- Packing - Handling - Logistics >
- Storage >
- Tank
Tanks
Capacity: 100 m³ - 350 m³
Alligator Winbag® Storage of sludge and liquids. • For the storage of all types of (mixed) slurries and non-aggressive liquids. • Capacity from 100 m³ to 350 m³. • Can be fully emptied by simply rolling it up. Using the Alligator ...
Albers Alligator
Capacity: 500 m³
... producing A-tanks. • For the temporary storage of drinking water. • Available up to 500 m³. • Available with an extensive accessory package. • Can be used on almost any flat surface. Various sizes Albers Alligator ...
Albers Alligator
Capacity: 2,000 m³
... modest height, the L-tank does not dominate the landscape. We recommend using a protective layer underneath the L-tank whenever you want to install it on a hardened surface. Reliable in all wind and ...
Albers Alligator
... transporting liquids through the use of flexible tanks has many advantages : • Lightness • Handiness • Adaptability • Fiability NAUTA® Flexible Tanks provide many advantages over rigid tanks ...
The NAUTA® tank for fuel, used water or oil, is very easy to store and transport. NAUTA® flexible portable tanks are a remarkable improvment over the traditional painted metal tanks. ...
... transporting liquids through the use of flexible tanks has many advantages : • Lightness • Handiness • Adaptability • Fiability NAUTA® Flexible Tanks provide many advantages over rigid tanks ...
Capacity: 100 l - 20,000 l
Storage tanks by POLO-LTS are suitable for storing liquid products such as: • honey • syrup • beer • wine • chocolate • caramel • ketchup • mustard • sauce • fat etc. OUTSTANDING FEATURES • capacities ...
Capacity: 50 l - 3,000 l
Vacuum tanks are designed for the preparation of various products under vacuum conditions. They can operate as part of production lines or as standalone equipment. Vacuum tanks are suitable for the ...
Capacity: 100 l
Pressure: 2.5 bar
FLOW-PILOT 100 regulator (medium-sized and large volumes) The FLOW-PILOT 100 regulator is the solution for optimizing level management under nitrogen pressure during filling operations. Installed between your filtration pallet (or ...
Capacity: 0.5 m³ - 20 m³
HOLDING TANKS (Agitators) FOR ADMIXTURES AND / OR LIQUID ADDITIVES To keep the produced admixtures and liquid additives, in suspension, in optimal conditions, METAX produces a wide range of holding tanks ...
Capacity: 55 l
The TBA irrigation Bag is the ideal watering solution thanks to its water drainage method. In contrast to normal watering, where the water cannot reach deep into the soil, this bag releases water gradually and only around the trunk, allowing ...
Shipping overseas - is fraught with danger, risk and extensive costs, especially when the products being shipped are liquids, particulates or semi liquids. Traditional methods of packaging are restrictive and made from expensive and non ...
The SmartTEH Ash Container is designed for collecting, storing, and transporting hot and cold ash, slag, wood chips, and other materials. It features a closed-type metal case with an openable cover, three control hatches on the sides, ...
Capacity: 48 l - 110 l
... produces polyethylene tanks for the nautical and caravan sectors provided with inspection plugs. They have a corrosion resistance and, if destined to contain drinking water, the non-toxicity of the raw material. The ...
Tekcnoplast
Capacity: 48 l
... produces polyethylene tanks for the nautical and caravan sectors provided with inspection plugs. They have a corrosion resistance and, if destined to contain drinking water, the non-toxicity of the raw material. The ...
Tekcnoplast
Capacity: 64 l
... produces polyethylene tanks for the nautical and caravan sectors provided with inspection plugs. They have a corrosion resistance and, if destined to contain drinking water, the non-toxicity of the raw material. The ...
Tekcnoplast
Bolted storage W-Tank is a light tank, easy to install and thanks to its corrosion-free composition. The plates of storage W-Tank® are manufactured by flex molding process. The Flex ...
TORO EQUIPMENT
The W-Tank ® model engineered by Toro equipment, is a sewage settling tank that features a capacity between 13 and 3.400 m3. It provides users an installation that has a low set up time and a short delivery ...
TORO EQUIPMENT
Capacity: 1.2 m³ - 12,535 m³
Modular storage and water treatment tanks manufactured by Toro Equipment in glass composite. The ideal solution in logistically challenging environments or with space and time constraints that require lightweight and ...
TORO EQUIPMENT
Capacity: 0 l - 20,000 l
HBE manufactures oil tanks and oil sumps conforming to DIN or to factory standards, but the vast majority are produced according to customer specifications. Both normal steel and stainless steel are used in production. HBE ...
The weldless WLST steel oil tanks manufactured in the deep-drawing process guarantee 100% leak-tightness and meet high requirements for a wide range of hydraulic applications. An epoxy powder coating in RAL 7011 (iron ...
... aluminium oil tanks ensure space-saving warehousing and low freight costs thanks to their stackability and low weights. The stable casted bodies have a good heat dissipation due to the aluminium material and all-round ...
Capacity: 500, 1,000 l
Fish Vats (with outlet door) Boleto Fish Vats is solidly constructed of stainless steel of high quality. The Boleto Fish Vats is equipped with a fish outlet and the bottom of the fish vat is designed so that the fish via gravity will ...
Knife disinfection tank with electrical resistance, with and without overflow. Features: Capacity for 12 knives. Disinfection system by heating the water up to 82°C. DT30 and DT30R To be fitted to HW11 washbasins. DT31 ...
INOXSIS
Knife disinfection tank with electrical resistance. Features: 2000 W electric heater with thermostat. Constant level, insulation and disinfection of handles included. Capacity for 70 knives, 2 axes.
INOXSIS
Knife-holder disinfection tank with electrical resistance. Features: Heating by 6000 W electric resistance with thermostat. Water inlet valve ¾ ”outlet 1”.
INOXSIS
Capacity: 5 m³ - 30 m³
... External or internal storage of bulk liquid raw materials from tankers or in any other form with dedicated loading system. The tanks directly feed production via transfer and dosaging lines. ACCESSORIES • Double wall ...
Capacity: 3,000 l - 11,000 l
The milk is heated up to leavering temperature in the Cheese Process Tank. When milk is transformed into curd before being cut by special mixers inside the tank. Capacity: 1000, 1500, 2000, 2500, 3000, ...
STK Makina
Cooling Tanks These tanks enable cooling of ice cream mixture up to +4 oC. On the other hand, milk cooling tanks are used to cool milk until 4 C. It is one of the products that ...
STK Makina
Capacity: 1,000 l - 5,000 l
Ayran Process Tank Buttermilk Process tank features cooling and heating properties. Milk enters the tank and gets heated up to leavening temperature. When the leavening is realized; ...
STK Makina
Capacity: 15,000 l
Vertical oversize, material carbon steel, Fluid content Compressed air, Finishing Internal and esternal hot-dip galvanization, Upon request inspection ports
Baglioni
Capacity: 10,000 l
Pressure: 42 bar
Material: carbon steel, Media content: compressed air / nitrogen (group 2) Treatment: Blue Ral 5015 exterior paint (standard)
Baglioni
Capacity: 20,000, 15, 10, 5 l
Pressure: 16, 11, 32, 21 bar
Material: carbon steel • Fluid content: compressed air / nitrogen (Group 2) • Finishing: external Ral 5015 blue paint (standard) and internal and external hot-dip galvanization • Upon request: 1” couplings on heads
Baglioni
Capacity: 22 ml - 45 ml
Pressure: 0 psi - 1,700 psi
... disc, for use in ovens. See Parr 4700 Vessels for Oven Use for more information. These vessels are normally heated in ovens, baths, or similar general purpose heating devices. Special heaters for ...
Parr Instrument Company
Capacity: 25 ml - 75 ml
Pressure: 0 psi - 8,500 psi
These High Pressure/High Temperature Vessels have a 1-inch inside diameter and offer volumes of 25 or 75 mL. These vessels are closed with an alloy steel screw cap which includes six cap screws to develop ...
Parr Instrument Company
Capacity: 25 ml - 100 ml
Pressure: 0 psi - 3,000 psi
... Use of the Series 4790 Vessels also helps minimize the quantities of waste products which may require special disposal procedures. These micro vessels have been designed to provide as many of the features ...
Parr Instrument Company
Capacity: 10 l - 200 l
A complete range of oil tanks that can be installed on the side, behind the cab or internally on the subframe. Available in various materials and finishes, with capacities from 10 to 200 litres.
Melting Tank 1 liter with stirrer and gear doser. Labo unit for filling cosmetic products up to 130°C Minimum dosing 0,2 ml and maximum dosing unlimited The dosage is constan, accuracy +/- 0,5% One filling nozzle ...
Cosmatic S.r.l.
Capacity: 1,055 l
... is a type of a water tank. This water tank is made up with a high density and UV-preserved polyetheylene structure. It is equipped with a valve places at the bottom and a frame made up of steel tubular. ...
Capacity: 70 l
For shrink packages HENKOVAC IMMERSION TANK 40-60 FULL STAINLESS STEEL | INSULATED TANK Machine dimensions 1050 x 700 x 1550 mm Immersion platform 570 x 400 mm Stroke dipping table 300 mm Max ...
Henkovac
The oil separated from the oil storage tank-animal harmless disposal equipment is transported to the heating and stirring tank (heated by steam, with the temperature controlled at 80℃-90℃) through the ...
... ATTSUKLAUS we are experts in electric machines impregnation process involving polyester, epoxy and silicone resins. Available tanks: Designed for vacuum. Including agitators for temperature homogenization and additives ...
... to penetrate into the component. At the end of the cycle, the resin is returned to the storage tank under vacuum. As an alternative to the storage tank, the resin can be placed in baths inside the ...
... solution is offered, consisting of a storage tank for the impregnation product, the autoclave, and the connection for transferring the product between them. As an alternative, the autoclave can be offered without a tank; ...
Refrigerant receivers We offer various receivers for accumulation and storage of HFC refrigerants in cooling plant: vertical receivers horizontal receivers Receivers can be equipped optionally with level indicator, shut-off ...
Climarem
Capacity: 5 m³ - 2,090 m³
... accumulation and storage of liquid coolants are manufactured in 4 series of types: Horizontal vessels Vertical vessels Horizontal vessels Vertical vessels
Climarem
Air receivers We are producing air receivers used in following installations: Damping of pressure pulsation in paper-pulp transporting pipelines Ships' engines start-up systems Systems of pneumatic tools
Climarem
Capacity: 0.5 m³ - 1 m³
... opening at the bottom can then be connected to a mains foul drain or containment tank. The toilet disposal tanks are made from heavy duty GRP and can be installed into a separate hard standing or to ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining