Length: 30 mm
Measuring range: 2, 4 mm
Process temperature: -25 °C - 80 °C
Inductive round sensor – M8 – Length 30mm Non Flush – Sensing distance 4mm PNP NO output – M8 male connector connection
Comepi srl
Measuring range: 3 mm - 8 mm
Process temperature: -25 °C - 80 °C
Capacitive Proximity Sw. M18 Shielded,M12 Plug, 20-250VAC AC NO Sn=3 to 8mm Adj. Plastic Body Key Features • DC or AC supply voltage • High noise immunity • Shielded and unshielded models • Sensitivity adjustment • ...
Measuring range: 2 mm - 16 mm
Process temperature: -25 °C - 80 °C
Capacitive Proximity Sw. M30 Shielded, M12 Plug, 10-40VDC NO/NC PNP, Sn=16mm Thermoplastic Polyester Body Key Features • DC or AC supply voltage • High noise immunity • Shielded and unshielded models • Sensitivity ...
Measuring range: 0.8 mm - 1.5 mm
Process temperature: -25 °C - 70 °C
... various installation scenarios. The sensor is CE certified with IP67 protection grade. Description Lanbao inductive sensors are used everywhere in industrial fields.LR5 series cylindrical inductive ...
Shanghai Lanbao Sensing Technology Co., Ltd.
Measuring range: 1.5 mm - 4 mm
Process temperature: -25 °C - 70 °C
... , is suitable for various installation scenarios. The sensor is CE certified with IP67 protection grade. Description Lanbao inductive sensors are used everywhere in industrial fields. The sensor ...
Shanghai Lanbao Sensing Technology Co., Ltd.
Measuring range: 2 mm - 4 mm
Process temperature: -25 °C - 70 °C
... 0-20mA four analog output mode can be selected, the sensor output signal is strong. The sensor is CE and UL certified with IP67 protection rating. Description The analog output inductive sensor ...
Shanghai Lanbao Sensing Technology Co., Ltd.
Measuring range: 0 mm - 10 mm
Process temperature: -20 °C - 60 °C
The high temperature sensors should be considered as part of the traditional range of sensors with the difference that electronic portion is completly separate from the sensing part which is in the form ...
AECO
Measuring range: 0 mm - 25 mm
Process temperature: -20 °C - 70 °C
... capacitive sensors. Our SCM housing is made of non-toxic plastic material (POM), natural Ultraform S2320, suitable for food applications. Temperature range from -20 ÷ + 70°C, max pressure inside the tank no greater ...
AECO
Measuring range: 0 mm - 25 mm
Process temperature: -20 °C - 70 °C
... specifications include 3 and 4-wire, amplified direct current sensors and 2-wire, amplified alternating current sensors. The capacitive proximity sensors consist of ...
AECO
Measuring range: 90 mm
Process temperature: -20 °C - 85 °C
... .0mm, and has a M18 thread diameter. Specifications Contact Resistance: 80 m’ohms Max Switching Voltage: 1500 Vac Switching Current: 3.0A Switching Distance: 15.0mm Min Size: Length: 90.0mm (3.543in) Diameter: ...
The Comus Group
Measuring range: 3 mm
Process temperature: -20 °C - 86 °C
The PTB 130/30 is a magnetic reed proximity switch manufactured by Comus Group. It is made in contact from and is usually closed. This proximity switch offers a maximum ...
The Comus Group
Length: 30 mm
Width: 30 mm
Measuring range: 15 mm
- With LED operation indicate lamp, easily identifi able - Standard sensing object: ferrous metals - Over-current and short circuit protection; against polarity reversal. - Over-current and short circuit protection; against polarity ...
The Comus Group
Measuring range: 4, 2.5, 2, 1.5 mm
Measuring range: 12, 8, 5 mm
Length: 25, 20 mm
Measuring range: 1.5, 2.5, 0.8 mm
Process temperature: -20 °C - 60 °C
... 2-6 Safety parameters: • Vi max: 13,5 V • Ii max: 60 mA • Ci max: 100 nF • Li max: 100 μH • Pi max: 200 mW These sensors must be used in conjunction with associated apparatus (See Sect. E) Use in hazardous ...
BDC ELECTRONIC S.r.l.
Length: 30, 50 mm
Measuring range: 5, 4, 2, 8 mm
Process temperature: -20 °C - 60 °C
... 2-6 Safety parameters: • Vi max: 13,5 V • Ii max: 60 mA • Ci max: 100 nF • Li max: 100 μH • Pi max: 200 mW These sensors must be used in conjunction with associated apparatus (See Sect. E) Use in hazardous ...
BDC ELECTRONIC S.r.l.
Length: 35, 55 mm
Measuring range: 20, 15, 10 mm
Process temperature: -20 °C - 60 °C
... 2-6 Safety parameters: • Vi max: 13,5 V • Ii max: 60 mA • Ci max: 100 nF • Li max: 100 μH • Pi max: 200 mW These sensors must be used in conjunction with associated apparatus (See Sect. E) Use in hazardous ...
BDC ELECTRONIC S.r.l.
Process temperature: -25 °C - 70 °C
Inductive proximity sensors detect the presence or absence of ferromagnetic metal masses within a limited operating range, without contact and with high accuracy. They are also suitable for use in harsh ...
Measuring range: 0.2 mm - 4.2 mm
... setting and calibrationnts The PPT "Eagle" family is a new generation of smart proximity probes used for non-contact measurement of vibration and shaft position. The sensor is designed with integrated ...
Measuring range: 1.5 mm - 40 mm
... in particular. Unlike these, conventional proximity switches with maximum operating frequencies of 200 Hz to 2 kHz are comparably slow. Apart from the high maximum possible operating frequencies these ...
KLASCHKA Industrieelektronik
Measuring range: 1.5 mm - 40 mm
... the switch. The proximity switches of the Series All Metal Automative made by KLASCHKA have an ironless coil in connection with an ironless housing. The housings are Teflon-coated, the sensing faces are ...
KLASCHKA Industrieelektronik
Measuring range: 0.8 mm - 70 mm
The series ferrous 3- and 4-pole comprises the „orthodox" Inductive Proximity Switches, which have been developed in the last decades under consideration of the special requirements of our customers. This series is standardized ...
KLASCHKA Industrieelektronik
Measuring range: 4, 8 mm
Capacitive sensors are designed for non-contact sensing of metal and non-metal objects. The operating distance of capacitive sensors can vary considerably. Conductive materials can be detected at the ...
Measuring range: 1 mm
Sensors with hall elements detect magnetic targets for monitoring rotational speed or directions. Hall effect sensors from Pulsotronic detect permanent magnets as well as polarised tapes in extremely ...
Pulsotronic
Measuring range: 2, 4 mm
The VM series is a 2-wire inductive proximity sensor, manufactured by Micro-Detectors. This particular model is an AC M12 inductive proximity sensor with a cable and ...
Description One-piece non-contact solid-state position sensors that operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a sinking current output Features ...
CHERRY
Measuring range: 4 mm - 7 mm
... concealed installation •Application-dependent combination of sensor and actuator(e.g. sensor concealed behind stainless steel, actuator in stainless-steel housing in process zone) The M18 safety sensor ...
ELOBAU
Measuring range: 0.08 in - 0.71 in
... on all models 600 Series Proximity Sensors are active digital sensing devices that generate one pulse per pass of an actuating target within their sensing field. No direct contact with target material ...
Measuring range: 9 mm - 11 mm
These versions of the venerable FL7M series DC-2 wire proximity sensors combine a variety of ant-spatter measures that make them ideal for welding processes particularly on the automotive production ...
Azbil North America
Measuring range: 3.81 mm - 12.7 mm
Reed position sensors with normally open or closed contacts that change states when a magnetic field is applied. The sensors act as non-latching electrical switches Features • Contacts hermetically ...
Measuring range: 20 mm
The PCA22320 is integrated with a 2 meter PVC cable. The device functions in an operating temperature of -25°C, to more than 75°C. The unit features an external dimension of 80 mm, and section wire size of 2 x 0.34 mm2. The product is ...
celduc relais
Intrinsically Safe 11 mm Bently™ Compatible Proximity Probes Temperature Range: -49 to 212°F (-45 to 100°C) Material: FEP (Flouroethylene Propylene) Jacket Cable Jacket with 316L Stainless Steel Probe Body
AS1010 Actuator Magnet Sensors Easy to install actuator magnet with threaded aluminium housing South-pole facing Alnico magnet Adjustable threaded mounting stud ...
Measuring range: 8 mm
Capacitive Proximity Sensor, Flush and Non-flush mountable, Adjustable 0,5-8mm, Power Supply 10-40VDC, PNP/NPN Output, N.O. or N.C., Connector M12, Housing M12 x 80mm, Tripleshield, Improved EMC performances, ...
Carlo Gavazzi Automation SpA
The proximity inductive sensors are electronic commutation elements that work without fisical contact.They are employed for electronic circuits control. The inductive sensors are widely ...
... The working principle of the magnetic proximity switch is to change the position and polarity of the trigger to make the sensor. A magnetic field is generated around the sensor ...
Soway Tech Limited
... electromagnetic brakes or Electromagnetic actuated brakes 24V and 205V DC - 230V AC. • Encoders from 100 to 1200 points/tr. • Sensors 24V DC NPN or PNP. • Etc...
Please specify:
Help us improve:
remaining