Stamping presses

Force: 2,000, 1,500, 2,500, 1,100, 800 kN
Opening: 350, 320, 540, 450, 400 mm
Stroke: 160, 300, 180, 250, 200 mm

... Mechanical Gap Frame Exclusive AIDA / Allen-Bradley Servo Press Controls ECO Power Management System AIDA DSF Direct Drive Servo Motor The AIDA DSF-C1 Direct Drive Gap Frame Servo Press marries ...

Force: 6,300, 8,000, 4,000, 10,000, 12,500 tf
Opening: 1,750, 1,100, 1,400, 1,250 mm
Stroke: 300 mm - 600 mm

... Handheld Type Precise control of your servo press at your fingertips. The answer to die set-up and try-out operations. Step Feed Mode, controlled by the handwheel, allows press operators to cycle the ...

Force: 2,000, 3,000 kN
Opening: 1,900, 2,390, 860, 1,220 mm
Stroke: 250, 300 mm

AIDA direct drive servo motor High torque, low RPM servo motor built specifically for metal stamping press applications Pneumatic safety brake Integrated with GuardLogix safety controller to engage ...

Force: 10, 50 kN
Stroke: 50 mm
Table width: 255 mm

... force is not powerful enough. With this desktop hydraulic presses you can perform processes like marking, punching, drawing, stamping, deforming, etc. They are designed for use not only as stand-alone presses but also ...

Our Four Columns Hydraulic Press solutions are equipped with the most important functions for reliable and productive forming. AMOB is an innovative designer, producer and also servicer of hydraulic presses. Innovation, ...

Force: 100, 36, 3, 15 kN
Opening: 200, 125, 75, 175 mm

aiPRESS servo presses are used to produce safe and reproduceable joinings. They offer optimal possibilities in customising the joining process to your needs. Process factors such as feed force, running speed, positioning time and accuracy ...

Force: 440 kN - 4,400 kN
Hydraulic pump power: 45 kW
Overall height: 1,050 mm

The “4400 RP” hydraulic horizontal press can be relied upon to carry out all bending and straightening tasks in heavy steel construction, vehicle construction and steel service centres. The straightening and bending process ...

Force: 15 kN
Stroke: 0 mm - 40 mm
Table width: 140 mm

... the high working pressure of the press is achieved using the toggle mechanism with a relatively low effort (approximately 150N) on the part of the user. Toggle presses are therefore used where the full force of the ...

Force: 15 kN
Stroke: 0 mm - 60 mm
Table width: 140 mm

... pressure of the press is achieved by means of the toggle lever mechanism with relatively little effort on the part of the operator. mäder manual toggle presses can be upgraded with various extras which enhance the ...

Force: 25 kN
Stroke: 40 mm
Table width: 145 mm

... the high working pressure of the press is achieved using the toggle mechanism with a relatively low effort (approximately 150N) on the part of the user. Toggle presses are therefore used where the full force of the ...

Force: 50 kN
Stroke: 250 mm
Table width: 450, 300 mm

This 50 ton C frame press is suitable for performing work involving deep-drawing, forming and stamping. Designed with an upper- and lower table with DIN-650 T-grooves. The upper table ensures a perfect ...

Force: 100 tf
Stroke: 250 mm
Table width: 400, 550 mm

This 100 ton C frame press is suitable for performing work involving deep-drawing, forming and stamping. One of our best-sellers! Designed with an upper- and lower table with DIN-650 T-grooves. The ...

Force: 100 tf
Opening: 650 mm
Stroke: 450 mm

This hydraulic C-frame press has a capacity of 100 tons with high approach- and return speeds. Suitable to carry out tasks involving deep-drawing, stamping and forming in medium and high volumes. And ...

Force: 0.5 kN - 120 kN
Opening: 66 mm - 220 mm
Stroke: 80 mm - 400 mm

... our Catalog and Diagram Download or contact us directly. Touch Panel Interface For Servo Press View and analyze process parameters and graphs; comprehensive press control at your fingertips. Compatible ...

Force: 2.5 kN
Opening: 40 mm - 180 mm
Stroke: 28 mm

Especially for small batches, a manual workstation with mechanical presses is often the most economical solution. To help you achieve your production goals, we have continuously developed the hand lever presses. Do you need a high ...

Force: 100 kN
Opening: 180 mm - 600 mm
Stroke: 50, 6, 100, 12 mm

The application determines selection of the press system. Consideration is given to the flexible design of the assembly location taking into account the ergonomic and safety aspects. These characteristics are achieved ...

Force: 0 kN - 10,000 kN

... providing efficient tools and production means. THERMOPLASTIC COMPOSITES STAMPING Our thermoplastics stamping production units feature: Hydraulic press with maximum capacity ...

Force: 10,000, 40,000 kN
Stroke: 1,500, 2,000 mm
Working speed: 1 mm/s - 70 mm/s

... manufacture state-of-the-art press systems. That is why we are proud to present you the new generation of compression press: the ECS PRESS. This multi-process press system ...

The PCC-60 features a tonnage capacity of 60 Tn, a lower bench with dimensions of 450 mm x 600 mm, and lower plate areas of 350 mm x 500 mm. This device features a between-table opening of 400 mm, 300-mm upper bench routes, and speed ...

Force: 300, 50 kN

Specifications: Stroke rate: continuously variable from 5 to max. 700 1/min. Press: nominal stamping capacity 300 kN, stroke 10 mm Slide units: max. nominal forming capacity 50 kN, max. stroke ...

Force: 800 kN

Specifications: Stroke rate: max. 200 1/min Nominal force: 800 kN Stroke range: fixed stroke with 30 mm Stroke position adjustment: - 8 mm from B.D.C. Tool mounting plate (LxW): 1000 mm x 510 mm Opening size in B.D.C.: ...

Force: 40 tf - 300 tf
Stroke: 500 mm
Table width: 700, 800, 900, 1,000, 1,200 mm

C-Frame hydraulic press suitable for stamping and sheet metal deformation. The frame of the press is monolithic and is electro-welded with internal reinforcements. The movable upper ...

Force: 100 tf
Opening: 500 mm
Stroke: 500 mm

H-Frame hydraulic stamping press for sheet metal deformation and assembly. The PST press is made with a monolithic frame, assembled and TIG welded with internal reinforcements. The ...

Force: 170, 60, 85, 125, 35 tf
Stroke: 500 mm
Table width: 700, 900, 800, 1,000 mm

Hydraulic c-frame press for stamping, drawing and sheet metal deformation. The MCL hydraulic press has an approach speed of the main cylinder of up to 125 mm/sec and is equipped with ...

Force: 400, 450, 750 kN
Opening: 265 mm - 315 mm
Rate (strokes/min): 50 p/min - 250 p/min

Our four-column presses with double knuckle-joint mod. 2G, developed since the half of the Eighties with specific experience on this field, are specially designed for using dies for progressive pressing and coining at average production ...

Force: 250, 400 kN
Rate (strokes/min): 60 p/min - 1,000 p/min
Stroke: 2.5 mm - 40 mm

OMPSA two columns presses mod. 2CN, developed since the half of the Sixties with specific experience on this field, are particularly suggested works that use small progressive dies requiring middle and high speed production. The electric ...

Force: 2,000, 1,500, 5,000, 3,500, 2,500 kN
Stroke: 250, 300, 350 mm
Table width: 750, 850, 900, 1,100, 1,400 mm

... accessories metal shell, cover plate, lighting accessories, etc. 2, metal and non-metal parts of stamping, drawing, bending, flanging, forming and other stamping processing. 3. Powder pressing of ...

Force: 2,000, 2,500, 3,500, 5,000, 1,500 kN
Max. pressure: 20, 21, 22 MPa
Hydraulic pump power: 16, 25, 31, 50 kW

... accessories metal shell, cover plate, lighting accessories, etc. 2, metal and non-metal parts of stamping, drawing, bending, flanging, forming and other stamping processing.

Force: 1,000, 1,500, 2,000, 3,000, 800 tf
Stroke: 350 mm
Max. pressure: 20, 21, 24 MPa

... block molding and pressing technology. 2. Suitable for metal and non-metal material forming, counterweight block forming, stamping and other pressing process. Technical features: 1. Excellent quality: high strength ...

Force: 20,000 kN - 50,000 kN
Opening: 2,600 mm - 4,000 mm
Stroke: 2,200, 2,600, 2,800, 3,000 mm

... High-quality parts with very thin walls can be produced. The speed profile in the stamping process is controllable. Greater flexibility in component production. Press configuration features optimized ...

Force: 1,200 tf

The molded plant tray is made of wood chips, hunting stalks, waste chemical fibers, etc., and is pressed and formed by a stamping press. Our 1200-ton plant fiber composite tray molding machine has an ...

Force: 1,250 tf
Stroke: 1,700 mm
Max. pressure: 25 MPa

... characteristics, advantages, and application areas will be introduced below. The 1250-ton hydraulic press is a new energy battery casing forming hydraulic press customized by Zhengxi Hydraulic according ...

Force: 30 tf - 250 tf
Opening: 600 mm - 800 mm
Rate (strokes/min): 600 p/min

HCT model, which is frequently preferred in single-action pressing processes, allows the workpiece to be easily assembled/disassembled and observed during the operation process, as its three sides are open. At the same time, the most ...

Force: 100 tf - 150 tf
Opening: 1,050 mm
Stroke: 300 mm - 300 mm

In addition to its adjustable down table mechanism, its t-slot table allows it to be mounted and processed on many different types of workpieces. In this way, most of the sheet metal forming operations can be done with the SAT model ...

Force: 100, 150, 50, 200 tf
Opening: 1,250 mm
Stroke: 400 mm

In addition to its adjustable down table mechanism, its t-slot table allows it to be mounted and processed on many different types of workpieces. In this way, most of the sheet metal forming operations can be done with the SDT model ...

Force: 100 tf
Opening: 1,200 mm
Rate (strokes/min): 150 p/min

... production processes and achieve maximum efficiency. Contact us for a detailed consultation and experience the future of stamping technology!

Force: 1,250 kN
Rate (strokes/min): 120 p/min
Stroke: 250 mm

The Servo Spindle Press, used as a progressive press, offers all the advantages of spindle drive technology with top-mounted motors. Specifically designed for complex processes, such as in transfer or ...

Force: 4,200 kN
Stroke: 800 mm

Stamping and forming press with 3 D — servo transfer and blank loader. Transfer press: For manufacturing of small to medium sized components Technical data: Force transmission ...

Force: 880 kN
Opening: 196 mm
Max. pressure: 250 bar

The V1.32, also known as R32, it’s the first model produced by Neotecman. The innovative design and forging system creates a new tendency in the forging industry. Today, this model still offers a very ...

Force: 980 kN
Opening: 200 mm
Max. pressure: 250 bar

PRESS PUNCHES - 3 horizontal PRODUCTION (empty) - From 500 to 3.600 parts/hour BAR DIAMETER - From 12 to 32 mm (From 0.47 to 1,26 in) BAR LENGTH - To 4.000 mm (To 2.65 lb) DIE DIMENSONS 205 x 205 mm This system ...

Force: 980 kN
Opening: 500 mm
Max. pressure: 250 bar

... series is an advanced evolution of the traditional F32 model, now featuring a fourth horizontal punch to enhance multi-stroke forging performance. Maintaining full compatibility with F32 dies, we’ve retained the same ...

... The equipment supplied includes: Blanks loading area. Heating furnace. Robot for loading of the press. Hydraulic press. Robot for unloading of the press.