Suction pumps

Flow: 400 m³/h
Pressure: 48 bar

DV vertical pumps are designed to accomplish easy fluid suction from wells, cisterns, barrels and tanks. Their reduced dimensions and partial immersion design reduce the negative head. Different cone ...

Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m

... impeller radially split volute, horizontal, centerline mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump ...

Flow: 156 m³/h - 960 m³/h
Head: 19 m - 53 m
Power: 22 kW - 110 kW

... similar debris and then transferring it over considerable distances.They are ideal for a wide range of dredging, mineral extraction and industrial cleaning operations.

Flow: 2 m³/h - 400 m³/h
Pressure: 1.6 MPa
Fluid temperature: -20 °C - 120 °C

... submersible pump includes single stage,single suction,volute casing vertical long-shaft submersible pump.It is designed according to ISO2858 Standard,and complies with 《Technical requirements ...

Flow: 0 l/min - 620 l/min
Head: 27 m
Power: 3.5, 3.1 kW

... Low Vibration Comfortable in use after reducing engine vibration. (3) Guaranteed performance Koshin guarantees 8 m suction lift and specifications.

Flow: 4 m³/h
Head: 0 m - 40 m
Power: 900 W

... multi-stage, horizontal centrifugal pump High efficiency Suction and pressure connectors, internal thread (1“ - 1¼“) CPS SM with ON/OFF-switch CPS GG / SM: Grey-cast iron suction ...

... rotor in the stator, the seal chamber moves axially from the inlet end of the pump to the outlet end, so that the medium in the seal chamber can be transported through the pump.

The (XY)SPR submerged pump is a vertical centrifugal slurry pump, suitable for conveying abrasive or corrosive material. The pump is generally immersed in a pool or pit to work. XY)SPR ...

Flow: 90 m³/h - 3,780 m³/h
Head: 15 m - 130 m
Power: 11 kW - 800 kW

... sand dredging slurry pump 1.Product Description Our pump is mainly used as an accessory device of excavator, in the case of more water, silt, sand, mortar is less conducive to excavating and inconvenient ...

Flow: 0 m³/h - 156 m³/h
Head: 0 m - 90 m
Power: 1.5 kW - 22 kW

... have threaded ports near suction and delivery flanges for installing suction and discharge pressure gauges. The pump shall also have a threaded drain port at the bottom of casing for ...

Flow: 180 m³/h
Pressure: 10 bar
Head: 72'00"

... fish, etc. RV pumps are widely used in wineries for the pump-over process where the high capacity and minimum destruction of the solid parts (seeds, skins, etc.) is required. The design of the pump ...

Flow: 0 m³/h - 9.6 m³/h
Head: 20 m - 79 m
Power: 1.1 kW - 2.2 kW

... recommended that these pumps are used to carry only chemically pure liquids and free of foreign matters, with temperatures not higher than normal room temperature. PUMP: Monobloc horizontal axis pump ...

Flow: 2 m³/h - 29 m³/h
Head: 0 m - 13 m
Power: 0.84 kW - 1.85 kW

... outside buildings. The motor jacket cooling makes the pumps particularly suitable for submerged operation. A special thermal protection ensures that the pumps are not damaged even when running dry. The ...

Flow: 1.5 m³/h - 100 m³/h
Power: 3 kW - 63 kW
Fluid temperature: 50 °C

WQX series of bottom suction sewage pumps are suitable for pumping sewage and sludge in any severe environment. This series of pumps are bottom suction type, which ...

Flow: 0 m³/h - 30 m³/h
Head: 1.5 m - 20 m
Power: 0.45 kW - 2.2 kW

... or emptying tanks ■ Extraction of water from ponds, streams or pits and for rainwater collection FOR CLEAN WATER, SOLIDS UP TO 10 MM ■ Containing solids up to 10 mm grain size ■ Single-impeller submersible drainage ...

Flow: 20 m³/h - 125 m³/h
Pressure: 16 bar
Head: 20 m - 125 m

... basis of my country's digestion and absorption of foreign oil pumps , The basic structure is a single-stage single-suction cantilever foot support structure, the inlet of the pump is ...

Length: 500, 700, 1,000, 1,200 mm

PUMP TUBES FOR LABORATORY PUMPS For conveying small quantities made of polypropylene and stainless steel Suction tubes for conveying neutral and slightly aggressive ...

Flow: 3 m³/h - 1,200 m³/h
Pressure: 16 bar
Head: 4 m - 160 m

... dismantle the pump body and pipeline FEATURES AND ADVANTAGES Stable opération and stable structure. Convenient maintenance. Low noise Features •Adopt Pull-back structure, avoid dismantling pump ...

Flow: 12 m³/h
Pressure: 16 bar
Head: 160 m

RACM pumps Use Single or Multistage side-channel self-priming pumps with radial impellers. They are fit to handle clean liquids with no suspended solid matter and can be used for boilers feeding, surge ...

Flow: 0 us gal/min - 1,400 us gal/min
Pressure: 0 psi - 150 psi
Head: 0'00" ft - 295'00"

... Submersible single stage centrifugal pump. Pumping of abrasive and corrosive liquids All hydraulic components which are in contact with the liquid are made of SICcast Suction flange: Vertical (including ...

Fluid temperature: 0 °C - 120 °C

... function properly and pumps particles up to 1/8 inch in diameter. • The AP4+ air valves can pass 90 weight oil without fouling. • Able to pump products with a specific gravity as low as .72 ...

Flow: 0 m³/h - 110 m³/h
Head: 0 m - 70 m

Application Fitter press feeding. Dyes & Intermediates, Slurry transfer Cake transfer, ETP Plant. Sugar & Food Industries

Flow: 0 us gal/min - 160,000 us gal/min
Head: 0 m - 500 m

Double Suction Pumps Single-stage, horizontally or radially split pumps using a double suction impeller. Features a rugged design that is particularly suited for hazardous, ...

Flow: 315 l/s
Head: 180 m
Power: 0.25 kW - 200 kW

ApplicationsHVAC-system pumping; light industrial/ process pumping DescriptionThe Armstrong 4030 horizontal end-suction (ES) pumps are engineered to substantially reduce cost over competitor designs ...

Flow: 0 m³/h - 130 m³/h
Head: 0 m - 650 m
Power: 7 kW - 160 kW

... engineering Delivery of hot water in boiler sytems Recovery of condensates (water) Further applications Extraction of palm-oil Advantages Pump for high pressure ratings and large volumes Robust ...