Voltage: 1.8 V
... application at datarates of up to 2.5Gbps in D-PHY. The device compensates for PCB, connector, and cable related loss and switching related loss to provide the optimum electrical performance from a CSI2/DSI source to ...
Diodes Incorporated
Voltage: 100 V
Current: 20, 30 A
Power: 2,000 W
... The MSA240 is a complete PWM amplifier including an oscillator, comparator, error amplifier, current limit comparators, a 5V reference, a smart controller, and a full-bridge MOSFET output circuit. ...
Apex Precision Product
Current: 25, 50 A
ROPEX boosters can be used as external switching amplifiers in addition to the temperature controller. They allow a higher current to be present on the primary side of the current transformer. Two different ...
Voltage: 12 V - 14 V
Power: 100, 150 W
... cable as well as for delayed switching of HF-linear amplifiers. The sequential operation of the DCW 2004 B avoids reliably damage to the preamlifier that may be caused by HF-spikes during switching. ...
Voltage: 85, 100 V
Power: 120 W
Frequency: 40 Hz - 16,000 Hz
... backup mode of 4-main-1-standby, 5 amplifier boards * Support the real-time indication of the working state of the amplifier board * Support automatic switching of amplifier ...
Voltage: 3.3 V
Current: 5.6 mA
Frequency: 22 GHz - 29 GHz
The LNA_024_005 is a particularly low-noise amplifier IC developed for high-frequency applications in the K-band. It is an improved version of our LNA_024_004 in terms of functional reliability. Design specifications ...
Silicon Radar GmbH
... inverter module with screw connection inverts the signals of ground switching NPN transistor outputs into positive switching PNP outputs, as well as signals from PNP into NPN switching signals.
Voltage: 12 V - 30 V
Frequency: 100 Hz
Dimension 10.5 x 45 x 75.5 mm Connection Cable, 2.00 m, PUR Switching output PNP/NPN NO/NC programmable Housing material PBT Ambient temperature -10...70 °C Approval/Conformity CE UKCA cULus WEEE IP ...
Voltage: 15 V - 30 V
Frequency: 100 Hz
Dimension 10.5 x 45 x 75.5 mm Connection Cable, 2.00 m, PUR Switching output PNP/NPN NO/NC programmable Analog output Analog, voltage/Analog, current 0…10 V/4…20 mA Housing material PBT Ambient temperature -10...70 ...
Voltage: 10 V - 30 V
Dimension 15 x 36 x 61 mm Interface PNP normally open/normally closed (NO/NC) Display Output function- LED yellow LED green: Power Error - LED green, flashing Signal strength - segment display Setting Sensitivity (Sn) Light-on/dark-on Teach ...
Voltage: 110 V - 240 V
Current: 4 A
Power: 11 W
• - One- or two-channel design • - Relay or transistor outputs • - Small design requiring only very little space for control panel mounting • - Quick and easy mounting
Voltage: 10 V - 30 V
Current: 2 A
Power: 1 W
... Country of origin - DE Weight - 170 g Technical Data Signal type - Digital input Device type - Isolating switching amplifier Ex version - yes Approvals - ATEX Functional safety (SIL/PL) ...
TURCK
Voltage: 24 V
Current: 0.1 A
Power: 1 W
... Country of origin - DE Weight - 162 g Technical Data Signal type - Digital input Device type - Isolating switching amplifier Ex version - yes Approvals - ATEX Functional safety (SIL/PL) ...
TURCK
Voltage: 24 V
Power: 1 W
... Country of origin - DE Weight - 111 g Technical Data Signal type - Digital input Device type - Isolating switching amplifier Ex version - yes Approvals - ATEX Functional safety (SIL/PL) ...
TURCK
Binary explosion proof switching amplifier type ExBin-A for connection of 1, 2 or 5 passive potential-free sensors for use in HVAC systems. - Sockets for 1, 2 or 5 passive potential-free binary sensors ...
Voltage: 207, 253 V
Current: 2, 1 A
Frequency: 45 Hz - 65 Hz
This isolation is suitable for intrinsically safe applications. The device transmits binary signals from SN/S1N proximity sensors and approved mechanical contacts from the hazardous area/Ex area to safe areas.
Voltage: 20 V - 253 V
Current: 1 mA
Power: 1 W
amplifier filling level, Conductive, 23x114x99mm, 2 Channels,Clamp, IP20, Polyamide, With LED display Description Filling level sensors - Switching amplifiers Filling level and level ...
4-channel isolation switching amplifier with four separate output circuits INK 240 The INK 240 is a 4-channel isolation amplifier with four galvanically isolated output circuits, which ...
Voltage: 10 V - 30 V
Current: 10 mA
Frequency: 1 kHz
... Infrared Weight - 0,20 kg Ambient light immunity - 70 klx Switching hysteresis - < 15 % Reproducibility - < 1% No-load current - < 15 mA Voltage drop - < 1,5 V Switching frequency ...
Voltage: 96 mV
Current: 20 A
Frequency: 1,000 Hz
Description The CSA96 is a compact high power switching amplifier for linear / rotary magnetic actuators. It features a wide bandwidth current controller and can be directly connected on the mains to ...
Voltage: 0 V - 1,000 V
Current: 7 A
Power: 7,000 W
... 7 generates an output voltage up to 1000 V and an output current of 7 A. The switching amplifier RCV 1000/7 operates as an amplifier with energy recovery. This amplifier ...
piezosystem jena GmbH
Voltage: 0 mV - 10 mV
Current: 20 mA
• - Amplifier with integrated overload protection • - Input: 4x strain gauge • - Output: 2x standard signal; digital bus systems • - 8 digital switching outputs in accordance with EN ISO 13849-1 Applications The ...
Frequency: 100 kHz
JQM series switching power amplifiers embody the latest MOSFET technology, output power from 1kVA to 70kVA, a full range of air cooling. JQI series adopts the latest generation of IGBT soft switching ...
Please specify:
Help us improve:
remaining