Steel check valves

DN: 50 mm - 500 mm

Cl. 150-300 FLANGED CHECK VALVE TRIM 8 Description •Body in Carbon steel ASTM A216 WCB or Stainless steel CF8M •Class 150-300 •Standard: API 6D •Face to face ...

DN: 50 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C

... sure to install a minimum of 5 x nominal diameter of straight pipeline in front of and behind the dual plate check valve. Do not install the valves directly onto a pump flange.

DN: 6 mm - 40 mm
Pressure: 350 bar
Temperature: -20 °C - 100 °C

SAE J 514 / ISO / DIS11926-1 Female thread Panel mounting kit

DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 200 °C

... sight glass Large optional lining materials Swing Check Valve design available Flange dimensions - DIN EN 558-10 Face to face dimensions - 5 mm lining, Available as Ball Check ...

DN: 15 mm - 150 mm
Pressure: 0 bar - 10 bar
Temperature: -4 °C - 200 °C

Fully lined Ball Check Valves for safe non-return flow control of corrosive process media. Typical installations are in front of pumps, as overflow protection for liquids and in venting applications. Main ...

DN: 2 mm - 16 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C

Our check valves are available as screw-in or case valve models. Both models are available with the screwing-in direction blocked or with the screwing-in direction open for flow. The ...

DN: 0.5 in - 42 in

... Bidegain we manufacture non-return valves, also known as a check valves, from the complete kit to the independent components, always ensuring the highest levels of quality and optimal ...

DN: 50 mm - 300 mm
Pressure: 10, 16 bar

STANDARDS OF MANUFACTURE EN 1074-1 VALVES FOR WATER SUPPLY EN 1074-3 CHECK VALVES EN 558 S48 (ISO 5752) (DIN 3202 F6) FACE TO FACE EN 1092-2 (ISO 7005-2) DRILLING FLANGES MATERIALS BODY ...

DN: 50 mm - 750 mm
Pressure: 285 psi - 3,705 psi
Temperature: 100 °F

Class 150 Cast Carbon Steel Globe Body Silent Check Valves Size: 2 to 30 in. (50 to 750mm) Description: Designed for liquids and gases where flow reversal can cause surge and water ...

DN: 0.25 in - 1.5 in
Pressure: 0 bar - 350 bar
Flow rate: 12 l/min - 310 l/min

The FPR series, manufactured by Dicsa, has a body that has been constructed out of steel. It also has a cracking pressure of 0.5 bar.

DN: 50 mm - 1,200 mm
Pressure: 16 bar - 260 bar

Valve Type: Wafer Check Valve Check Valve Body materials: carbon steel, alloy steel and stainless steel Manufacturing ...

DN: 10 mm - 100 mm
Pressure: 10, 12, 16, 25, 40 bar
Temperature: -20 °C - 100 °C

Full bore check valve, F/F threaded. Temperature range: -20°C +100°C

DN: 1 in - 28 in

... any exterior. Materials: Hot-rolled or cold-rolled steel, stainless steel, aluminized stainless or custom request. Sizes: Diameters range from 1" up to 28" per Mercury ...

DN: 0.5 in - 12 in

API 6D Lift Check Valve Manufacturer: Lift Type Check Valves, BS 1868, API 6D, BS 5352, ISO 15761, 1/2-12 Inch, Class 150-2500 LB, BW, SW, Threaded End. Lift check ...

DN: 40 mm - 900 mm
Pressure: 10 bar - 160 bar

Bolted Bonnet or Pressure Seal Bonnet Coating: Standard Paint Coating Design Prohibits Galling or Scoring of Seating Surfaces Large-sizes Are Provided With Lifting Rings for Easy Hoisting One-Piece Disc Construction ...

DN: 15 mm - 1,200 mm
Pressure: 1 MPa - 42 MPa
Temperature: -196 °C - 540 °C

The swing check valve, also known as a one-way valve or a check valve, is used to prevent the backflow of the medium in the pipeline. The valve ...

DN: 10 mm - 100 mm
Pressure: 12, 16, 25, 40, 10 bar
Temperature: -10 °C - 150 °C

Full bore check valve, F/F threaded, Viton® seat suitable for application with not halogenated hydrocarbons and fuels (gasolines, kerosene...).

DN: 15 mm - 200 mm
Pressure: 9.6 bar - 40 bar
Temperature: 50 °C - 400 °C

Power Station Check Valve Quick Details: Model NO.: H44 Flow Direction: Unidirection Standard: ANSI Application: Industrial Usage, Water Industrial Usage, Household Usage Characteristic: ...

DN: 2 in - 36 in

... Globe Valves – Y-Pattern, Standard & Bellow Seals Swing Check – Wafer Check Valves, Dual Disc, Tilting Disc Piston Check – Ball Check ...

DN: 8 mm - 150 mm
Pressure: 16 bar - 64 bar
Temperature: -196 °C - 300 °C

Design ANSI B16.34,API6D,BS5351,DIN3337 Body Material Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel.etc. NACE MR-01-75/NACE MR-01-03 ...

DN: 18 in - 56 in
Temperature: 780 °C

... The body of the valve is made of SA 516 Gr70 carbon steel or 304H stainless steel. IMI Remosa however, will meet any customer request for different body or internal materials. The ...

DN: 2, 3 in
Pressure: 3,000 psi - 15,000 psi

... standard. • The valve is casted by hard alloy steel and adopts union. Check Valves are installée! in high pressure lines to stop reverse flow by the automatic close ...

DN: 100 mm - 1,400 mm
Pressure: 10, 16, 25 bar

Ideally suited to be used as a backflow prevention valve in water/wastewater treatment,marine,pump  station and other general industrial applications. • Designed in accordance with the requirements of EN593. • Face ...

ERK Tilting Check Valve The ERK tilting disc check valve is the result of more than 50 years of experience in building and use of tilting-disc check ...