Stainless steel valves

DN: 50 mm - 300 mm
Pressure: 10 bar

Replaceable top packing gland enables sealing replacement without disassembly of the valve The valve is self-cleaning when opening the valve, an additional scraper is available for extra ...

DN: 0.5 in - 24 in

Gate Valves serve as efficient stop valves with flow in either direction. They are commonly used when minimum pressure drop is important. Throttling is not recommended because partially open gate valve ...

DN: 50 mm - 300 mm
Pressure: 300 psi

1.Design Standard: AWWA C515 2.Nominal Pressure: 300PSI 3.Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2PN16 or GB/T9113.1 4.Epoxy resin coating both inside & outside the body

... flapper. The surface of the site is made of hard chromium or AISI 316 stainless steel welded filling, so the surface of the site is resistant to abrasion and corrosion. Our butterfly valves ...

DN: 15 mm - 150 mm
Pressure: 40 bar
Temperature: -40 °C - 300 °C

The valve is fitted directly in the process line or on a by-pass. A constant flow through the valve guarantees a directly representative sample

DN: 200 mm - 4,000 mm
Pressure: 25, 10, 40, 16 bar
Temperature: 0 °C - 80 °C

... design. Disc to shaft connection by means of taper pin or key(optional). Self lubricating bearing in bronze or stainless steel lined PTFE reduce shaft friction and operating torque, the bearings ...

Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C

... handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral metal seated version is available with shut off capability exceeding current MASS-SP81 standards.

DN: 50 mm - 900 mm
Pressure: 16 bar - 64 bar
Temperature: -29 °C - 90 °C

... Actuated Hydraulic Control Valve for use in waterworks for pressure reducing, pressure sustaining, pressure relief, flow control, surge anticipation, level control and other control applications. The hydraulic control ...

DN: 65 mm - 150 mm
Pressure: 6 bar - 10 bar
Temperature: -10 °C - 55 °C

system ball valve, solid version space-saving wafer flange version with high-quality stainless steel bushes modular upgrading of connection possible up to flange version in DIN face-to-face ...

DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C

Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services ...

DN: 0.5 in - 12 in
Pressure: 100 psi - 290 psi
Temperature: -29 °C - 316 °C

... Body & Plug Carbon Steel, Stainless Steels, Duplex Stainless Steels, Monel, Inconel, Hastelloys, Titanium, Zirconium, etc. Sleeve PTFE, RPTFE, ...

DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C

The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve ...

DN: 10 mm
Pressure: 4 bar
Temperature: 48 °C

Front control valve in stainless steel, inlet and outlet SS tube 10x1mm, for special waters Plastic headwork TECHNICAL FEATURES Media: Special Waters Maximum ...

DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel ...

DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F

... Materials include high tensile type 316 stainless steel for the valve body and hardened 17-4PH stainless steel lower section stem. Air operators ...

DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded ...

DN: 0.5 in - 10 in

Ball valves have 4 different types of bodies: Welded: they guarantee the absence of leaks during the valve lifetime and do not require operational maintenance. This can be a very important ...

DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar

STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO FACE EN 1092-2 (ISO ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 200 °C

... WITHOUT TOOLS Description Indumart Series PVS100 Pressure Actuated Angle Seat Valves are ideal for on/off flow control of most fluids compatible with bronze or stainless steel. Tight ...

DN: 0.25, 0.375, 0.5, 0.75 in
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 130 °C

The ZFT2251B series from Dicsa has a body made out of AISI 316 Stainless Steel and a needle made out of X 10 Cr Ni S 1809. It has a PTFE antiextrusion ring and a handwheel made out of GD Al SI 12. It also has a working ...

... Specification OEM service for Valve body casting Investment Casting Lost Wax Casting Precision Casting CNC Maching Material: Ductile Iron, Cast Iron, Carbon Steel, ...

DN: 15 mm - 900 mm
Pressure: 1,600,000 Pa - 42,000,000 Pa
Temperature: -196 °C - 380 °C

Ball Valve Body materials: carbon steel, stainless steel, alloy steel WCB, LCB, CF3, CF3M, CF8, CF8M, MONEL, and more. Valve Ball type: ...

DN: 15, 25, 20, 32 mm
Pressure: 30 bar
Temperature: -10 °C - 70 °C

Pressure reducing and regulating valve with balanced seat, outlet setting from 1,5 to 6 bar, with upstream 500 micron flow filtering system, connections with ring nut and union.

DN: 15 mm - 800 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C

Side Entry Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, ...

DN: 150 mm - 610 mm
Temperature: 80 °C

... Flange Options Standard flange Custom flanges are available Material Contact Options Carbon steel, 304 stainless steel, 235 BHN abrasion-resistant steel, SAE 660 bronze