Structure hoses

Inner diameter: 6.7 mm - 25.4 mm
Outer diameter: 9.6 mm - 32.2 mm
Pressure: 50 bar - 88 bar

... 910. The hose features a smooth bore, externally convoluted, carbon impregnated, anti-static PTFE liner, wrapped in a Stainless Steel braid. In addition to the 711 crimp and 4000 series crimp/draw swage fittings, ...

Inner diameter: 5 mm - 102 mm
Outer diameter: 11.2 mm - 115 mm
Pressure: 30 bar - 400 bar

The structure of rubber hydraulic hoses consists of many layers. The types and functions of these layers are as follows; 1. Inner Rubber Layer It is produced by pulling synthetic rubber paste. It ...

If permanent and, above all, rigid connections are to be realized in hydraulics, piping is used. In our Product of the Month September, we show you the optimization of a customer-specific pipeline. The starting point was a curved pipeline ...

... high-pressure hoses consist of an inner hose made of PTFE, PFA, ETFE or Zytel. The braiding is made of a single or double layer of stainless steel, with an additional Kevlar braid and PTFE foil for extreme ...

Inner diameter: 6 mm - 25 mm
Outer diameter: 16.5 mm - 40.1 mm
Pressure: 0 bar - 420 bar

... Four spiral high pressure hoses according to EN 856 4SP standard for hydraulic systems with a rated pressure up to 380 bar. Universal high pressure hoses for high pressure hydraulic systems. A long service ...

Inner diameter: 650 mm - 1,000 mm
Outer diameter: 1,260 mm - 1,800 mm
Temperature: -30 °C - 80 °C

Floating Hose for Dredger Application: Used for port、 dock、 seawater、 silt、 sand 、discharge flood，oil transportation etc. particularly suited to the work of another large storm water construction. Characteristics: ...

Inner diameter: 50 mm - 900 mm
Temperature: -120 °C - 400 °C
Delivered length: 2 m - 10 m

... of sizes, including diameters bigger than 300 mm. Ducting hoses are extensively used for suction (under vacuum) but also as delivery hoses (under pressure) to blow air or gases. The ducting hoses ...

Inner diameter: 4 mm - 16.1 mm
Outer diameter: 6 mm - 19.5 mm

ATEX Flexible Metal Conduit - Structrue: Interlock - Material: Stainless Steel - Surface Finish: white PVC coating - expecially recommending the ATEX flexible metal conduit for the wiring protection ...

Inner diameter: 40 mm - 400 mm
Pressure: 0.01 bar - 0.55 bar
Temperature: -20 °C - 110 °C

Made in PVC coated polyamid tissue with steel wire spiral between 2 layers of tissue • Extremely flexibleand light hose. • Length compressed by 90% • -20C+110C • Working pressure: 0,01bar-0,55bar(acc.to diam) ...

Inner diameter: 3 in - 20 in
Temperature: -65 °F - 300 °F

... Extremely flexible & compressible Flame retardant to UL 94V-0 Ideal for low temperature fume control applications Non-marking thermoplastic rubber clip cover protects the helix & the equipment that is ...

Inner diameter: 20 mm - 120 mm
Outer diameter: 30 mm - 140 mm
Pressure: 2 bar - 7 bar

Structure : Flexible hose made out of soft phthalate-free food-grade PVC wall in accordance with the modified EU regulation 10/2011, reinforced with steel helix coated in PVC (creating ...

Inner diameter: 38, 25, 32 mm
Outer diameter: 39, 45, 28 mm
Pressure: 1.5 bar

Flexible profile hose from a modified TPO with integrated cuffs Material: TPO Colour: Blue Roll lenght: up to 100,5 meters (Integrated double cuffs each every 1,5 meters) Applications: Cleaning ...

Inner diameter: 6.3 mm - 25 mm
Outer diameter: 13 mm - 34.5 mm
Pressure: 24, 21, 28, 20 bar

... Its internal tube has been manufactured out of specialized NBR rubber materials tolerant to hydraulic oils, while its external housing has been made out of synthetic rubber retardant to weather, abrasion, and oil elements. ...

Inner diameter: 18.2 mm - 100 mm
Outer diameter: 34.9 mm - 120.7 mm
Pressure: 0.4 MPa - 2.1 MPa

This section covers hose for use in low pressure and vacuum applications with petroleum base hydraulic fluids within a temperature range of -40°C~+100*c (-40°F212 F) . This hose shall consist of an ...

Inner diameter: 19 mm - 102 mm
Pressure: 5 bar - 20 bar
Temperature: -30 °C - 90 °C

Flexible Cloth Braided rubber hose is generally composed of inner rubber layer, middle rubber layer, braided layer (cotton braided layer or steel wire braided layer, etc.) and outer rubber layer, fiber ...

Inner diameter: 2 mm - 12.5 mm
Outer diameter: 4 mm - 15 mm
Temperature: -20 °C - 80 °C

These spirals are made with inner tubes of different color. The exterior covering is in BLACK POLYURETHANE. Technical-constructive features: PA12 PHL twin spirals: plasticized polyamide 12, heat and light stabilized. Reduced moisture ...

Inner diameter: 8.2 mm - 22 mm
Outer diameter: 15.2 mm - 33 mm

... environmentally safe air conditioning hose and coupling solutions built to resist heat, moisture, and ozone corrosives to maximize the system longevity. Hose Construction: Usually, A/C hose ...

Inner diameter: 1.5, 2, 2.5, 3 in
Outer diameter: 2.1, 2.61, 3.13, 3.66 in
Pressure: 250, 200 psi

... corrugated version of 4700, designed to offer added flexibility. Novaflex 4704 UHMW is a corrugated chemical suction & discharge hose. Construction: Tube: Clear Ultra High Molecular Weight polyethylene. Reinforcement: ...

Inner diameter: 6 mm - 25 mm
Outer diameter: 13 mm - 36 mm
Pressure: 20 bar

Tube: EPDM/SBR blended, black and smooth Reinforcement: textile braided high tensile synthetic yarn Cover: EPDM/SBR blended, blue, smooth weather and ozone, abrasion resistant

Inner diameter: 32 mm - 200 mm
Outer diameter: 40 mm - 214 mm
Pressure: 0.42 bar - 2.52 bar

100% translucent polyurethane polyester, stainless steel wire without halogens or plasticizers. Product highlights Extraction and transfer of powder, dust High resistance to UV and ozone, with a small bend radius and great ...

Inner diameter: 6, 9 mm
Outer diameter: 13, 16 mm
Pressure: 0 bar - 20 bar

Autogenous hose for acetylene, EPDM/SBR, red, Temperature range -20 °C to 60 °C, Hose Ø 13x6, PN max. 20 bar, Roll of 40 m Proven, flexible design acc. to DIN EN ISO 3821:2010 with ...

Inner diameter: 5 mm - 25.4 mm
Outer diameter: 8.2 mm - 30.3 mm
Pressure: 80 bar - 240 bar

Swage Ferrule: PF-PTFE - Category 2.8 With flat, thick PTFE-Tube (Heavy Wall) Reinforcement: One Braid of Stainless Wire - AISI 304 Max. Operating Temperature: -60° to +260°C The working pressure apply to working temperatures from +20°C to +50°C.

Inner diameter: 6 mm - 50 mm
Pressure: 3 bar - 20 bar

Garden hose This product has bright color, light weight, high pressure resistance, good weather resistance, soft, elastic and easy to move. It is an ideal corollary product for garden watering. Bright color,light,flexible ...

Inner diameter: 0.24 in
Outer diameter: 0.38 in
Pressure: 1,421 psi

About our Flexible Metal Hose Corrugated, annular, flexible 321 or 316L stainless steel hose with a 304 over-braid Manufactured with state-of-the-art technology in a ...

... can offer a range of breathing air solutions such as: 100% PVC products, Multi-layer hose, such as Hytrel® lined PVC, Polyurethane (like some surface diving hoses) These products can be designed ...