Supports

BFH Series timetable holders are designed for fixing timetables and other printed documents on driver’s desks of locomotives or traction units. The clamping yokes can be unscrewed and mounted in two different positions. Features - ...

The STFP5P bracket, made of hot-dip galvanized steel, is the ideal support for the Pal5L to be installed on bridges at the installation point of the hydrological monitoring station. The fixing, suitably sized, is done ...

On/Off magnet track mounting devices are used to mount either Rigid Track or Flex-Kat tracks on ferrous surfaces. Gullco's Vacuum Track Mounting system, described in a separate bulletin, holds Kat Tracks in position on ...

Holds formed "rings" of track in position for pipe welding on nonferrous and ferrous materials. Heights can be adjusted from 2.8" (71.1mm) to 4.95" (125.7mm). Different heights can be achieved using different length 5/16"-18UNC bolts.

Holds formed "rings" of track in position for pipe welding on nonferrous and ferrous materials. Heights can be adjusted from 2.8" (71.1mm) to 4.95" (125.7mm). Different heights can be achieved using different length 5/16"-18UNC bolts.

... engine of the vehicle, steel beam, foot blocks, rubber supports, chains and hooks • The brackets bring rubber so that it does not damage the paint of the vehicle • The engine mount ...

... INAIL safety device and accessory holder (Ex ISPESL) allows you to gather all the safety and control devices which must be installed in thermal power stations with a power above 35 kW. INAIL safety device holders ...

... Transducer Holder (with and without probes) The Ultima Transducer Holder for the Bowers Ultima electronic bore gauge is available with or without probes. Product Description Available in a variety ...

The STEGOFIX PLUS device holder is a flexible alternative to the 35 mm DIN rail. It enables quick and easy installation of small or additional devices that are designed for fixing on DIN rails. The STEGOFIX PLUS is suitable ...

... two that are fixed and two that are swivel casters with braking capability for securely locking the stand in place. Floor levelers enable leveling the stand if necessary once it has been positioned for ...

... sectional block allows to support bars with thickness 5mm, 6mm, 8mm e 10m, by rotating it opportunely and using the desired face. The fixing support is in polyester reinforced with fiber glass (130°C) ...

... to rugger supporting raceways. Available in 4 different versions, represent the solutuion to the various problems of bar support. By changing the distance between tha small blocks on yhe supporting raceway it's possible ...

Innovalia Metrology manufactures 2D and 3D ball artifacts up to 1.5m corner to corner spacing, to perform extremely fast interim checks of CMMs, equipped with contact systems and optical systems.

... mounted components. The posts can be rotated 360°withoutchanging their height. All the posts are of stainless steel. The holders canbe mounted on magnetic bases (GCM-42), magnetic plates (GCM-43),breadboards (GCM-30), ...

This series support mounts belongs to the bottom support device of the cage system structure. It uses for firmly connecting the standard support rods of 30mm pitch with ...

This series mounts belongs to the cross-border connecting device of the coaxial optical path system structure. It is used to install the special optical and optoelectronic components into the 30mm cage system. GCT-020301 ...

IMADA SDT series is rotating supporting stand jig with 5N-m (500N-cm) capacity for torque gauge DTXS/A series. With its knob, it enables continuous rotation of samples, which is difficult by hand. Combine it with IMADA ...

Sensor Holder SHT-5N is designed to hold the sensor of torque gauge HTGS/HTGA series. It is a simple torque test stand which ensures stable torque measurements. Combine it with a torque gauge HTGS/HTGA series and ...

RSH series is rotation support jig with 5N-m (500N-cm) capacity for torque gauge HTGS/A series. It is designed to help measure torque in the horizontal direction and enables you to rotate the samples more than 360 degree ...

... Features an angle adjustment to optimize the viewing angle. Note: For indicator positioning only. It should not be used to support a force gauge or torque sensor in a load-bearing application.

Flexible adjustment for single-sided climbing All PASCHAL formwork systems can be mounted on the dam bracket Robust design for economical bracket spacing and cycle heights Formwork can be tipped ...

... size of cell is larger, the requests about holder for large cell that is easy to operate and no affected by the metal pollution are submitted to us more than ever. We will introduce here about our new holder ...

mpact- ans shock resistant,protected installationSimple adjustmentvia slotted holesMount and replace sensorquickly and precisely Inductive proximity switches EGE offers special inductive proximity switches for special applications. ...

For KD 305 - KY 305 - FR 222 - KM 212- AZ 130 - TM 135 - PP 110 - PY 100 - PY 101- PY 102-PY 104 models.