... hammer drilling, the shank adapter transmits impact energy from the piston to the rod(s) or tube(s). Additionally, rotation torque is delivered via the shank adapter. Product Name:High Quality and ...
Diameter: 0.5, 0.38 in
TURALI HOLDING
Diameter: 44.45 mm - 69.85 mm
Length: 152.4 mm - 207.8 mm
Properties and application: ISO (DIN2080) adapter for tools with ISO shank (DIN2080) Taper shank with internal drawbar thread Both external and internal tapers are ground
Features Central fixing Washer and nut attached Article FSK1-SW10-M31M - Multimode FSK1-SW10-K31M - Multimode FSK2-SW10-K31S - Singlemode
EUROMICRON Werkzeuge GmbH
Hexagonal adapter, metric thread • Material: OT58 (Brass) • Surface treatment: Nickel-plated • Operating temperature: -60°C ÷ 200°C
Berardi Bullonerie srl
BS010 MALE ADAPTOR FACTORY PIPE-WORKSHOP FITTING WORKSHOP MOULDS WAREHOUSE MATERIAL PREPARE MATERIAL TESTING PRESSURE TESTING FOR VALVES PACKING LINE WAREHOUSE LOGISTICS SAMPLE DISPLAY SHOWROOM
Yonggao Co., Ltd.
Diameter: 16, 20, 12, 15, 10 mm
Length: 48 mm - 76 mm
Hose adapters GN 480.7 can attach e.g. air nozzles or coolant nozzles and their feed pipes with mountings clamps and hold them in position. The d2 / d3 thread and barbed fitting diameters are compatible ...
Diameter: 4.85 mm
Length: 0.2 m
... connector type 3 - straight Coding of M12 connector 3 - A coded Matl threaded ring conn 1 - GD-Zn, Ni Matl threaded ring conn 2 - GD-Zn, Ni Material threaded ring conn ...
Diameter: 12 mm
Length: 45 mm
... connections - 3 Piece(s) Type of connection - Connector Thread size - M12 Type - Female No. of pins - 5 -pin Encoding - A-coded Version - Axial Type of connection - Connector Thread size ...
This adapter unit connects to the Main Body T-A20 which enables Multi-point measurements through a LAN (10 Base-T) category 5 straight cable that connects to the Adapter Unit for receptor head T-A21.
Adapter Unit for Receptor Head T-A21 connects to the adapter unit for Main Body T-A20 which enables Multi-point measurements or cable extension for measurements.
... immediately. Simple M12 and M8 threaded connections for easy installation where needed in the circuit M8 devices incorporated into an M12 ecosystem enable communication with IIoT platforms like Snap Signal Wiring ...
SATI stands for Stand Alone Trimming Interface. It enables zeroing and trimming of the encoder after it has already been installed. Successful trimming process done with SATI improves the system’s absolute position error down to ±0.2°. ...
The E201-9S interrogates an SSI or BiSS encoder and allows the data to be read by a PC using simple ASCII commands over the USB connection. E201-9S supports unidirectional communication for absolute SSI and BiSS C encoders (without ...
For use with BiSS-C bidirectional encoders (Orbis and AksIM only) EncoSight software available under Download Electronic data sheet, encoder status, position, configuration and calibration are easily accessible via EncoSight application
Diameter: 0.13 in - 2 in
Gas - NPT adapters These adapters allow using NPT threaded fittings on vacuum components with NPT threading, such as vacuum components like vacuum cup supports, valves and solenoid ...
Diameter: 0.25, 0.38, 12, 10, 8 in
Length: 14 mm - 48 mm
Adapters These standard accessories offer the user different assembly options. The galvanised steel or brass adapters screwed onto the standard vacuum cup support connections can vary the threads ...
Diameter: 22, 28, 18.5 mm
Length: 185, 235 mm
For ScrewFit front pieces With preset vibration damping
... shapes of thread adapters are aligned perfectly to our switches Thread adapters are supplied with seals Thread adapters Thread ...
SUCO Robert Scheuffele GmbH & Co. KG
► Special features With choice of female or male threads Available with integrated vacuum generator
... Here, the damper can alternatively be screwed on using the external thread of the side load adapter. Consisting of a piston rod and housing made of stainless steel, the side load adapter ...
Application : Insulating adaptor, with 1/4'' hexagonal male fitting and 3/8'' drive square. For use with screwing standard hand machine. Features : Operating voltage up to 1 000 V AC - 1 500 V DC. In accordance ...
Length: 80 mm - 218 mm
REDUCING SLEEVES PRECISION VERSION DIN 2185 APPLICATION for tools with morse taper
M8x1/ M12x1/ 7/8" T-Splitter/Adapter Junction systems are used anywhere sensor and actor signals need to be extended quickly and easly for connection to their superordinate control systems. Individual signals are either ...
Universal thread adapter for nearly all drums and other containers with opening of 48–75 mm in diameter, regardless of the respective thread. The thread adapter can be ...
... small size, this adapter is easy to use on the move. The 15 cm cable makes positioning easier and reduces the pressure on the door in the event of movements. Simply connect the USB connector to the port, the network cable ...
... 0981 ENC 100 Description:RJ45/M12 adaptor for Industrial Ethernet, female receptacle connector M12, D coding, chassis side thread PG 9, RJ45 female connector, 90 degree Availability:available Number of contacts 4 Color ...
End Rod Thread Adapters Part From To Number (Internal) (External) 161-009-001 1/4-28 3/8-28 161-009-003 10-32 5/16-24 161-009-005 1/4-28 3/8-16 161-009-006 5/16-24 3/8-24 161-009-007 10-32 1/4-28
SONIC COLLAR FOR CONSTANT FLOW VENTURI 10NL/MN ATEX - No
SAPELEM
Adapter sleeves are connecting elements for roller bearings with a conical inner ring. Tightening the groove nut draws the conical sleeve between the shaft and inner ring of the bearing and clamps it there. The lock washer ...
Please specify:
Help us improve:
remaining