Spring check valves

DN: 0.125 in - 4 in
Pressure: 0 bar - 255 bar
Temperature: -29 °C - 400 °C

Check valves, also known as one-way valves, non-return valves, or single-flow valves allow fluid to flow in the direction of the arrow but do not allow ...

DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 140 °C

... and oil production. The check valve opens when the pressure of the fluid exceeds the pressure exerted by the spring. When the two pressures are compensated, the valve ...

DN: 32 mm
Pressure: 0 bar - 5 bar
Temperature: 0 °C - 60 °C

swing check valve with spring DN32 PN 10/16 DIN EN 1092-1 Form B plastic PVC-U seal EPDM for liquid and gaseous media tightness acc. to DIN EN 12266: - leak rate A installation position: ...

DN: 15 mm - 300 mm

• disco wafer check valve • spring loaded execution • flange connections according PN10/16/40 and A-150/A-300 on request • face to face dimension according DIN EN 558-1 • easy to install ...

DN: 10 mm - 100 mm
Pressure: 12, 16, 25, 40, 10 bar
Temperature: -10 °C - 150 °C

Full bore check valve, F/F threaded, Viton® seat suitable for application with not halogenated hydrocarbons and fuels (gasolines, kerosene...).

DN: 18 in - 56 in
Temperature: 780 °C

The fluidised catalytic cracking (FCC) air blower line check valves are used to prevent the backflow of catalyst from the regenerator. IMI Remosa’s check valves guarantee ...

DN: 3 mm - 8 mm
Pressure: 0.1 bar - 6 bar
Temperature: -40 °C - 180 °C

Check valves are used to prevent media from flowing back in systems or to protect equipment against media blow-back. The three types (with spring, without spring and ...

DN: 50 mm - 400 mm
Pressure: 16, 25, 40, 64, 100 bar
Temperature: -20 °C - 200 °C

... CV10 Series spring double check valve design is manufactured to withstand high operating pressures. The discs are opened 85 ° to provide positive closing. Sealing materials can be changed ...

DN: 0.25 in - 2.5 in
Pressure: 0 psi - 6,000 psi

... Basic-Check® Valve is a versatile all-purpose, non-slam valve that provides reliable, low-maintenance service for a wide range of liquids, steam and gases at various pressure/temperature ...

DN: 0.25 in - 1 in
Pressure: 0 psi - 30,000 psi
Temperature: 0 °C - 49 °C

The NuQuip® Model CV Series Check Valve is an in-line, piston style valve offering a zero leak design for applications requiring working pressures up to 30,000 psi (2,068 bar). The check ...

Temperature: 0 °F - 250 °F

... Series Silent Wafer Check Valve has a spring-loaded poppet that allows the valve to close before flow reversal occurs, resulting in a silent, non-slam closure. It is ...

DN: 40 mm - 250 mm
Pressure: 16 bar
Temperature: -10 °C - 80 °C

... minimum differential pressure of 3 mWC CHARACTERISTICS Anticipated closing thanks to the spring action minimize the intensity of the check valve shock. Hydraulically profiled ...

DN: 0.375 in - 2 in

... WOG spring Type Threaded Ends Comply with ANSI B2.1 3/8" - 2" Solder Ends Comply with ANSI B16.18 1/2" - 2" Valves are Tested in Accordance w/MSS-SP-82 Sizes 3/8" - 2" We also have lead free ball ...

DN: 10, 20, 32, 40, 50 mm
Pressure: 50 bar
Temperature: -196 °C - 120 °C

The Type 05411 of cryogenic check valves from Herose has spring and bronze body and cap. The device is cleaned and degreased for oxygen service. It is also equipped with a male thread ...

Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C

CHECK VALVES Size:Spring Check Valve [Technical Specification] Material Normal brass ; CW617N ;DZR Working Pressure PN25 or 2.5Mpa Seal ...

Pressure: 414 bar
Temperature: -184 °C - 232 °C

... specialty valves handle a wide variety of applications. Features and Benefits: Flexible Seal Seat™ for zero leak (bubble-tight) sealing to 6000 PSI O-Ring seal positively secured Non-pressurized ...

Pressure: 450 psi

... air compressor in-tank check valves. One-piece brass bodies, stainless steel springs, and glass-filled fluoropolymer poppets all add up to long term reliability, while the eight discharge ...

DN: 50 mm - 250 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 150 °C

The valves in Series 05 are check valves with cast iron bodies, that are manufactured in accordance with the most severe product norms, and in conformity with the quality requirements ...

Pressure: 2 bar - 8 bar
Temperature: -20 °C - 200 °C

Non-return valves series Areas of application : compressed air Technical features : - working pressure : 2 ÷ 8 bar - opening pressure : 0.5 bar - working temperature : -15°C ÷ 200°C Materials : - body in ...

Pressure: 250 bar
Temperature: -40 °C - 120 °C
Flow rate: 20 l/min

... · Industry common cavity · Compact size · Low leakage design Operation Pressure at ① overcomes the spring-bias poppet and allows free flow ① to ②.Flow in the opposite direction,from ② to ...

DN: 50 mm - 900 mm
Pressure: 150 bar - 2,500 bar

Dual Disc Lug Type Check Valve Body Material: Cast Iron, Ductile Iron, Cast Steel, Stainless Steel, Aluminium Bronze Disc: Ductile Iron, Stainless Steel, Aluminium Bronze Spring: ...

DN: 10 mm
Pressure: 350 bar

Spring loaded shuttle valve Connecting port: DN10 The spring positions the cone in a defined Position

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -20 °C - 200 °C

3-pcs. investment cast check valve in stainless steel with spring. Mounting in all directions. FDA

Pressure: 34.5 bar
Temperature: -29 °C - 93 °C

The function of a Check Valve is to allow fluid flow in one direction only. Applications Henry Technologies' Check Valves are suitable for use with HCFC and HFC refrigerants ...

DN: 15 mm - 1,000 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 180 °C