Standard valves

Pressure: 0 psi - 300 psi
Temperature: -198 °C - 538 °C

The Fisher 8532 high performance Butterfly valve offers outstanding performance under extreme pressure and temperature conditions. The 8532 valve maintains tight shutoff, is available in a fire-tested ...

DN: 25 mm - 500 mm
Pressure: 10 bar - 50 bar

... actuated on/off valves. The ball valve meets ISO standards. The valve is available with threaded ends, welding ends or flanges. It is also possible ...

DN: 16 in - 24 in

Higher Pressure Rating Than Standard 56 or 75 ►► 110 PSI at 70° F - All Sizes 16” – 24” ◄◄ ►Seat Over-Tightening Protection ►Disc and Seat only Wetted Parts ►Full Engagement Non-Wetted 1-piece Stem ►Bubble Tight ...

DN: 50 mm
Pressure: 10 bar
Temperature: -20 °C

The sampling valve 125A is standard DN50 sampling valve by FAMAT. It is used for sampling of powders, granules, pastes and liquids under process conditions in the pharmaceutical, chemical ...

DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F

The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with ...

DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C

Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and ...

DN: 0.25 in - 4 in
Pressure: 2,000, 1,000 psi

... ASTM-A351-CF8/ EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Locking device, Drilled and tapped mounting pad, DIN standard M3 length

DN: 8 mm - 50 mm
Pressure: 64 bar

... actuators to DIN / ISO 5211, with parallel BSP thread to DIN / ISO 228 Housing and ball made of 1.4408. Sealing material PTFE. Internal structure analogous to A-3BVGdc. H = height of centre axis to the ...

DN: 10 mm - 100 mm
Pressure: 16, 10 bar

• Threaded seal-carrier for upstream maintenance without emptying the system. • Handle built-in tool for easy adjustment of the threaded seal-carrier (and ball torque). • “Antiblock” system that avoids ball blockage. • 100% factory ...

DN: 0.5 in - 12 in
Pressure: 175 psi
Temperature: 121 °C

... Circuit Setter Plus is a calibrated balance valve designed for pre-set proportional system balance. Since its introduction to the HVAC industry in 1968, the Bell & Gossett Circuit Setter has set the standard ...

DN: 18 in - 30 in
Pressure: 0.2 bar - 0.9 bar
Temperature: 1 °C - 42 °C

Noryl valve body,long service life,anti-corrosion,low cost. Classic piston, seal and spacer design, more reliable and less failure. High flow rate for commercial softening and filtration application. Valves ...

DN: 1 in - 6 in
Temperature: -60 °C - 200 °C

... stem •Universally applicable: many options in combination with a thick-walled PFA lining •Efficient alternative to plug valves Specifications •Design - ASME •Nominal Pressure - Class 150 •Lining - PFA •Housing ...

DN: 0.125 in - 1.25 in
Pressure: 250, 315 bar
Temperature: -15 °C - 70 °C

Cetop 3 (NG6) Flow control Valve with Bypass Check – The purpose of a flow control valve is to regulate the flow rate in a specific portion of a hydraulic circuit. In hydraulic systems, they’re used to ...

... without electronic controls. Product Details The ARV-H provides the core functionality of the industry-standard Olmsted Electro-Hydraulic valve without a complex control system. And for your convenience, ...

DN: 40 mm - 150 mm
Pressure: 16 bar

... fluctuating demand. The BERMAD 1000 is at the leading edge of control valve design, providing a valve that is free of the typical limitations associated with standard control valves. ...

DN: 25, 20, 15 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

pumping and all fluid applications Ball bib cock with nose connection Standard passage SEALS : PTFE

DN: 10 mm - 50 mm
Pressure: 136 bar
Temperature: -29 °C - 425 °C

... maximum temperature ranges from - 29°C to + 425°C. The maximum pressure is 138 bar. Forged carbon Steel gâte valve TRIM8 SW Class 800 standard bore for petroleum industry, steam, oil and gas and high ...

DN: 15 mm - 300 mm
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 100 °C

Two-way control valves with one-seat design A. Hock Series 2000 valves are our two-way control valve all-rounders. Available in both standard and more complex versions, ...

DN: 25 mm - 450 mm
Pressure: 63, 25, 40, 10, 16 bar
Temperature: -40 °C - 450 °C

Control valves type Z33 (previous name: BR33) represent one of the valve designs, where change in flow ratio is achieved through an eccentrically set rotary plug. Such structures are particularly useful ...

DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C

... pressure test is achieved before dispatch or warehousing. Our tests are conducted according ISO 5208 international standard. Fugitives Emissions Our valves are tested according TA ...

DN: 0.5 in - 2 in
Pressure: 16 bar
Temperature: 0 °C - 120 °C

Brass ball valve threaded standard port Elephant RP.BRASS.120.MM 232 PSI with electric actuated 110VAC without limit switches controls water, air, oil and other media compatible with the materials of ...

DN: 160, 120 mm
Pressure: 15 bar
Temperature: -20 °C - 120 °C

... cavitation noise generated by the main engine; 4. The intake valve integrates a relief valve, a makeup valve, and an inverse proportional valve, with standard ...

Pressure: 64, 130 bar

... Prevention of sticking-out of stem • Design of Inner Pressure-balance hole • Multiple Connection Screw Optional • Design Standard: ASME B 16.34,MSS SP-110 • Thickness: EN 12516-3 •Connection Screw: IS0228/1, DIN2999/259. BS21, ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 60 °C

... diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The chemical resistance of the valve is subject to the type of fluid, the temperature, the pressure, ...

DN: 100 mm - 1,200 mm
Temperature: -100 °C - 550 °C

... bubble tight shutoff. For flanged end valve, the shaft is positioned at the flange side which reduced the possibility of external leakage caused by the ambient temperature changed. Specifications: VALVE ...