- Ground Resistance Ohms 20-200-2000 - Bottom shockproof molded - Continuity test beep sound is 200 Ohm - 200 kOhm - Key lock to maintain the continuous measurement - Measure voltage 1000VDC 750VAC - Comes with 8 x ...
Standard Features The system features advanced, user-friendly Micro-Processor Control, which comply with current USP, IP and EP specifications. It has a splash-proof keyboard, moulded water bath – enabling comparative studies – ...
GBW-60B Computer Control Cupping Testing Machine GBW-60B computer control cupping testing machine mainly for the test of the metal sheet and strip, according to the national standard GB / T 4156-2007, it can test the plastic deformation ...
BT-60 Manual Cupping testing machine Cupping testing machine, designed according to GB/T 4156-2007, is used to evaluate the resistance of metal materials to the anti-cracking or anti-separation of metal substrates after being subjected ...
... provides on or off site verification of RCD testers, Loop testers, Continuity and Insulation testers and multifunction testers. The 2080 is simple to use and provides ...
6080A BATTERY POWERED PAT TESTER • Standalone battery operation • 230V and 110V appliance testing • Visual pass/fail test indicator • Bond current @ 25A/10A/100mA • Insulation resistance @ 500V ...
... • Leakage Current @ 230V Re-defining rapid safety testing, the Transmille 5080 battery powered portable appliance tester provides simple, fast and safe PAT testing for both independent contractors and in house ...
The HVA28 and HVA28TD are truly compact and portable VLF test sets which determine the condition of medium voltage cables. HVA28TD device includes integrated Tan Delta diagnostics capabilities, in comparison to HVA28 device, which can ...
b2 electronics GmbH
... diagnostics unit enables a straightforward condition assessment of the cable system. The new HVA68TD is more than just a VLF tester. In addition to VLF testing & Tan Delta diagnostics capability, it allows to pre-locate ...
b2 electronics GmbH
The HVA34-1 and HVA34TD-1 are truly compact and portable VLF test sets which determine the condition of medium voltage cables. HVA34TD-1 device includes integrated Tan Delta diagnostics capabilities and features TD leakage current correction ...
b2 electronics GmbH
MINIVAP VP Vision is a highly versatile portable vapor pressure tester that features best-in-class precision and a pressure range of 0-2000 kPa. It is the first analyzer that demonstrates excellence in engineering by ...
... Up to 2 different sample streams can be connected to one single analyzer. It is the only available process vapor pressure tester that fully complies to the industry relevant ASTM standards for gasoline (ASTM D6378), ...
The flash point tester MINIFLASH FP Vision is uniquely designed to determine the flash points of liquids and solids. The analyzer uses Grabner flash point detection method, which is triggered by an energy-controlled electric ...
The CRIT 100 controls the charge of static electricity and the insulation of operators and equipment before entering a pyrotechnical area, where user’s safety is at stake. Dual detection of resistance thresholds: • Maximum value ...
EASYLAN is a powerful LAN tester for certification of copper cables, optical cables and networks up to 30 MHz. It stores up to 1,700 tests managed by sites and enables users to issue comprehensive certification reports ...
Two-pole voltage testers, such as the PeakTech 1090, are ideal for quick and uncomplicated voltage measurements. This model is TÜV / GS tested for special user safety and has an easy-to-read LCD display with backlight ...
Peaktech
Leakage tests of sewer pipes are carried out after the completion of the construction of a new pipe network, during the inspection of old distribution network or after the reconstruction of pipes or sewers. IBOS a. s. offers modern equipment ...
Temperature controlled battery short circuit tester This equipment is designed based on the requirements of various battery short-circuit test standards. According to the standard requirements, the short-circuit ...
Dongguan Hongjin Test Instrument Co.,Ltd.
MIT folding tester MIT folding tester is a special instrument for measuring the folding fatigue strength of paper, cardboard and other sheet materials. According to the international common MIT folding ...
Dongguan Hongjin Test Instrument Co.,Ltd.
The battery pack external fire test machine is mainly used for the safety verification test of PACK level battery packs or systems and structural parts, and is used to evaluate the safety performance of the battery. The external fire ...
Dongguan Hongjin Test Instrument Co.,Ltd.
AD11 Waterproof pH-TEMP Pocket Tester with replaceable electrode AD11 is the most advanced microprocessor based Waterproof pH/Temp pocket tester in the market. Fast, stable and precise, these testers ...
The Beha-Amprobe NCV-1000-EUR VOLTfix Non-Contact Voltage (NCV) tester series provides maximum safety and convenience for detecting AC voltage without interrupting electrical systems. Designed to conveniently fit in your ...
BEHA AMPROBE
The test units enable versatile deployment options in manual or automated systems for the insulation resistance testing of electrical appliances and insulation materials. The switchable measurement range also enables flexible adjustment ...
ELABO
Strength test of a ultrasonic welding Customized Solution Component supply and emissions over hand-operated turret Application • Quality assurance in the electronics industry. • Batch testing; Test equipment for testing ...
URYXXON® Relax – automated urine analysis at the point of care The URYXXON® Relax provides dependable urine status results to detect early stages of many diseases such as diabetes, kidney disease and urinary tract infections. Instrument-read ...
MACHEREY-NAGEL
From a voltage of 12 V, the non-contact voltage tester Testboy 114 detects a live conductor, amongst others, also in the low volt systems. Due to the capacitive measurement procedure, invisible brakes in the cables or ...
Testboy
The Testavit Schuki 1A and 3A socket outlet testers are essential test instruments for all professional tradesmen. They indicate all connection errors that are a risk to life at the sockets, cable drums and connection ...
Testboy
The extremely versatile continuity tester Testboy 2 offers an insulated, shock-resistant and break-proof plastic housing. The pluggable and screwable connection between the test leads and the terminal post is safe to ...
Testboy
CDV BT SVVI will allow you to conduct the leak detection tests necessary to comply with sanitary and quality requirements of the food, cosmetic and or pharmaceutical industry. They are equipped with a system controlled by a digital ...
CDV FS SVVI will allow you to conduct the leak detection tests necessary to comply with sanitary and quality requirements of the food, cosmetic and or pharmaceutical industry. They are equipped with a system controlled by a digital ...
The surface quality and the efficiency in surface conditions of sheet Micro Ohmmeter metal / plates can measure with the resistance measurement system MRP29HY. The MRP29HY consists of a micro-ohmmeter and a hydraulic press, the engineering ...
The MR12SPX and its measuring probe are used for inspection and quality control of carbon strips of current collectors used by electrical powered trains, electric trams, trolley buses and similar vehicles. Here the current collectors ...
PTBA 211E ampoule breakpoint tester to control the quality during production of empty ampoules The PTBA 211E ampoule breakpoint tester is designed and manufactured in compliance to the DIN EN ISO ...
Pharma Test Apparatebau AG
Tapped Density and Apparent Density Testing Instrument The PT-TD300 is used to test the tapped (or “tamped”) density and apparent density of powders, granules, pigments and similar products in compliance with the current USP methods ...
Pharma Test Apparatebau AG
The SPT-6 Suppository Penetration Test assembly is used to determine the softening time of six samples at the same time. It is connected to a Pharma Test PTZ AUTO or PTZ-S tablet disintegration test instrument. The SPT-6 assembly can ...
Pharma Test Apparatebau AG
... Series offers the perfect entry-level devices for the world of dissolution testing. The perfect entry-level dissolution tester. High-head with 6 test stations Dimensions (width / depth / height): 510 mm / 450 mm ...
ERWEKA
The ERWEKA DT 950 Series is our first digital dissolution tester on the market, equipped with the most advanced technology for the requirements of today and the challenges of tomorrow. With state-of-the-art embedded ...
ERWEKA
With the ERWEKA RRT 10, automatic dissolution testing of different extended and sustained release dosage forms has become easier than ever before. This unit is perfectly suited for simulating the pH-changes within the human body. By placing ...
ERWEKA
* Each axis ( X, Y, Z direction ) electromagnetic field measurement. * Sum of XYZ electromagnetic field measurement. * Real time data logger, save the data into the SD memory card and can be downloaded to the Excel, extra software ...
Lutron
•Reproducible measurement of wear and scratching restistance •Fast and easy measurement of layer thickness •Comfortable operation •Suitable for hard material films, lacquers, plastic coatings etc. •For quality assurance and coating ...
Mask Synthetic Blood Penetration Tester GT-RA01 Product Introduction Application: Mask Synthetic Blood Penetration Tester determine the resistance of medical protective masks to the penetration ...
GESTER
• Automatic ferrous / non-ferrous substrate material measurement • Non-magnetic coating on ferrous metal substrate and insulating coating on non-ferrous metal substrate measurement • Audible and visual warning when tolerance limits ...
TES Electrical Electronic Corp.
• Test Condition Without Shutting Down Battery. • Simultaneously Measure Battery Resistance, Voltage, Current, Temperature. • Auto-hold and Auto-data storage. • Comparator Function. • Rates Conditions as Pass, Warning, or Fail. • ...
TES Electrical Electronic Corp.
• Test Condition Without Shutting Down Battery. • Simultaneously Measure Battery Resistance, Voltage. • Comparator Function. • Rates Conditions as Pass, Warning, or Fail. • Compact and Lightweight.
TES Electrical Electronic Corp.
TL-CF2 is a Flame Detector tester for UV/IR and IR3 Model to verify its response within a short distance. • Approval for Explosion-Proof • Portable device • Specialized for Rezontech UV/IR and IR3 type of flame ...
REZONTECH
TL-205 is a UV/IR Flame Detector tester to verify response of UV/IR type of Flame Detector within a short distance. • Portable device • Specialized for Rezontech UV/IR type of flame detector • Suitable for hazardous ...
REZONTECH
TL-3000 is a IR3 Flame Detector tester for RFD-3000, RFD-3000X Model to verify its response within a short distance. • Portable device • Specialized for RFD-3000, RFD-3000X Models • Suitable for hazardous areas ...
REZONTECH
Please specify:
Help us improve:
remaining