Submersible pumps

Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being ...

Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW

Immersion Pumps Our multistage pump models (S)TC25...(S)TC460 have been especially developed to supply internally cooled tools with coolant fluid. Closed impellers provide optimal hydraulic ...

Flow: 0 l/min - 90 l/min
Head: 0 m - 270 m
Power: 0.48 kW - 4 kW

Immersion Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures ...

Flow: 40 m³/h - 800 m³/h
Pressure: 3 bar - 40 bar

... Standard industrial pump range has a very high efficiency and very low NPSH. All pumps in this series are robust and easy to maintain. There are pump models in modular concept, composed ...

Flow: 0 m³/h - 800 m³/h
Power: 0 kW - 90 kW

The Packo submersible pump series IM are available in cantilever execution up to 0,5 m length but they are also available in an execution with support bushing till 1,5 m length. Particularly suitable ...

Flow: 0 m³/h - 1,000 m³/h

... Packo submersible cantilever pump series IML are designed for installation in a sump or tank, having only the casing and impeller submerged. Because the absence of a mechanical seal and slide bearing ...

Pressure: 230,000 Pa
Power: 0.55 kW

Submersible Turbine Pump (Read Jacket) 1. The simple oil pump oil circuit design minimizes the pressure loss of the oil at the pump port and maximizes the effective ...

Pressure: 27.6 bar
Power: 5.5 kW
Fluid temperature: -32 °C - 107 °C

LWB-150 LPG turbine pump is applicable to aboveground or underground LPG tank at high differential pressure. Advantage An economical and high-efficient alternative to submersible pump Meeting ...

Pressure: 27.6 bar
Power: 5.5 kW
Fluid temperature: -32 °C - 107 °C

LWB-150 LPG turbine pump is applicable to aboveground or underground LPG tank at high differential pressure. Advantage An economical and high-efficient alternative to submersible pump Meeting ...

Flow: 15 l/min - 800 l/min
Pressure: 100 bar - 210 bar
Head: 10 m

... fluids SP20 is a compact and powerful immersion pump designed for handling trash, muddy waters and for heavy fluids in general.Compact and light provides a flow rate up to 800 L/min ...

Flow: 15 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 45 m

... run dry without damaging it •The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber •Can be operated by small power packs or by the hydraulic ...

Flow: 10 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 40 m

... The pump housing can be open in few minutes without tools, for inspection of the impeller and the pumping chamber 38 L/min @ 140 Bar 30 L/min @ 140 Bar 20 L/min @ 140 Bar • Can be operated by small ...

*CV-series are designed for solid handling submersible pumps, enclosed with vortex impeller with spherical clearance 35mm and 56 mm are ideal for pumping sewage, wastewater and fibrous solids. *Motors ...

Flow: max 560.0 m³/h
Pressure: 0 bar - 12 bar

Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign ...

Flow: 11 m³/h - 400 m³/h
Head: 7.6 m - 50 m

　　TZJL pumps are vertical type, the product is fixed above the slurry pool by the mounting plate, only the pump head is dipped in the slurry liquid, bearing and supporting parts are all above the pool, ...

Flow: 10 l/min

... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction ...

Flow: 20 l/min

... air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated ...

Flow: 4 l/min - 30 l/min

OTAL container pumps are characterized by its basic stopper system that can be used in most common containers. During the pumping process, only the tube comes in contact with the liquid. This means that liquids that are ...

Flow: 0 l/min - 80 l/min
Pressure: 1 bar - 7 bar
Head: 0 m - 70 m

VP Vertical regenerative turbine electric pumps Hydraulic Performace Brass single stage vertical electric pumps with submerged regenerative impeller, ideal for maintaining the working pressure in open ...

Flow: 10 l/min - 130 l/min
Pressure: 0.2 bar - 0.8 bar
Head: 1 m - 8 m

... motor 230V/50Hz with incorporated thermal protection with automatic reset. MWater cooled motor with top discharge protects the pump from overheating even when partially submerged. Liquid temperature in continuous operation ...

Flow: 10 l/min - 170 l/min
Pressure: 0.1 bar - 0.7 bar
Head: 1 m - 8 m

Submersible drainage electric pumps Characteristics Single-phase motor 230V/50Hz with incorporated thermal protection with automatic reset. MWater cooled motor with top discharge protects the pump ...

Flow: 5, 2.7, 1.3, 0.9, 2 m³/h

... Semi-rotary manual pumps equipped with flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: brass Waterproofing: by graphite braid. NBR flange O-ring, ...

Flow: 0.9, 2, 1.3, 2.7 m³/h

Semi-rotary manual pumps equipped with a flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: brass Waterproofing: by nitrile O-ring. NBR flange ...

Flow: 1.3, 2 m³/h

Semi-rotary manual pumps equipped with a flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: zamak Waterproofing: by nitrile O-ring (not suitable for ...

Flow: 0 m³/h - 15.6 m³/h
Head: 0 m - 16 m
Power: 1.1 kW

CTV 25-11 PLASTIC CTV 25-11 is a 1" vertical pump in PP or PVDF with 1.1 kW motor, capacity of 15.6 m3/h and max head of 16 m. Performance curve The performance curves are based on water at 20°C. Other circumstances ...

Flow: 19, 34 m³/h
Head: 2 m
Power: 1.5, 2.2 kW

CTV 40-12.5 STAINLESS CTV 40-12.5 is a 1 1/2" vertical pump in stainless steel AISI 316 with 1.5-2.2 kW motor, capacity of 34 m3/h and max head of 22 m. Performance curve The performance curves are based on water at ...

Flow: 14, 13 m³/h
Head: 11.5 m
Power: 0.48 kW

... has a smart design bottom plate that enables the pump to operate and drain down to 1 mm water level. The pump is equipped with a swing valve that prevents reverse flow from discharge hose when the pump ...

Flow: 7, 12, 9 l/min
Head: 3, 5, 8 m
Fluid temperature: -40 °C - 100 °C

... precision laboratories that meet the CNAS national laboratory accreditation standards ♦ More than 60+ patents in the micro water pump industry, strong research and development strength, and master advanced ...

Flow: 0 l/min - 6.5 l/min
Head: 2.5 m
Power: 5.16 kW

... dispenser For more product & factory information, please contact info@topsflo.com http://www.topsflo.com/brushless-dc-pump/24v-dc-water-pump-tl-b03h.html

Flow: 4.5, 6.5 l/min
Head: 2.5, 1.5 m
Power: 4.8, 5.16 W

design features micro centrifugal pumps powered by brushless DC motors. They are designed to be quiet, compact and lightweight. A variety of features, including a seal-less design to ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 Pa - 800,000 Pa
Head: 0 µm - 200,000,000 µm

... External, single, or double flushing ​ FRP accessories to empower or adapt the pump to any plant Flanges reinforced in Kevlar (more resistant) On request: chance to choose pump colour Applications Aquarium, ...

Flow: 0 m³/h - 275 m³/h
Pressure: 8 bar
Head: 0 m - 90 m

K2 series comprises long vertical sump pumps with external electric motor and baseplate available in 3 sizes. Process sump pumps for aggressive liquids 3 versions according to the performance and ...

Flow: 2 m³/h - 50 m³/h
Pressure: 8 bar
Head: 0 m - 40 m

... bottom and outlet pipe at the top. These pumping solutions ensure a longer life cycle and less maintenance operations. Compact sump pumps HME version: cantilever shaft with column length: 274mm or ...

Flow: 7 m³/h
Head: 7.5 m
Power: 300, 130 W

... mounted compact float switch (fits into pipes with an inner diameter larger than 250 mm) protection grade IP 68 – fully submersible Application pumping of clear water and waste water from pits, ...

Flow: 5.5 m³/h
Head: 7 m
Power: 300, 160 W

... integrated non-return valve puddle pump FSP 330 with ENS 1.1 fits into pipes with an inner diameter larger than 200 mm protection grade IP 68 – fully submersible Application portable ...

Flow: 7 m³/h
Power: 130, 300 W
Fluid temperature: 40, 90 °C

... mounted compact float switch (fits into pipes with an inner diameter larger than 250 mm) protection grade IP 68 – fully submersible Application pumping of clear water and waste water from pits, ...

Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m

... controlled by CM control module. - Multistage pump made of AISI 304 stainless steel. An inverter allows 4HS to: - Change pump speed to maintain set-pressure regardless of water demand. Consequently ...

Flow: 0.5 m³/h - 8 m³/h
Head: 10 m - 60 m
Power: 800 W

... the pumped water. The flow rate is directly proportional to pump speed while the pres-sure supplied is kept almost constant. In this way, unlike a centrifugal pump, the helical rotor pump ...

Flow: 0.5 m³/h - 3 m³/h
Head: 20 m - 100 m
Power: 1.3 kW - 3 kW

4HS MultiPower pumps (4HS MP), powered by renewable energy sources, is a new range coming from the 4HS pumps with built-in inverter. 4HS MultiPower pumps can be powered by AC or DC ...

Hand pumps for canisters Order-number: 10054 Details Hand pump for canisters up to 30 I -material: plastic, polypropylene and polyethylene -food-safe -double-action -outlet tubes ...

Flow: 30 l/min

Electric pump 12 V, 30 l/min Order-number: 8640 Details Diesel pumps, accessories for UNI- and MULTI-Tank -light and robust construction -also for continuous operation -simple handling due to ...

Flow: 20 l/min
Pressure: 0 bar - 1.1 bar
Power: 220 W

Submersible pump CENTRI SP 30, Pump Set - low-cost entry-level solution - low-wear centrifugal pump - electric motor 12 V, max. 20 A - version with power pack for ...