam Operated Directional Valves INSTALLATION DIMENSIONS: Mounting Surface: ISO 4401-03-02-0-94

Operating pressure: 180 bar - 350 bar
Flow rate: 100 l/min - 250 l/min

Sectional Directional Control Valves We offer a variety of Sectional Directional Control Valves, for fluid control. With ...

Operating pressure: 0 bar - 310 bar
Flow rate: 0 l/min - 55 l/min

... pulling control method available. Optional power beyond (other than 1 spool monoblock directional control valve). Optional mechanical positioning. Spool ...

Operating pressure: 72 bar
Flow rate: 5 l/min

The R2345-O Autopilot Cylinder Unloader valve is a line mounted valve used to bypass the hydraulic steering cylinder so the boat can be steered manually. It is operated by a 12 watt solenoid ...

Operating pressure: 350 bar
Flow rate: 40 l/min - 60 l/min

... P-R ports of 1/2 G. for the 1102 model. Diameter of spool 15 mm and stroke 5,5 mm, actuating system by hydraulic, pneumatic, electrical pilot, or by manual lever. A great variety of auxiliary valves ...

Operating pressure: 350 bar
Flow rate: 50 l/min

A screw-in, cartridge-style, pilot-operated, spool-type, vent-to-air, hydraulic directional valve for 3-way circuits requiring remote pilot actuation. Operation In ...

Operating pressure: 250 bar - 300 bar
Flow rate: 80 l/min - 130 l/min

... bar Standard PRESSURE RELIEF valve, may be set - da 10 a 300 bar Reversing spool for right-hand or left-hand inlet Positive spool overlapping Preset for CARRY-OVER - Working temperature ...

Operating pressure: 315 bar
Flow rate: 50 l/min

Sectional valves stated in other words sectional directional control valves are highly flexible and have various auxiliary valves such as anti-shock, ...