Stainless steel valves

DN: 0.25 in
Pressure: 414 bar
Temperature: -40 °C - 93 °C

316 SS, BF Series Ball Valve, CNG fast-fill, PEEK Seats, 1/4 Female NPT, 6000psig(414bar), -40°F to 200°F(-40°C to 93°C), 0.75 Cv, 3-way, 90° actuation, Low-temperature Service Body Material316 Stainless ...

DN: 16 mm
Pressure: 0 mbar

Category - Angle Valve, manual, KF, stainless steel Actuation - manual via hand wheel Item description - Manual Angle Valve, NW 16KF Stainless Steel, ...

DN: 50 mm - 400 mm
Pressure: 16 bar
Temperature: -40 °C - 80 °C

... industrial control valves, has a full range of industrial control valve solutions that continue to provide the most competitive control valve products to customers worldwide. We provide ...

DN: 50 mm - 500 mm
Pressure: 0.1 bar - 1.5 bar
Temperature: -25 °C - 80 °C

The disc valve is used for dust tight and (as an option) pressure tight locking of a hopper with bulk solids, or as a locking valve in pipelines for gases. • Dust-proof, pressure-tight, vacuum-tight ...

... patent-pending technology that includes high-temperature seals and adjustable valve pins, the system provides a flawless injection molding process. Speak to us today about our VeriShotᵀᴹ Single Valve ...

DN: 50 mm - 1,200 mm
Pressure: 1.6 MPa - 160 MPa
Temperature: -46 °C - 600 °C

GB Gâte Valve is suitable for the nominal pressure (CL150-CL2500),, chemical, thermal power plant and other conditions of the pipeline, eut off or connect the pipeline medium. Main material: carbon Steel, ...

DN: 0.5 in - 36 in

... side-entry ball valve is the most common and popular design. Given its great modularity, SRi can manufacture any side-entry ball valves with special options. In case of maintenance operation, all ...

Pressure: 300 psi
Temperature: 149 °C

Overview This valve is installed in the downstream of sampling systems/heat exchanger. The valve responds only to temperature. Under normal operation, the valve is fully open. If the ...

DN: 15 mm - 300 mm
Pressure: 150, 300 psi

... of MNC 3 & 4 Way Ball Valve. This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way ...

DN: 50 mm - 600 mm
Pressure: 1.6, 2.5, 4 bar

Pressure Relief Valve Body: Cast Iron, Ductile Iron, Carbon Steel, Stainless Steel Diaphragm: EPDM , NBR Disc: Cast Iron, Ductile Iron, Carbon Steel, ...

DN: 12.7 mm - 203.2 mm

... Series is a two piece, full port, flanged end ball valve with an ISO 5211 compliant direct mount actuation pad. The 10E10 is available in sizes ranging from ½” to 8” with ASME Class 150 flanges. Valve ...

DN: 15, 20, 25 mm
Pressure: 42 bar
Temperature: 426 °C

Complete SS construction, AISI 304, (Suitable for blowing out dirt from strainer element)

DN: 12 mm
Pressure: 0 bar - 40 bar
Temperature: 1 °C - 60 °C

... scale etc.) require the TEC-44. The TEC-44 is impossible to block due to its powerful ball valve rotation and large orifice. FEATURES Stainless steel ball valve, ...

DN: 1.411 mm
Pressure: 50 psi - 25,000 psi

... start/stop control of various pneumatically piloted devices such as HII pumps, valves and boosters. Maximum air valve pressure is 120 PSI. Sensing section alloys are stainless steel. ...

... Replaceable Seat on needle valve body available for improved valve life. Pneumatic Actuators for Remote Valve Operation Types Normally Closed – Air is required to open the valve ...

Hydraulic distributor with 4/3 way directional valve, 350 bar of pressure, built in stainless steel for hydrodynamic presses for forging and extrusion. We design and build any hydrodynamic ...

DN: 10 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 180 °C

FPM shaft “o” ring PTFE + 15% GF ball seats Stainless steel valve BSP threaded Nominal pressure: 100 Bar Working pressure: see pressure / temperature diagram Temperature = -20°C +200°C

DN: 15 mm - 600 mm
Temperature: 260 °C

... sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel ...

DN: 15 mm - 50 mm

... DN40, DN50 material specifications housing, not in contact with medium: stainless steel 1.4435 / 1.4404 Tri-Clamp: stainless steel 1.4435 / 1.4404 screws: stainless ...

DN: 50 mm - 250 mm
Pressure: 10 bar
Temperature: 150 °C

The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...

DN: 0.75 in - 1.25 in
Pressure: 4.4 bar - 16 bar

... are made of stainless steel, and are of excellent rust-proof; the sealing is employed with Teflon, could be applied extensively, and could be used for high temperature liquid and strongly corrosion liquid, ...

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: -60 °C - 80 °C

... product range includes: Filter Regulators Filters Volume booster Lock-up valves Unidirectional and bidirectional flow regulators Quick Exhaust valves Shavo's Lockup Valve retains ...

DN: 0.5, 0.25, 0.375, 0.75 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C

Isolation of instrument Venting of instrument Liquid and vapour servicePlease click view datasheet for specifications, technical drawings and ordering details.

DN: 8 mm - 100 mm
Pressure: 125, 69, 100 bar
Temperature: -38 °C - 220 °C

3-pcs. ball valve with ISO mounting top for mounting of actuator without use of bracket. Antistatic stem with pyramid segment. Maintenance free stuffing box. Available as control valve. (Option: FDA ...

Pressure: 60 psi - 100 psi

... mixing speeds and process control Stainless steel wetted parts and valve body Divorced design prevents fluid from contaminating the valve actuators Separate material ...