Threaded flow meters

Process pressure: 16 bar
Precision: 0.5 %

... of electromagnetic flowmeter display part flow meter and wireless communication module. The wireless communication module is equipped with IOT network card, that is SIM card. Its ...

Process temperature: -50 °C - 500 °C
Process pressure: 25, 100 bar
Precision: 1 %

ADF280 series V-cone flowmeter is a new type of throttle device based on the measurement principle of venturi tube and combining the advantages of venturi tube, annular orifice plate and wear-resistant orifice plate. ...

Volumetric flow rate: 0 m³/h - 305,000 m³/h
Process temperature: -20 °C - 150 °C
Process pressure: 0 psi - 9,000 psi

... Turbine Flow Transmitters are accurate instruments for measuring flow rate and flow volume of low to medium viscosity liquids in a pipe and produce electrical signals (pulse or current ...

Process temperature: -20 °C - 160 °C
Process pressure: 1, 2.5, 4 MPa

... the flowmeter for 4~20mA output, RS485 communication. In addition to measuring general liquids, electromagnetic flowmeters can also measure some types of solids, such as liquid-solid mixed fluids, high ...

Process temperature: -40 °C - 300 °C
Process pressure: 16 bar - 420 bar

LTD Series General Electron Flowmeter (hereafter call flowmeter), is a precise flowmeter to measure the flow of liquid in the tube. This flowmeter is a patent right product, ...

Volumetric flow rate: 10 l/h - 150 l/h
Process temperature: 80 °C
Process pressure: 5 bar

... precise dosing possible High resistance Wide range of viscosities can be covered Can also be used for pulsating volume flows Low pressure loss

Volumetric flow rate: 16,000 l/h - 160,000 l/h
Process temperature: 0 °C - 60 °C
Process pressure: 10 bar

Variable area flowmeter Measuring range 16000.0 - 160000 l/h, connection 2" Inch NPT EPDM female thread ANSI B1.20.1 for air mark: - Different media are available upon request mark 2: - standard ...

Volumetric flow rate: 0.6 l/min - 700 l/min
Process temperature: -40 °C - 120 °C
Process pressure: 150, 250, 300, 420, 160 bar

The FTB200 series flowmeter contains a magnetic detector and a magnetically permeable rotor (impeller). The flow of the medium drives the rotor (impeller) to turn. The rotational speed of the rotor (impeller) ...

Volumetric flow rate: 30 l/h - 640,000 l/h
Process temperature: 0 °C - 140 °C
Process pressure: 0 bar - 11 bar

Magnetic inductive flow and volume measurement of media with a minimum conductivity >5 µS/cm For liquids, mash and pastes with solids content < 5% Long life span due to moisture proof and corrosion resistant design Vacuum ...

Volumetric flow rate: 1 m³/h - 4 m³/h
Process temperature: 50 °C
Process pressure: 0.3 bar - 16 bar

... starting flow and is permitted for all installation positions. The meter is equipped with an 8-digit glass/copper register (IP68) and a modulator disc. This enables electronic, non-reactive scanning ...

Volumetric flow rate: 0.5 l/min - 1,200 l/min
Process temperature: -40 °C - 350 °C
Process pressure: 0 bar - 150 bar

... ratings. The threaded versions of the Metri Paddlewheel flow meter will withstands pressures up to 100 bar as standard with higher pressure options also available. Metri LPM paddlewheel ...

Volumetric flow rate: 10 l/min - 280 l/min
Process pressure: 500,000 Pa
Precision: 1 %

... precision 2.Good repeatability 3.Simple structure & operation 4.Wide measurement range GTF600 turbine flowmeter is a kind of speed meter, it has high precision, good repeatability, simple ...

Process temperature: -20 °C - 120 °C
Process pressure: 0 MPa - 6.3 MPa

... than 5×10-6m²/s, flowmeter can be used after calibration in real liquid. If matched with a display instrument with special functions, it can also perform quantitative control, over-quantity alarm, etc. It is an ideal ...

Process temperature: -20 °C - 60 °C
Process pressure: 0.6 MPa - 42 MPa
Precision: 0.5 %

... for users; 4.Multiple work mode: W803E has ‘Flow Only’ mode, ‘Flow + Pressure’ mode, ‘Flow + Temperature’ mode for users. Compared with other liquid type flow meter, ...

Process temperature: 26 °C
Process pressure: 150 psi

METER's new flow meter offerings combine the accuracy of positive displacement meters with the reliability and economy of nutating disc technology. Constructed out of ...

Volumetric flow rate: 10 l/min - 100 l/min
Process temperature: -40 °C - 80 °C
Precision: 0.5 %

... Series 1" DIGITAL FLOW METER are suitable for flows between 6 - 120 L/min (1.59 - 31.70 GPM), providing highly accurate flow measurement performance. The MX Series offers ...

Volumetric flow rate: 0.8 l/min - 90 l/min
Process temperature: -30 °C - 80 °C
Process pressure: 16 bar

Flowmeter incl. measurement section with threaded connection R 1/4, DN 8, Measuring range 0.8 - 90 l/min, PN max. 16 bar Calorimetric measurement system for monitoring changes in flow ...

Volumetric flow rate: 20 l/min - 120 l/min
Precision: 1 %

This flow meter is to measure the exact quantity of the dispensed fuel. They are designed for non-commerical use only. These flow meters are reliable, inexpensive, easy ...